Tender For Special Repair/Replacement Of Certain Underground Lt Cables And Security Lights Of Depot Perimeter At Fad (Main) Suranussi
Tender Value
49.10 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
18 days left
EMD
98300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Certain Underground Lt Cables And Security Lights Of Depot Perimeter At Fad (Main) Suranussi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in Soft/disntegrated soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe/pole etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified & directed by Engr-in-Charge. |
| 2 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/disintegrated soil in any type of soil all as specified & directed by Engr-in-Charge. |
| 3 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed by Engr-in-Charge. |
| 4 | Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable and punned down to thicknes of 18cm in trenches complete all as specified.(Note :- For the purpose of payment only punned thickness 18 mm will be measured). |
| 5 | Supply and laying common burnt clay building brick Sub class B designation 75 laid flat in tranches over the cable with length of brick perpendicular to direction of cable length, abutting each other complete. |
| 6 | Supply, laying, jointing and testing of LT XLPE insulated,PVC sheathed armoured cable heavy duty, electric cable with aluminium conductor of size 6 Sq mm 2 core, 1100 volts grade including suitable size lugs, including passing through pipes, under floors roads complete, all as specified and directed. |
| 7 | Supply, laying, jointing and testing of LT XLPE insulated,PVC sheathed armoured cable heavy duty, electric cable with aluminium conductor of size 16 Sq mm 4 core, 1100 volts grade including suitable size lugs, including passing through pipes, under floors roads complete, all as specified and directed. |
| 8 | Supply, laying, jointing and testing of LT XLPE insulated,PVC sheathed armoured cable heavy duty, electric cable with aluminium conductor of size 25 Sq mm 4 core, 1100 volts grade including suitable size lugs, including passing through pipes, under floors roads complete, all as specified and directed. |
| 9 | Supply, laying, jointing and testing of LT XLPE insulated,PVC sheathed armoured cable heavy duty, electric cable with aluminium conductor of size 35 Sq mm 3.5 core, 1100 volts grade including suitable size lugs, including passing through pipes, under floors roads complete, all as specified and directed.Note for item No. 6 to 9:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately. |
| 10 | Supply and fixing rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) SPN 40 Amps all as specified and directed. |
| 11 | Supply , installation, testing and commissioning in replacement factory made and tested outdoor type LT panel board, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ, AC supply system having bus bar chamber with double door PVC sleeved Aluminium bus bar of rating 500 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15 mm CRCA MS sheet and 50X50X6mm thick MS angle iron frame work rear & front opening type of adequate and easy maintenance size for housing LT switchgear in separate compartment and measuring instruments,locking arrangement , duly powder coated on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size and rating and comprising of followings:- (Main Panel). The panel shall have MS legs to fix at site made out of size 50 x 50 x 6 mm angle iron frame of height 80 cm min. with necessary PCC work in 1:3:6 for fixing complete.Incoming:-(a) MCCB 415 Volts, 320 Amp rating 4 Pole, adjustable typeThermal Magnetic based release fixed for incoming supply with overload, short circuit and earth fault protection ( Service Breaking Capacity 35 KA, Ics=100% Icu : -1 No(b) Multifunction meter with LED display able to displying all Voltage, Amp, PF, kWH, KW, KVA - 01 No class 1 with RS485 part with reqd CTs set-3 of suitable rating(c) LED type Indicating lamps panel mounting type RYB-3 Nos(d) Suppply & fix Supply and fix ON LOAD change over switch 415V in 4 pole of capacity 315 Amps.-01 Nos. Please Enable Macros to View BoQ information |
| 12 | Supply , installation, testing and commissioning in replacement factory made and tested outdoor type LT panel board, cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ, AC supply system having bus bar chamber with double door PVC sleeved Aluminium bus bar of rating 500 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15 mm CRCA MS sheet and 50X50X6mm thick MS angle iron frame work rear & front opening type of adequate and easy maintenance size for housing LT switchgear in separate compartment and measuring instruments,locking arrangement , duly powder coated on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size and rating and comprising of followings:- (Main Panel). The panel shall have MS legs to fix at site made out of size 50 x 50 x 6 mm angle iron frame of height 80 cm min. with necessary PCC work in 1:3:6 for fixing complete.Incoming:-(a) MCCB 415 Volts, 320 Amp rating 4 Pole, adjustable typeThermal Magnetic based release fixed for incoming supply with overload, short circuit and earth fault protection ( Service Breaking Capacity 35 KA, Ics=100% Icu : -1 No(b) Multifunction meter with LED display able to displying all Voltage, Amp, PF, kWH, KW, KVA - 01 No class 1 with RS485 part with reqd CTs set-3 of suitable rating(c) LED type Indicating lamps panel mounting type RYB-3 Nos(d) Suppply & fix Supply and fix ON LOAD change over switch 415V in 4 pole of capacity 315 Amps.-01 Nos. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender