Tender For Repair Of Internal Electrical And Ph Works Of Fiac, Badamba
Tender Value
1.59 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
7 days left
EMD
1600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Internal Electrical And Ph Works Of Fiac, Badamba
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 2 | Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge . |
| 3 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 4 | Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .Data for 10 Sqm.. |
| 5 | Wall painting two coats on new work with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .Data for 10.00 Sqm.. |
| 6 | Providing & fixing false ceiling of Alm anodised T section no 3215 with 2'-0\\" center to centre,L section no 1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Alm grid 2'-0\\"x2'-0\\" with 17.5mm thick gypsum Board |
| 7 | S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 15/16amp plug and switch Modular on metal box and Modular cover with all connections( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent) |
| 8 | S/F of 56\\"Celling Fan with (Make Havelss/Phillips/Bajaj/PAC/Crompton) |
| 9 | Supply of plastic moulded chairs (Supreme, Nilkamal, other reputed brands) |
| 10 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. |
| 11 | 20 mm CPVC (sdr-13.5) pipes (Oriplast/Supreme) |
| 12 | 25 mm CPVC(sdr-13.5) pipes (Oriplast/Supreme) |
| 13 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 14 | First Floor |
| 15 | Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock |
| 16 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange |
| 17 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock |
| 18 | Fixing of 25mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge.32mm dia brass or gun metal full way valve |
| 19 | 15mm dia PVC connection pipe 450 mm long |
| 20 | 15mm dia CP Extention Nipple |
| 21 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge. |
| 22 | Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge. |
| 23 | 15mm dia CP Health Faucet of Jaquar 1.01mtr long, |
| 24 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. |
| 25 | 110mm diameter U-PVC SWR pipes |
| 26 | 110mm U-PVC door Tee |
| 27 | 110mm U-PVC offset |
| 28 | 110mm U-PVC door bend |
| 29 | 110mm U-PVC plain shoe bend |
| 30 | 110mm U-PVC vent cowl |
| 31 | 110mm P-trap |
| 32 | 110mm U-PVC plain bend |
| 33 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/Jaquar/Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. |
| 34 | 10 Liters capacity PVC cistern with 32mm dia flush bend. |
| 35 | Fixing Wash down water closet, (European type W.C Pan) with integral S or P trap confirming to IS 2556: Part 8 -2004 to the floor with soil pipe in cement mortar (1:1) etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. |
| 36 | Fixing wash basin with hole for Pillar taps confirming to IS 2556 : Part 4 -2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. (550x400) |
| 37 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes andfittings |
| 38 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. |
| 39 | B.E.mirror |
| 40 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24\\" of Hindware/Jaquar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge |
| 41 | 25mmx600mm long CP towel rail |
| 42 | Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case of Hindware/Jaquar/Parryware complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge |
| 43 | CP soap holder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender