Tender For Construction Of Toilet At Lb Anchalik Nodal High School, Barunadiha In Kendrapada District Under Csr Fund For The Year 2025-26
Tender Value
14.71 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
14 days left
EMD
14700
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet At Lb Anchalik Nodal High School, Barunadiha In Kendrapada District Under Csr Fund For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKSEarth work in ordinary soil with 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge |
| 2 | Supplying, filling in foundation and plinth with sand well watered and rammed in 22.5 cm. (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete. |
| 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 4 | Fly ash brick masonry in cement mortar (1:6) in foundation & plinth using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg./cm2 dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least of six hours before use including cost, conveyance, royalties and taxes of all materials with all labour and T & P required for the work complete in all respect in all floors. |
| 5 | R.C.C. work of M25 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T & P required for the work etc. complete in all respect. |
| 6 | Base & Footing |
| 7 | Plinth Beam |
| 8 | Column/Beam |
| 9 | Lintel Band |
| 10 | Roof Slab |
| 11 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rods or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors. |
| 12 | Fly ash brick masonry in cement mortar (1:6) in super structure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg./cm2 dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least of six hours before use including cost, conveyance, royalties and taxes of all materials with all labour and T & P required for the work complete in all respect in all floors. |
| 13 | Fly ash brick masonry in cement mortar (1:4) in super structure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg./cm2 dimensional tolerance + 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least of six hours before use including cost, conveyance, royalties and taxes of all materials with all labour and T & P required for the work complete in all respect in all floors. |
| 14 | 12 mm. (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T & P required for the work etc. complete in all respect. |
| 15 | 16 mm. (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after raking out the joints including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete. |
| 16 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment with cost, conveyance, royalties and taxes of all materials with all labour and T & P required for the work etc. complete in all respect. |
| 17 | Providing and laying 300mmx300mm ceramic floor Tiles confirming to IS: 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.7 kg of organic coated filler of desired shade (0.1kg of hardener and 0.2 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materils, cost of all labour, conveyance, royalties, loading, unloading, watering and curing, T&P,etc.complete as per the direction of the Engineer-in-Charge. |
| 18 | Supplying, fitting and fixing glazed wall tiles for walls of approved dimension as directed by Engineer-in-charge in dados skirting and risers of steps on 12 mm. thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects. |
| 19 | Providing fitting, fixing of Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 3 mm thick Aluminium Composite Pannel sheet fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete. |
| 20 | Supplying, fitting and fixing M.S. iron grill of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 21 | Providing & laying granite stone flooring in Floors and landing using 20mm thick granite stone slab of approved quality, colour and size above 0.4 sqm as per IS 14223 laid over an under layer of 20mm thick cement mortar (1:4) confirming to IS 1443 including cutting to size, laying and filling the joints with cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials,labour,conveyance, royalties, loading,unloading,sundries,watering and curing, T&P,etc, |
| 22 | Wall Painting two coats with approved Distemper in Ground floor over one coat primer |
| 23 | Providing two coats weather coat paints over a coat of primer of approved make and shade in all floors and height including cost, conveyance, taxes of all materials, cost of labour, T&P etc. as required for the work complete in all respect as per direction of Engineer-in-charge. |
| 24 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of primer to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T & P required for the work etc. complete in all respect. |
| 25 | P.H. WORKS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ) |
| 26 | 20 mm CPVC SDR 11 pipes |
| 27 | 25 mm CPVC SDR 11 pipes |
| 28 | Providing all materials, labour, T&P for laying/ fixing of following dia UPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size UPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. as per specification and direction of Engineer-in-charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ). |
| 29 | 25 mm UPVC sch 80 pipes |
| 30 | 32 mm UPVC sch 80 pipes |
| 31 | Supplying all labour T & P for Cutting grooves through the wall or floor for taking PVC pipes and mending good the damages etc.all complete. |
| 32 | Wall & floor cutting |
| 33 | Supplying all labour T & P for Cutting holes through the brick or laterite, masonarry wall for taking sand cast iron (SCI) pipes or A.C pipes and manding good the damages etc.all complete. |
| 34 | For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall |
| 35 | For 75mm to 150mm dia pipe to pass in 250mm thick wall |
| 36 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge. |
| 37 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge.(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. )Rain Water Pipe . |
| 38 | 110mm U.P.V.C.S.W.R.Pipe 6kg/cm2 |
| 39 | 110mm U.P.V.C.S.W.R.Door bend |
| 40 | 110mm U.P.V.C.S.W.R.45 degree bend |
| 41 | 110mm U.P.V.C.S.W.R.plain bend |
| 42 | CP grating |
| 43 | 110mm U.P.V.C. Clip/Clamp |
| 44 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubSupplying all materials, labour, T&P and fitting and fixing U-PVC SWR Type B soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing,Excluding earthwork in excavation in all kinds of soil and refilling of trenches , Sewer ,waste water &stack line pipe from bathroom & toilet etc. as per specification and direction of Engineer-in-charge. .(Make: ASTRAL /SUPREME/ORIPLAST OR EQUIVALENT. ) |
| 45 | 50mm U.P.V.C.S.W.R.Pipe 6kg/cm2 |
| 46 | 110mm U.P.V.C.S.W.R.Pipe 6kg/cm2 |
| 47 | 110mm U.P.V.C.S.W.R. plain bend |
| 48 | 110mm U.P.V.C.S.W.R. DoorTee |
| 49 | 110mm U.P.V.C.S.W.R Plain . Tee |
| 50 | 110mm U.P.V.C.S.W.R.45 degree bend |
| 51 | 110mm U.P.V.C.S.W.R. P -trap |
| 52 | 110mm U. P.V.C. Clip/Clamp |
| 53 | 110mm U.P.V.C.S.W.R. Off set bend |
| 54 | 110mm U.P.V.C.S.W.R. cowel |
| 55 | Supplying, fitting and fixing of following types CP other fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. |
| 56 | 15mm dia C P brass 2 Way bib cock with wall flange |
| 57 | 15 mm CP brass Angular Stop Cock with wall flange |
| 58 | Auto Closing Concealed Urinal Flush Valve With Wall Flange |
| 59 | C P Bottle TRAP 32 mm size with 250mm& 190mm Long wall Connection Pipes &Wall Flange |
| 60 | 15mm dia C.P. brass Piller cock |
| 61 | Waste Coupling 32mm size Full Thread |
| 62 | Soap Dish (Polycarbonate) |
| 63 | Supplying all materials labour T & P fitting & fixing of white glazed vitreous china ware porcelainWall Hung Basin & pedestal of approved make including all jointing materials and cost, taxes, conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT |
| 64 | Wall Hung Basin Size:620x480x185mm &Half Pedestal With Fixing Accessories |
| 65 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including , fixing 100mm dia 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer-In-Charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQIVALENT |
| 66 | Orissa PanSize:440x590x250mm |
| 67 | Supplying all materials, labour, T&P and fixing Squatting urinal including connecting the urinal with sewer pipe,Flushing arangement from PVC Low levell Cistern, including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Make: JAQUAR / HINDWARE / PARRYWARE OR EQUIVALENT |
| 68 | Squatting Urinal with Fixing Accessories ,Size:450x350x100mm |
| 69 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. Make JAQUAR/HINDWARE/PARRYWARE OR EQUIVALENT. |
| 70 | 10 Liters capacity PVC cistern |
| 71 | Providing all materials, labour, T&P for fixing of Bevelled edge mirror mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. |
| 72 | Bevelled Edge Mirror (600x450mm) of 6mm thick |
| 73 | Fixing of Following size UPVC ball Valve of of approved make as per specification complete as per direction of Engineer-in-charge.( Make:ASTRAL /SUPREME/ORIPLAST or Equivalent) |
| 74 | 25 mmUPVC BALL VALVE Sch-80(Sol. Welded with Metal Ball) |
| 75 | 32 mm UPVC BALL VALVE Sch-80(Sol. Welded with Metal Ball) |
| 76 | Fixing Rotational moulded polyethylene Triple layer White cylendrical vertical water tank storage of required capacity conforming to IS : 12701--1996 including cutting holes through the tank and fixing PVC tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. make: Sintex/Astral/Ashribad or Equivalant. |
| 77 | Fixing Rotational moulded polyethylene Triple layer White cylendrical vertical water tank storage of 2000 ltr capacity |
| 78 | Supplying all materials, labour, T & P and constructing Gully trap chamber of inside size 300mmx300mmx450mm with 300mm x 300mm size SFRC cover with frame and embaded in concret ,100mm foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap over 100mm Sand filling , Fly Ash brickwork in CM (1:5) with Fly Ash bricks having crushing strength not less than75kg/cm2 in P&F,benching & chanelling in CC (1:2:4) mix using 12mm size h.g. chips and inside 12mm thick cement plastering (1:3) finished with neat cement punning, cement plastering (1:3) to outside wall surface including fixing 110mm size PVC gully trap, 150mm x150mm C.I gratig, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge |
| 79 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:4:8) mix using 40mm size h.g. metal on bed over 100mm Sand filling, Fly Ash brickwork in CM (1:5) with Fly Ash bricks having crushing strength not less than75kg/cm2 in P&F , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with Cement punning to inside , cement Plastering (1:3) to outside , R.C.C. cover slab in (1:1.5:3) using 12mm size h.g. chips with SFRC Circular(Heavy Duty)man hole cover to be fixed in the Frame made in RCC Cover Slab , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge. |
| 80 | Inside size 750mm x750mm x450mm. |
| 81 | Supplying all materials, labour, T&P and constructing MHChamber of size 1.20 mtr x 0.90 mtrx0.90mtr. depth including cost of SFRC Man Hole Cover(Heavy Duty) to be fixed in in the Frame made in RCC Cover Slab , 200mm thick cement concrete (1:4:8) in foundation using 40 mm size HG metal ,RCC cover slab in (1:1.5:3) mix using 12 mm size H.G chip moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement Plaster (1:3) to outside ,250mm Fly Ash Brick Wall in CM (1:5) &150mmthick RCC cover slab in (1:1.5:3) mix using 12 mm size H.G chips, fitting & fixing of S.F.R. poly popylene foot step iron, Earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge. |
| 82 | Inside size 1200mmx900mmx900mm |
| 83 | Providing & Constructing SEPTIC TANK of 3.5m x 2.0m X2.5m inner size including earth work in excavation, back filling,RCC Wall in C C (1:1.5;3) in all sides to make chamber, Plain Cement Concrete (1:3:6) 100mm thick in bottom of chamber with 40mmdown graded Crusher broken hard granite metal,150 mm thick RCC Foundation in C C (1:1.5:3), inside 6mm thick cement plaster 12mm thick in CM 1:4 & neat cement punning , Top slab in RCC (1:1.5:3) 125mm thick with necessary centering & shuttering, TMT steel reinforcement 10 mm dia both way, SFRC Circular manhole cover(Heavy Duty ) to be fixed in the Frame made in RCC Cover Slab , makingthe floor of chamber with necessary slope complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge. |
| 84 | Providing & Constructing SOAK PIT of 1m dia x2.50m deep size including earth work in excavation, back filling,) using 12mm size CBHG Chips to make chamber, and filling with BRICK KHOA 50mm to 100mm size up to 1.20Mtr. depth ,filling Cavity arround the pit with excavated materials complete with all materials, labour, tools, plant, royalty, curing, etc. in all respects as per the direction of Engineer-in-charge. |
| 85 | ELECTRICAL WORKSWIRINGWiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 86 | Group A |
| 87 | Subsequent point of group control |
| 88 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 89 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 5/6 A Sockets. |
| 90 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards |
| 91 | 2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for Meter Board to 16A socket/switch |
| 92 | Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required |
| 93 | 15/16A switch |
| 94 | 6pin 15/16A socket |
| 95 | Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required. |
| 96 | 2 Module |
| 97 | 4 Module |
| 98 | Supplying and fixing following way, horizontal type Single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 99 | 8 way, Double door |
| 100 | Supplying and fixing following rating, , 230 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 101 | 32A Double Pole (mcb) |
| 102 | Supplying and fixing 5A to 32A RATING ,240/415V ,10KA,\\"C\\" CURVE,MCB suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. |
| 103 | Single pole (16A) |
| 104 | Single pole (10A) |
| 105 | Supply, Installation, Testing & Commissioning of 225 mun dia Exhaust Fan as per direction of EIC of approved make equivalent to Bajaj make product code-70079 including all materials & labour etc. (Make: BAJAJ/ORIENT/Havells/CG/Usha) |
| 106 | LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) COB Type of following body material and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI>80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K/5700°K/6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 107 | 18Watt |
| 108 | LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) COB Type of following body material and construction as per IS: 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI>80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K/5700°K/6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 Im/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 109 | 18-22 Watt |
| 110 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. (PVC Batten/ Angle Holder) |
| 111 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required. |
| 112 | Charcole |
| 113 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/termination with Gl thimble etc |
| 114 | supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 115 | 4c×16 sq mm (Al.) |
| 116 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 117 | 4c×16 sq mm (Al.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender