Tender For Internal Electrification Of The Newly Constructed Boys Hostel At Ugtc, Lembucherra Under West Tripura District.
Tender Value
15.89 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
5 days left
EMD
31788
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Electrification Of The Newly Constructed Boys Hostel At Ugtc, Lembucherra Under West Tripura District.
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work : |
| 2 | Wiring for light & fan point with 2 X 1.5 sq. mm. PVC insulated copper conductor cable (FR) in PVC casing and capping complete with PVC surface modular switch board with cover plate and 10A. modular switch including connection etc. as required Short Point :- |
| 3 | Medium point:- |
| 4 | Long point:- |
| 5 | Providing and Fixing of 3 Pin 10 Amps Plug Point with Modular Type 6/10 Amps Switch and Socket including Connection with 2x1.5 sq.mm PVC insulated Copper Conductor Cable [FR] on Surface Modular Switch Board, Earthing the 3rd Pin etc. as required. |
| 6 | Providing and Fixing of 3/6 Pin 16/20 Amps Plug Point with Modular Type 16/20 Amps Switch and Socket including Connection with 2x2.5 sq.mm PVC insulated Copper Conductor Cable [FR] on Surface Modular Switch Board, Earthing the 3rd Pin etc. as required. |
| 7 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:- a) 2 X 1.5 sqmm |
| 8 | 2 X 2.5 sqmm |
| 9 | 4 x 4.0sqmm |
| 10 | 4 X 6 sq mm |
| 11 | 4 X 10 sq mm |
| 12 | 4 X 16 sq mm |
| 13 | 3 X 1.5 sq mm |
| 14 | Wiring for Circuit / Sub-Main with following sizes PVC Insulated Copper Conductor Cable (FR) in existing PVC Casing Capping in recess/surface including connection etc. as required. 1x2.5 Sqmm |
| 15 | Supplying and Fixing of the following PVC Conduit (Medium Gauge) with all accessories etc. as required 19/20mm dia |
| 16 | Supplying & Fixing of the following sizes Wooden Switch Boards with 3mm thick bakelite cover etc. as required. 203 mm X 300 mm (8\\" x 12\\") |
| 17 | 254 mm X 300 mm (10\\" x 12\\") |
| 18 | Supplying and Fixing of the following Electrical Accessories including necessary connection etc. as required. 6/10 Amps One Way SP Switch (1M) |
| 19 | 16/20 Amps 1-Way DP Switch (2 M) |
| 20 | 5-Step Fan Regulator (2 M) |
| 21 | 20/25A Single Phase Motor Starter Switch(2M) |
| 22 | Earthing with Copper Earth Plate 600 mm x 600 mm x 3mm thick including accessories and providing masonry enclosure with CI Cover Plate Size 12\\"x12\\" having Locking Arrangement, along with 20mm dia (Medium Gauge) watering pipe including CC Work as required. |
| 23 | Extra for using Salt (12 Kg) and Charcoal (96 Kg) for Earth Plate Electrode as required. |
| 24 | Providing and Fixing / Drawing 4.06mm dia (8 SWG) Copper wire on Surface or in existing G.I / PVC / Polythene Pipe for Loop Earthing as required |
| 25 | Supplying & Fixing of 1200 mm Sweep White Colour AC Ceiling Fan Capacitor Type Double Ball Bearing Complete with 300 mm Down Rod, Canopies, Shackles, 3 nos Blades including wiring the Down Rod with 2x1.5 Sqmm PVC Insulated Copper Conductor Cable (FR) (ISI Marked, BEE 1-Star / Minimum Service Value 4.0 m3/min/W) |
| 26 | Supplying & Installation of 400 mm Sweep AC Wall Mounting Fan with Plastic Blade including Connection etc. as required |
| 27 | Supplying & Installation of 300 mm Sweep Metallic Body Exhaust Fan including Connection etc. as required |
| 28 | upplying & Fixing of following OutDoor LED Luminiaries in Powder Coated die cast housing complete with high efficiency polycarbonate diffuser with Heat Resistant Tempered Glass / Diffuser including necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm / watt). 90 Watt LED Street Light fixture with Integral Driver and Secondary Lens (IP 66) |
| 29 | 120 Watt LED Street Light fixture with Integral Driver and Secondary Lens (IP 66) |
| 30 | Supplying & Fixing of following LED Tubes, Retrofit Bulbs / Lamps for LED Luminaries including necessary connection etc. as required 10/20 Watt LED Tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100 lm/watt) |
| 31 | 9 Watt LED Retrofit Lamp with Polycarbonate Body and Aluminium Heatsink |
| 32 | Supplying & Fixing of following OutDoor LED Luminiaries in Powder Coated die cast housing complete with high efficiency polycarbonate diffuser with Heat Resistant Tempered Glass / Diffuser including necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm / watt). Recessed / Surface Mounted 2ft x 2ft decorative 36 Watt LED Panel Light with integral driver and high quality with integral driver and high quality polycarbonate diffuser |
| 33 | Recessed Round / Square Shaped 18 Watt LED Downlight with integral driver and high quality polycarbonate diffuser |
| 34 | Supplying & Installation of following Bus Bar Chamber of the following ratings and sizes made of Steel Sheet enclosure with all accessories including necessary connection etc. 100 Amps 415 Volts 4-Strip Copper BusBar Chamber 6 Ways of Size (610mm X 410mm X 120mm) |
| 35 | 200 Amps 415 Volts 4-Strip Copper BusBar Chamber 6 Ways of Size (610mm X 410mm X 120mm) |
| 36 | Supplying & Installation of Switch Dis-Connector Fuse Unit (Main Switch) of the following ratings with all accessories including necessary connection etc. as required. 100 A 415 Volts TPN Main Switch (Rewireable) |
| 37 | 200 A 415 Volts TPN Main Switch (Rewireable) |
| 38 | 200A Kitkat Porcelain Fuse Unit (Rewireable) |
| 39 | Supplying & Installation of Powder Coated Steel Sheet Enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB/(SP/SPN/DP/TP/TPN/FP) complete with necessary Bus Bar, Neutral Link, Din Rail, Earth Bar etc including necessary connection as required. 12 Way SPN MCB DB (Double Door) |
| 40 | 6 Way SPN MCB DB (Double Door) |
| 41 | 12 Way Vertical TPN MCB DB suitable for FP MCB incommer (Double Door) |
| 42 | Supplying & Installation of Powder Coated Steel Sheet Enclosure suitable for 415 volts MCCB (TP/FP) complete necessary connection as required. Enclosure suitable for MCCB above 100 amps upto 200 amps |
| 43 | Supplying & Installation of 10 KA breaking capacity, B/C Curve MCB of following ratings in the existing MCB DB including connection as required 6-32 Amps SP MCB |
| 44 | 6-32 Amps DP MCB |
| 45 | Supplying & Installation of Isolators of following ratings in the existing MCB DB including connection etc. as required 100 Amps TP Isolator |
| 46 | Almunium Conductor Armoured Cable with necessary connection etc as required 3.5 Core 35 Sqmm |
| 47 | Supplying and Fixing of M.S. Frame made of 25x25x5 mm M.S Angle with necessary support by 40x6 mm M.S Flat and 12 mm thick boiled plywood on top, grouted on wall with 4 nos leg with 25x25x5 mm. M.S angle with 20 cm. long finished with red oxide and 2 coat synthetic enamel paint including necessary C.C Work, mending the damages and painting etc. as required. |
| 48 | Providing and Commissioning 2 Kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure type, Pressure Gauge, Gross Weight 3.6 Kg, Empty Weight 1.6 Kg, Can height 344mm, Diameter 108mm, Discharge Time less than 8 Sec. Controllable Meter, Applicable on Class A,B,C and electrically Started Fire, A Rating 1A, B Rating 88, can construction : Deep Drawn & Co. Mig welded, Valve Construction : Forging and Mechining, Internal Coating of Can: Epoxy Powder Coating, External Coating of Can, Epoxy Polyster Power Coating, Sheet Metal Thickness: 1.60mm, 5 Years Warranty with instalert system with superior quality EPDM Rubber Hosepipe etc. as required |
| 49 | Supplying & Fixing of Copper Terminal Ends (LUGS) of following sizes 4 Sq.mm |
| 50 | 6 Sq.mm |
| 51 | 10 Sq.mm |
| 52 | 16 Sq.mm |
| 53 | 35 Sq.mm |
| 54 | Supplying & Installation, Testing and Commissioning of following ratings Inverter with Square / Sine wave technology, noiseless operation, Inbuilt advance PCB Programming, Microprocessor with all accessories including necessary connection etc. 1500VA, 24V DC, 1Ph Input/Output (Sine Wave) |
| 55 | 12V/150AH Tall Tubular Battery Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender