Tender For Peripheral Development And Modernization Of Fiac, Niali
Tender Value
4.20 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
7 days left
EMD
4250
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Peripheral Development And Modernization Of Fiac, Niali
BOQ
| Sl. No. | Item Description |
| 1 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge . |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost,conveyance and royality of sand etc. complete as per direction of Engg-in-Charge . |
| 3 | Cement concrete 1:3:6 using 4cm. size HBG crusher broken metal including cost,conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 4 | Brick work with Fly Ash .Bricks having crushing strength between 100kg/sq.cm to 149kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 5 | 12mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 6 | Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge . |
| 7 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. |
| 8 | Supply, Fitting and Fixing of 7w round recessed LED light |
| 9 | Recessed submain wiring alongwith earthwire with the following sizes of pvc insulated single core multistrend copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduct 1.6mm in recessed PVC |
| 10 | 2x2.5sqmm +1x1.5sqmm |
| 11 | Wall Priming one coats on old work with wall water bound primer of approved shade as per direction of Engg-in-Charge . |
| 12 | Ground Floor(Inside) |
| 13 | First Floor(Inside) |
| 14 | Second Floor(Inside) |
| 15 | Wall painting two coats on new work with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .Data for 10.00 Sqm.. |
| 16 | Ground Floor |
| 17 | First Floor |
| 18 | Second Floor |
| 19 | Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge . |
| 20 | Fixing Wash down water closet, (European type W.C Pan) with integral S or P trap confirming to IS 2556: Part 8 -2004 to the floor with soil pipe in cement mortar (1:1) etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. |
| 21 | Fixing water closet ,squatting pan (Indian type W.C Pan) confirming to IS 2556: Part 3 -2004 duly embeded in cement concrete 1:4:8 using hard granite metal 4cm nominal size all complete as per specification. |
| 22 | Providing & fixing 10ltr capacity PVC low level flushing cistern with a pair of PVC brackets complete |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 24 | Provision of Signage (made up of SS of size 10\\" height) |
| 25 | Supply, Fitting and Fixing of 32mm thick Flush Door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both sides of approved design and quality including cost of all door fittings and fixtures. |
| 26 | Providing fitting and fixing of office cupboard made up 19mm thick BWR grade plywood and finished with 1mm thick BWR grade decorative laminates of approved shade over wooden frame fixed with rawl plug including drilling hole and fixing by synthetic adhesive ,headless pin with all accessories complete as per direction of engineer in charge |
| 27 | Supplying fitting and fixing of 1.5 Ton 3 star inverter Air Conditioner of make(Voltas,Bluestar, Samsung, Hitachi,Lyloid) |
| 28 | Supplying fitting and fixing of stabilizer of 5 KVA for 1.5Ton 3 star Air Conditioner of make(V-guard,Luminos) i Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender