Tender For Addition Alteration To Certain Smqs At 503 Su

Sharing tender

Tender For Addition Alteration To Certain Smqs At 503 Su- 1 Demolition Of Concrete In Ground Floors And Pavings N.Exc 15 Cm Thickness (Below Or Above Ground Level), Cement Concrete ( Un Reinforced), Etc Complete All As Spd And Directed. 2 Taking Down Cement Or Cement Lime Plaster, Any Description On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc Completed All As Specified. 3 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Etc Completed All As Specified. 4 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors , Aprons Etc , Laid Bedded And Pointed In Any Mortar , Et Complete All As Spd And Directed 5 Demolition Of Brickwork Built In Cement Mortar Including All Quoins, Arches, Pillars Etc Complete All As Directed By Eic. 6 Demolition Of Reinforced Cement Concrete As In Chimney, Roofs, Floors (Other Than Ground Floors), Beams Staircases, Landing, Chajjas, And Similar Suspended Work Complete. 7 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each Complete All As Specified And As Directed By The Engineer-In-Charge 8 Taking Down, Chowkhats Or Frames Exc 1.5 Sq. M But N Exc 4 Sq. M Each But With Shutters (Without Taking Off Shutters From The Frame),Etc Complete All As Spd And Directed. 9 M&L Roughning Surfaces Of Old Concrete Floor By Picking ,Sweeping Clean And Washing Down With Water To Remove Dust Etc Including Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm 10 M & L For 25Mm Thick Pcc 1:2:4 Type Bo (Using 12.5Mm Graded Stone Aggregate) As In Sub Base Floor Complete All As Specified And Directed. 11 M & L First Quality Coloured Glazed Ceramic, Joint Free Tiles Fixed In Pattern Of Different Colour Including Border Of Size Aera Exc 0.15 Sqm But N.Exc 0.20 Sqm & 7-8 Mm Thick As In Vertical Surfaces Such As Dado/Skirting, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match With Colour Of Tiles Laid On And Including 10 Mm Thick Rendering In Cement Mortar (1:3), Including Pointing In White Cement With Pigment To Match The Shade Of Tiles, Complete All As Specified And Directed. Note :- Pattern Of The Tiles Will Be Decided By Ge At The Time Of Execution. 12 M&L Coloured Non - Skid Ceramic Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 15 Mm Thick Screed Bed Or Bedding Layer Of Mortar For Laying Floor Finishes In Cm 1:6 13 M&L 7 Mm To 8 Mm Thick Joint Less Light Ceramic Tiles Ditto But In Dado/Skirting Including Rendering 10Mm Thick In Cm 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces As Backing Coat. & Including Taking Down Plaster & 10 Mm Thick Cement Rendering In Cm 1: 4 Complete All As Specified And Directed By Engineer-In-Charge. 14 M&L, Non-Skid Ceramic Coloured Tiles, Joint Free Tiles 7 To 8 Mm Thick (Square/Rectangular) Of Area Exc 0.06 Sqm But N.Exc 0.11 Sqm , In Floors Etc. Set & Jointed In Neat Cement Slurry & Pointed In White Or Coloured Cement Over 15Mm Thick Screed Bed In Cm (1:6) Complete All As Specified. 15 M&L 18-20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including 20Mm Thick Screed Bed In Cm (1:6) For Laying Of Granite Slab& Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including Half Moulding Of Granite Edges Complete All As Specified And Directed. 16 M&L For 75Mm Thick Cement Concrete1:3:6 Type C1 Using 20Mm Graded Stone Aggregate As In Plinth Protection Joint Filled With Bitumen Sand Mixer 50Mm Thick Finished Even And Smooth Without Using Extra Cement. 17 M & L For Rendering 15 Mm Thick On Other Than Fair Faces Of Brick Wall Finished Fair & Even In Cm 1:6 Complete All As Specified And Directed. 18 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Wall With Mixing Wpc @ 3% By Wt Of Cement Finished Fair & Even In Cm 1:4 Complete All As Specified And Directed. 19 M & L For Rendering 10 Mm Thick On Brick Or Concrete Surface Of Ceiling Finished Fair & Even In Cm 1:3 Complete All As Specified And Directed. 20 M&L For Preparation Of Newly Plastered Or Unplastered/Undecorated Surface Of Ceiling And Applying Two Or More Coat Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per ManufacturerS Specification Complete All As Specified. 21 M & L Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coats Of Obd Over A Coat Of Putty Filling Including Preparation Of Surfaces On Walls As Specified And Directed . 22 M&L For Preparation(Complete Removal Of Existing Treatment) Of Old Decorated External Wall/Ceiling Surface Of Existing Treatment By Scrapping With Trucare Wall Sander : L-01/H-01 (Having Mechanical Vaccum Mechanism) Having Rpm Not Less Than 1500, Sand Pad Of 80 Grit Having Dia Of 7\/9\ To Make The Surface Free From Dust, Loose Paint Etc Or Equivalent Makes Viz Xpress Sanding Machine Having Suction Vaccum Bag Or By Manual Scrapping Tools Where Mechanical Removal Is Not Possible And Applying Two Coats Of Wheather Proofing Exterior Acrylic Emulsion Paint Over Priming Coat Premium Quality On Wall/Ceiling Surface Including Applying 2Mm Thick Wall Care Putty Over Disturbed Surface During Preparation Of Any Reason, Sand Papering Thus Make Surface Smooth Upto 4Th Storey Buildings Complete All As Specified And Directed. Note : (A) Stage For Preparation Of Surfaces Shall Be Got Approved From Engg-In-Charge Before Applying The Finishes.(B) Material Shall Be Procured From Manufacturer And Work Shall Be Got Executed Through Authorised Applicator. 23 M&L Preparing Of New Surface Of Wall And Applying Two Coats Of Exterior Emulsion Paint Over A Coat Primer On Walls Complete All As Specified And Directed By Engineer-In-Charge. Complete All As Specified And As Directed By Engineer-In-Charge . 24 M&L For Preparation Of Plastered Or Unplastered Old Decorated Surfaces By Complete Removal Of Existing Treatment By Mechanised Sander Of Berger Paints Or Equivalent Makes Viz Xpress Sanding Machine Having Suction Vaccum Bag Or By Manual Scrapping Tools Where Mechanical Removal Is Not Possible And Filling Of Holes And Cracks With With Suitable Material Like Cement Or Plaster Of Paris Etc And Thereafter Applying Two Coat Of Oil Bound Distemper On Walls. Note : (A) Stage For Preparation Of Surfaces Shall Be Got Approved From Engg-In-Charge Before Applying The Finishes.(B) Material Shall Be Procured From Manufacturer And Work Shall Be Got Executed Through Authorised Applicator. 25 All As Per Item No.24 Here-In-Before But On Surfaces Of Ceiling. 26 M&L Preparing Of Old Surface Of Wall And Applying Two Coats Of White Wash Including Preparation Of Surfaces. 27 M&L For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:6 28 Taking Up Or Down Steel Tubing & Connections Incl Cleaning For Refixing Or Removal From Site 15Mm Bore Pipe.Complete All As Specified And Directed. 29 Taking Down 20 Mm Dia Gi Steel Tubing And Connection, Including Cleaning For Refixing Or Removal, Completed All As Specified And Directed. 30 S&F Gi Tubes Medium Grade With All Fitting And Fixed Complete To Walls, Ceilings Or Laid In Floors 15Mm Bore Complete All As Specified And Directed. 31 M & L Tubes 20 Mm Bore Dia, Medium Grade, Galvanised, With All Fitting And Fixed Complete To Walls And Ceilings Or Laid In Floos, Complete All As Specified And Directed. 32 S&F Grating Doom 100Mm Dia Size With Ptmt Complete All As Specified And Directed. 33 Cutting Chases Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar (1:3) For Concealed Water Tubing In Brick Walls Cutting N.Exc 10 Cm Girth. Complete All As Specified And Directed. 34 M&L For Rcc 1:2:4 Type B0 (Using 12.5 Mm Graded Stone Aggregate)As In Chajjas / Cooking Shelves/ Tank Staging Platform Etc. And The Like Including 5Mm Thick Rendering In Cm 1:3 Finished Even And Smooth Without Using Extra Cement To The Surface In Contact With Form Surface Complete All As Specified And As Directed By Engineer-In-Charge(The Rate Quoted By The Contractor Shall Included Forform Work.) 35 S & F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Reqd, Incl Cranking, Bending Spirally For Hooping For Columns, Hooling Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips. 36 S&F In Repairs Wc Squatting Pan “Orissa Pattern” Of Size 580 X 440Mm White With Integral Foot Rest (Excluding Flushing Cistern & Flush Pipe) Including Connection To Trap And To Flush Pipes Etc And Cement Concrete Bedding Complete All As Specified In Ssr And Including S&F Trap Set Complete All As Specified And Directed. 37 M & L Vitreous China Wash Down Water Closet Pan, Pedestal Pattern (Ewc) White, Including Seat Cover , Fixing Bolts Connection To Trap & To Flush Pipe Fixed In Repairs Complete All As Directed By The Engineer-In-Charge. 38 S&F In Repairs Pvc Flushing Cistern 10 Ltr Capacity Valve Less Syphonic Action Type Low Level With And Incl Ball Valve Float & Handle, Waste Pipe & Brackets Complete Set Complete All As Specified And Directed. 39 S&F In Repair Vitreous China Pedestal Pattern Wash Hand Basin (Flat Back) White Of Size 550X400Mm Including One Number Chromium Plated Waste Fittings, 32 Mm Dia, Brass With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed, With & Including 32 Mm Dia Pvc Waste Pipe With Connector, Including Cutting For And Pinning In Ends Of Brackets Complete All As Specified. 40 S & F In Repairs Stainless Steel Sinks With Drainage Board Made Out Of 1.00 Mm Thick Sheet For Kitchen With Plugs, Washers, Waste Pipes, Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cast Iron Cantilever Brackets And Connecting Union To Pipe Overall Size 915 Mm X 460 Mm With Bowl Size 410Mm X 330Mm X 160Mm, With And Including Pvc Waste Pipe And Cp Waste Coupling 32 Mm Dia And Making Good To Disturbed Surfaces, Fixed In Repairs, Complete All As Specified. 41 S & Fixing 600 Mmx450 Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6 Mm Thick Ac Buildg Board Or Commercial Plywood And Fixed To Wooden Plugs With Cp Brass Screws And Cup Washers Complete All As Specified And Directed. 42 S&F In Repairs Concealed Stop Cock Type Cp With Long Shank Cast Copper Alloy Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends Of Size 15Mm Bore. Complete All As Specified And Directed. 43 S&F In Repairs Stop Cock/Angle Cock With Long Shank Cast Copper Alloy Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends Of Size 15Mm Bore. Complete All As Specified And Directed. 44 S&F In Repairs Bib Tap, Cast Copper Alloy With Capstan Head, Cp Fancy Type With Long Body Shank, Screwed Down With High Pressure Screwed For Iron Pipe & Fixed 15Mm Bore, Complete All As Specified And Directed. 45 S&F In Repair Pillar Taps Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered `Hot Or `Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed 46 Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/ Plastic Cleates. 47 S & F For Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches, Bore Of Pipe In 75 Mm, Etc Complete All As Specifed And Directed. 48 S & F For Pvc (Swr) Bends Any Radius, Bore Of Pipe In 75 Mm, Etc Complete All As Specifed And Directed. 49 S&F In Repair Brass Chromium Plated Shower Roses With Swivel Joints, 125 Mm Size In Square With Cp Long Shank Arm Including Fixing To Steel Pipe Or Union, Complete All As Specified And As Directed. 50 S&F Pvc Connections 15Mm Size With Ptmt Nuts Of Length 450 Mm, Complete All As Specified And As Directed. 51 S & F Brass Chromium Plated, Tubular Towel Rails 20 Mm Dia, D- Type, 60 Cm Long Between Flanges, Completed All As Specified And Directed. 52 S&F In Repair Kitchen Plate Rack Stainless Steel 1 Mm Thick Of Size 60Cmx75Cm Complete Fixed To Brick/Concrete Wall, With Screw Including Rawl Plug Complete All As Specified And As Directed 53 S&F Powder Coated Anodized Aluminum Frame For Partition, Doors, Windows, Ventilations With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified. 54 S&F Powder Coated Anodised Aluminium Window And Ventilator Shutters, Fixed/Side Hung Type Without Sash Bars, Aluminium Sectionsweighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips,Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Such As Peg Stays 150Mm Long (1 No.). Hinges Type B-21 100Mm Long (2 No.) Suitable Handle (1 No.) Complete All As Specified. 55 S&F Powder Coated Aluminium Grill (Anodised Transparent Or Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/ Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer In-Charge. 56 S & F Steel Windows Or Ventilators, Fixed Type, With Glazing Bars 57 S & F Stainless Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18 Mm And Fixed With Tinned Tacks Or Galvanised Wire Staple. 58 S & F In Repair Galvanized Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18 Mm And Fixed With Tinned Tacks Or Galvanised Wire Staple. 59 M&L For 3 Mm Thick,Figured Glass, Pin Head Type And Glazing With Oil Putty In Squares N Exc 0.5 Sq. M In Each Pane, Etc Completed All As Specified. 60 S&F For 4.8/5.0 Mm Thick Sheet Glass Ordinary Quality And Glazing Each Pane N Exc 0.50 Sqm Fixed With Neoprene Rubber Gasket In Aluminium Frame Work Complete All As Specified. 61 Framed Work Such As Grills, Gratings, Etc. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 62 Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Windows & Other Frames/ Chowkhat Of Size 100 X 50 Mm Comprising Of Virgin Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Comp Ressive Strength Of 58 N/Mm2 , Modules Of Elasticity 900 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/ Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/ Lugs/Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge. (M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately). →Note: For Wpc Solid Door/Window Frames, Minus 5Mm Tolerance In Dimension I.E.Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made.C Complete All As Specified And As Directed . 63 S & F Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of 30Mm Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge),Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In-Charge.(Note: Stainless Steel Butt Hinges And Necessary S Sscrews Shall Be Paid Separately) 64 Pressed Steel Frames Made Out Mild Steel Sheet 1.25 Mm Thick, With Size Of Frame 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plates Etc And Applying A Shop Coat Of Red Oxide Primer Including Providing Pcc 1:3 :6 Type C-0 Using 12.5 Mm Graded Crush Stone Aggregate For Filling Back Of Chowkhats Complete All As Specified And As Directed By The Engineer-In-Charge 65 Pressed Steel Frames Made Out Mild Steel Sheet 1.25 Mm Thick, With Size Of Frame 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plates Etc And Applying A Shop Coat Of Red Oxide Primer Including Providing Pcc 1:3 :6 Type C-0 Using 12.5 Mm Graded Crush Stone Aggregate For Filling Back Of Chowkhats Complete All As Specified And As Directed By The Engineer-In-Charge 66 S & F For Flush Shutters With Both Sides Matt Finish Laminate Incl Leeping On The Edges, Solid Core Construction , With Block Board Core And Plywood Face Panels , Commercial Type On Both Sides , Thickness 30 Mm , Etc Complete All As Spd And Directed 67 S & F 35 Mm,2Nd Class Hard Wood Factory Made, Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass,Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass,Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A);,Etc Complete All As Spd And Directed. 68 S&F 100 Mm Size Butt Hinges, Medium Weight, Cold Rolled, Stainless Steel Complete All As Specified And As Directed By Engineer-In-Charge. 69 150 Mm Long Stainless Steeel Anodized Barrel Tower Bolts Of Extruded Section Complete . 70 125 Mm Size, Stainless Steel Anodized Handles, Cast Type Complete All As Specified And Directed By Engineer-In-Charge. 71 300 Mm Long Stainless Steel Sliding Door Bolt, Plate Type With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate Complete 72 S & F 300 Mm Long Stainless Steel Ordinary Rat Tail Rod Pattern Door Spring Including Roller And Roller Plate Complete All As Specified And Directed By Engineer Incharge 73 S & F Floor Door Stopper Of Aluminium Alloy Body 140 Mm Cover Plate And Tounge , Anodized With Hard Drawn Steel Spring Fixed In Repairs 74 Taking Down, Easing, Adjusting Of Old Wooden Shutters Of Any Description Exc. 1 Sq,M And Not Exc. 2 Sq.M Each And Refixing In Same Opening After Tiling Work Complete All As Directed By Eic. 75 M&L Preparation Of New Steel Surfaces Of Any Description Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coat Of Synthetic Enamelled Paint Over One Coat Of Red Oxide Primer. 76 Preparation Of New Wooden Surface And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engineer-In-Charge. 77 Dismantling Water Tanks Exc 250 & N Exc 500 And Removing To Store,Etc Completed All As Spd And Directed. 78 S&F 500 Ltrs Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Verical With Closed Top) Hoisted And Fixed In Position Including Ball Valve Of 20 Mm Dia Complete All As Specifed And Directed. 79 S & F For Ball Brass Valves, High Pressure, With Polythene Float And Flynut Complete, Screwed For Iron Pipe Or Brass Ferrule And Fixed, Bore Dia Of Pipe In 20 Mm, Etc Complete All As Specifed And Directed. 80 Dismantling Brick Tiles Or Terracing Tiles, Single Layer On Roofs, Etc Complete All As Spd And Directed. 81 Demolation Of Mud In Roof Any Thickness Incl Plastering & Leeping Removed Complete All As Specified And Directed By Engineer-In-Charge. 82 M&L Plain Cement Concrete (1:2:4) Type B-1, Using 20 Mm Graded Mechanically Crushed Stone Aggregates As In Padding To Roof To Maintain The Required Slope And Finished The Surface Even And Smooth Without Using Extra Cement, Complete All As Specified