Tender For Regarding Maintenance / Renovation Work At Naldehra Golf Course. (Sh:- Repair & Maintanance Works Of Dr. Ys Parmar Pavallion And Naldehra Golf Course.) (Excluding Gst)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Regarding Maintenance / Renovation Work At Naldehra Golf Course. (Sh:- Repair & Maintanance Works Of Dr. Ys Parmar Pavallion And Naldehra Golf Course.) (Excluding Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of prescribed charges of dumping to the owner of dumping site as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. (Excluding GST) |
| 2 | In Posts. (Excluding GST) |
| 3 | Dry stone pitching 22.5 cm thick laid in courses and required profling with hammer dressed stone has no side less then 15 cm with minimum depth of 20 cm including preparing the bed surface etc all complete ( Payment of stone to made seprately) including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 4 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site, including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 5 | Providing and Fixing 1st quality white / coloured glazed / cermic wall tiles 30x45 cm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 6 | Providing and Fixing double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12 mm thick cement mortar 1:3 (One cement : Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 7 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm(three hundred into three hundred milimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 8 | Providing and Laying wooden plank of 35 mm thick in flooring threads of steps laid onbed of detail of cost for one Sq.m. The rate is inclusive of carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 9 | Steel work welded in built up tubilar (round , square or rectangular hollow tubes etc) trussess etc. Including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 10 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work. (Excluding GST) |
| 11 | Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 and 1203 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) Cement Mortar 1:1:5:3(One cement:One point Five sand:Three graded stone aggregate 20mm(Twenty milimetre) nominal size).(Excluding GST) |
| 12 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802,803,1202 & 1203 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Nominal mix 1:3:6 (one cement : three sand:six graded stone agg. 20mm (twenty milimeter). (Excluding GST) |
| 13 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802,803,1202 & 1203 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Nominal mix 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20 mm nominal size) (Excluding GST) |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:6 (One cement : six coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (Excluding GST) |
| 15 | Half Brick masonary work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(Excluding GST) |
| 16 | Providing woodwork in frame of doors windows , clerestory , windows and other frames wrought framed and fixed in position , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2nd class pine wood (Excluding GST) |
| 17 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. (Excluding GST) |
| 18 | Providing and fixing 12 mm thick improted pine wood ceiling/ panelling with topunged and grooved jointing of standard quailty ISI marked and approved shade and colour complete , including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST) |
| 19 | 15 mm cement plaster in single coat on the rough side brick/concrete/stone walls for interior plastering upto floor two level including arries , internal rounded angles, chamfers and /or roundedanges not exceeding 80 mm in girth and finished even and smooth (iv) Cement Mortar 1:6 ( 1 cement : 6 fine sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 20 | 6mm Cement plaster to ceiling in cement Mortar 1:3 ( Cement : 3 sand) , including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 21 | 15 mm cement plaster in single coat on the fair side brick/concrete/stone walls for interior plastering upto floor two level including arries , internal rounded angles, chamfers and /or roundedanges not exceeding 80 mm in girth and finished even and smooth (iv) Cement Mortar 1:6 ( 1 cement : 6 fine sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 22 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 23 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of materials in all leads as per directions of the Engineer-in-Charge.(Excluding GST) |
| 24 | Wall/Celling with acrylic emulsion paint of approved brand and manufacture to give an even shade ,including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) Two or more coats on new work. |
| 25 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 26 | Providing and fixing P.V.C Connection pipe with Brass Union fixed to, including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 45 mm nominal bore (Excluding GST) |
| 27 | Providing and fixing Brass angle volve with nuts and pipe, including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore (Excluding GST) |
| 28 | Providing and fixing vitreous China bowl pattern urinal sensor but W/O sensor kit Jaquar sware (white -urinal 740x300mm - 29.6 inch x 12 inch including connection the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for separately) complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 29 | Providing and fixing Division plate for Urinals, including carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 30 | Providing and fixing vitreous China wash down chrome 6D one piece Jaquar Kubix single piece EWC S-300 water closet with integral P or S trap including jointing the trap with soil pipe in cement 1:1 (seat and cover to be measured and paid for separately)complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 31 | Providing and fixing 15mm Jaquar table mounted ragular sensor basin mixture opal primer SNR 15019 MPK-stain steel-DC & make as per approved by ,including carriage of materials in all leads as per directions of the Engineer-in-Charge. 15 mm nominal bore with top/ bottom swinging spout (Excluding GST) |
| 32 | Providing and fixing vitreous China wash basin with single hole for pillar tap Jaguar full Pedestial rectangle shape white basin area Queen primer QPS WHT 7803 PM whole baisn fixing with accessories with C.I or MS brackets painted with including cutting holes and making good the same but excluding fitting, complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 33 | Providing and fixing C.P brass waste pipe for wash basin & sink including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 32 mm dia (Excluding GST) |
| 34 | Providing and fixing PVC connection pipe with brass unions including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 35 | Providing and fixing 600mm x 120mmx 5mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore MAKE ESSCO or Equivalent (Excluding GST) |
| 37 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150 mm dia. (Excluding GST) |
| 38 | (ii) 110 mm dia. (Excluding GST) |
| 39 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110mm x 90mm (one hundred ten milimetre into ninety millimetre) nominal size. (Excluding GST) |
| 40 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150 mm dia. (Excluding GST) |
| 41 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 110 mm dia. (Excluding GST) |
| 42 | Providing and fixing 8mm dia C.P Health sofit with flexible tubo upto 1 m long with SS triangular plate to Euraopian type W.C of quality and make, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 43 | Providing and fixing brass towel rail (heavy dury ISI marked IS: 8931) complete with C.P brass brackets fixed to wooden plugs with C.P brass screw,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600x20mm (Excluding GST) |
| 44 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing over steel trusses prepainted galvanished steel with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (Excluding GST) TATA Durashine. (Excluding GST) |
| 45 | Painted steel work with Deluxe Multi Sarface paint to give an even shade , Two or more coat applied @0.90 ltr/10 sqm an under coat of primer applied @ 0.08 ltr/10 sqm of approved brands and manufacture ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 46 | Polishing on wood work with ready mixed liker polish of approved brands and manufacture,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 47 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) TATA Durashine (Excluding GST) |
| 48 | Stone for the wall lining upto 10 mtrs hight with special adhersive over 12 mm thick bed of cement mortar 1:3, including pointing in white cement with an mixture of pigiment to match the stone shade , Granite stone of any colour and shade ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(Excluding GST) |
| 49 | Providing and fixing valley 90 cm overall with 0.45mm(zero point four five milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. MAKE TATA Dura Shine (Excluding GST) |
| 50 | Stone work in plain ashlar in supre structure uotp floor level in cement mortar 1:6 including pointing with cement mortar 1:2 with an admixture of pigment matching with stone dust , both side white sand stone ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 51 | Providing and fixing UPVC casement series profile specifications CMT outer frame (60mmx58mm) , outer RI :RI 27 mm x 1.2 mm , mullion: CMT T mullion (60 mm x 72mm) CFTM60-GT , mullion RI :RI 27 mm x 18 mm (RF CFT M60 GT-1.2 mm ) i/c Zinc alloy casement handle , Fciction stay / 2D hinges / Butt hinges , espag multipoint locking system ,locking stickers , locking stickers i/c including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 52 | Providing and fixing 19mm thick commercial board water proof in shelves, lining , box for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 53 | Providing and fixing 19mm thick commercial board water proof in shutter, lining , box for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 54 | Providing and fixing 1.00 mm thick sunmica laminated of approved shade fixed with adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 55 | Providing and fixing bright finished brass door latch with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 300mm x 16 mm (Excluding GST) |
| 56 | (i) 250mm x 16 mm (Excluding GST) |
| 57 | Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 250mm x 10 mm (Excluding GST) |
| 58 | (i) 150 mm x 10 mm (Excluding GST) |
| 59 | Providing and fixing Anodized Almunium handle transparent or ded to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 (Excluding GST) |
| 60 | (i) 100 mm (Excluding GST) |
| 61 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails ( frame work and cover fillets to be measured and paid for separately , including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST) |
| 62 | Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood lipping. (Excluding GST) |
| 63 | Providing and fixing wall face PVC 150 mm dia rain water pipes of working pressure not less then 5.5 kg /sq including filling the joints with approved adhesive etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 64 | Providing and laying Granite stone in flooring 20 mm (average) thickness base of cement mortar 1:3 (1 cement :3 sand ) laid over and jointed with grey cement slurry mixed with with pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick. (Excluding GST) |
| 65 | Providing edge moulding to 20mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge (i) Marble work. (Excluding GST) |
| 66 | Providing and Laying wooden plank of 20 mm thick in flooring threads of steps laid on a bed of detail of cost for one Sq.m. The rate is inclusive of carriage of materials in all leads as per directions of the Engineer-in-Charge. (Excluding GST) |
| 67 | Providing and fixing powderd coated Telescopic channel 300 mm long ,etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 68 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 69 | Painting wood surface with MRF waterproof paint etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) |
| 70 | Providing and fixing toughen glass of 12 mm thickness in door , windows etc with all fiting ,etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender