Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #57879242

Tender For Repair To Compound Wall, Fencing, Drain, Paths, Culverts Etc In Otm Accn Under Age B/R Ii At Chandimandir Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Panchkula, Haryana
Tender Value
49 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair To Compound Wall, Fencing, Drain, Paths, Culverts Etc In Otm Accn Under Age B/R Ii At Chandimandir Mil Stn

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Oct-2026 Revised date Date 02-Nov-2026

BOQ

Name of Work:- REPAIR TO COMPOUND WALL, FENCING, DRAIN, PATHS, CULVERTS ETC IN OTM ACCN UNDER AGE B/R II AT CHANDIMANDIR MIL STN
Sl. No. Item Description
1Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed gound complete all as specified and directed
2Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
3Dismantling fencing wire mesh of any type complete all as specified and directed
4Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed.
5Demolition of brickwork built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed
6Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed
7Demolition of reinforced cement concrete such as roofs, floors, beams, staircase, landing, chajja, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
8Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified.
9Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material complete all as specified and directed.
10Demolition and breaking up drain pipes (Salt, glazed ware, AC or reingforced conceret) of 300/450mm dia, set in cement mortar.
11Site clearance in soft /loose soil inclusding cutting of bushes & small shrubs etc. complete all as specified and directed.
12Excavation in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out and removing surplus soil to a distance n exc 50 m and making good all as specified.
13Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
14Mild steel round bars 10mm dia and over cut to length, as fixed in chain link fencing along the length as required complete all as specified and directed.
15Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
16Mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.
17Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
18Framed work such as Gates, grills, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, complete all as specified & directed by Engineer-in-charge.
19Refixing only mild steel frame work as in gates including pintol hinges, stops, hand made sliding bold etc of ornamental and intricate design after necessary welding complete all as specified and directed
20Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.
21Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
22Rendering 15mm thick in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete, all as specified and directed.
23Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
24Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 but except bricks, complete all as specified & directed.
25Cement concrete type B1, 1:2:4 (20mm graded aggregate) as in coping, benching complete all as specified.
26Preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
27Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer on plastered surfaces of wall complete all as specified and directed.
28Desilting the drains, removal of mud, removing the grass, vegetation, shrubs etc from drain and removing the excavated soil to a distance n.exc 50 meter and dispositing where difrected at level not exceeding 1.5 meter above the starting point complete all as specified and directed.
29Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channel and drain complete all as specified and directed.
30Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 t complete all as specified & directed.
312mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with coach screws as in roof, wall etc, fixed as in repair complete all as specified and directed.
32Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including making good the grooved area with cement mortar complete all as specified and directed.
33Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incldding taking down existing barbed wire of any description and removal of the same from site complete all as specified and directed.
34Precast cement concrete louvres and jallies, type B-0, 1:2:4, using 12.5 mm graded stone aggregate, 40 mm thick (measured solid), set in cement mortar 1:6 including all mouldings but excluding frame including dismantling of old jalli complete all as specified and directed.
35Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tiles complete all as specified.
36Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment over and including 50 mm thick sand coushining complete all as specified.
37Factory made coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
38Coloured non skid porcelain endura tiles exterior grade 300x300x10mm thick heavy duty as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, complete all as specified and directed.
39Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
4016-18mm thick Granite work (of any type table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compelte all as specified and directed.
41Pre cast factory made RCC perforated drain covers of size 750mmx750mmx75mm thick for normal duty, using 20 mm graded crushed stone agg type B_1 (1:2:4) including rcc ring/frame, reinforcement set in cement mortar and MS frame as in drain covers set in cement mortar 1:4, fixed as in repair complete all as specified and directed.
42Pre cast factory made RCC perforated drain covers of size 600mmx900mmx75mm thick for normal duty, using 20 mm graded crushed stone agg type B_1 (1:2:4) including rcc ring/frame, reinforcement set in cement mortar and MS frame as in drain covers set in cement mortar 1:4, fixed as in repair complete all as specified and directed.
43Pre cast factory made RCC perforated drain covers of size 600mmx1200mmx100mm thick for normal duty, using 20 mm graded crushed stone agg type B_1 (1:2:4) including rcc ring/frame, reinforcement set in cement mortar and MS frame as in drain covers set in cement mortar 1:4, fixed as in repair complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57879242
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 02-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair To Compound Wall, Fencing, Drain, Paths, Culverts Etc In Otm Accn Under Age B/R Ii At Chandimandir Mil Stn
Basic Detail
Tender No GE/CHM-97/2026-2027
Bidding Type Tender
Location
City Panchkula
State Haryana
Key Dates
Publish Date 17 Oct 2026
Submission Date 02 Nov 2026
Open Date 04 Nov 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
29f140c7-3554-4517-9227-204e4eb6c554.html
BOQ_888568.xls
Tendernotice_1.pdf
Tenderpages97_C.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 02, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 6 days
Nov 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

29f140c7-3554-4517-9227-204e4eb6c554.html

xls

BOQ_888568.xls

pdf

Tendernotice_1.pdf

pdf

Tenderpages97_C.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender