Tender For Augmentation Of E&M Equipment At Various Tube Wells In Delhi Gate Ward No-77 In Matia Mahal Constituency In Ac-21
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2026
5 days left
EMD
15700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of E&M Equipment At Various Tube Wells In Delhi Gate Ward No-77 In Matia Mahal Constituency In Ac-21
BOQ
| Sl. No. | Item Description |
| 1 | Supplyof Automation LT Panel board suitable for 415 V, 3 Phase, 50 Hz, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 ,, for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX1360 mmX300 mm and having (1) 63 Amp changeover -1 No (2) 63 A TPN MCB -1No (3) Amp. meter 0-50 A -1 No (4) Voltmeter 1 No (5) Amp. & Volt meter selector switches 1 set (6) Auto Manual + Light+ Control MCB TP 32 Amp-1 No. each (7) CT--3 Nos (8) Push button +ON/OFF light-2 Nos each (9) 5 KVAR Shunt Capacitor-1 No (10) Aluminium Bus bar size 25 mmX6mm- 1set (11) 15 HP Star Delta starter (a) 32 Amp Power Contactor-3 Nos (b) overload relay 14-23 A-1 No (C) Star Delta Timer -1 No (d) QT Timer -24 Hours -1 No (e) Motor Protection Relay flush mounting with display with thermal O/L, Short circuit, earth Fault, Phase loss, unbalance, Phase reversal, locked rotor protection Make :- L&T/Protech-1 No Make of Accessories/components as per DJB approved Make of Panels:- L&T/C&S/BCH/Protech/DJB Approved |
| 2 | Supply-Of G.I. Pipe 50mm dia, Medium-class, each of 3m±3'' Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. |
| 3 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make:Gloster/Universal/Havells/ |
| 4 | Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal / TATA. |
| 5 | Supply-Of G.I. Bend 90o x 50 mm dia, having Flange at both-ends. |
| 6 | Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality. |
| 7 | Supply-Of Rubber-packing for 50mm dia Flange. |
| 8 | Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. |
| 9 | Lowering & lifting of sub/sets from bore by taking out double flanged GI pipes, submersible P/Set, Cable, cutting of rusted nuts and bolts etc and replacement of damaged D/F GI pipes, cable, defective pump set etc as per site requirement and lowering of sub P/set, sub cable, GI Pipe etc as required, jointing of cable from sub P/Set along with holding of cable with pipes and The Job includes hardware items such as nut bolts rubber Packing and other misc. items required for Jointing etc. as per site requirement, complete tools and tackles as per site requirements and Safety gadget such as portable emergency search light, Safety Helmets , electric shock Proof Hand Gloves Gum boots, caution Tape and barrier cone etc. as per site requirement and testing and commission Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender