Tender For Repair/Replacement To Joinery Works Including Partitions, False Ceiling, Acp Works And Other Connected Works In Buildings Of Area E & Das At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
70 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
26 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Joinery Works Including Partitions, False Ceiling, Acp Works And Other Connected Works In Buildings Of Area E & Das At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames exceeding 1.5 Sqm but n exc 4.00 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed. |
| 3 | S&F plain, solid, 2nd hard wood class straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with the glue pinned at joints as in doors and windows with 2nd class hardwood complete all as specified and directed. |
| 4 | S&F flush shutters, solid core construction 30 mm thick with block board core and plywood face panels, commercial type with both side decorative face veneer with lipping/frame to match all as specified and directed.Note: The rates for flush shutters include for provision of suitable blocks for taking mortice locks, latches or other fittings. |
| 5 | S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed. |
| 6 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed. |
| 7 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed. |
| 8 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 174 of SSR Part -II complete all as specified and directed. |
| 9 | S&F powder coated Aluminium window frame two track outer frame 62.0 mm x 31.5 mm x1.50 mm and guide rail of section Nos size 62 x 31.5mm x1.50mm and shutter section (i) vertical section & interlock section:- 38 x 20 x 1.50 mm, (ii) Top/Bottom section:-41 x 20 x 1.5mm sliding type including 4.0mm thick coloured tinted glass of selected quality and fixed with rubber beading,complete and aluminium hardware fittings including taking down existing one complete all as specified and directed. |
| 10 | S&F powder coated Aluminium window frame Three track outer frame 92.36 mm x 29.70 mm x1.50 mm and guide rail of section Nos size 92.36 x 29.70 x1.50mm and shutter section (i) vertical section & interlock section:- 38 x 20 x 1.50 mm, (ii) Top/Bottom section:-41 x 20 x 1.5mm sliding type including 4.0mm thick coloured tinted glass of selected quality and fixed with rubber beading, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete and aluminium hardware fittings including taking down existing one complete all as specified and directed. |
| 11 | S&F for anodiese aluminium decogrill of approved degin/pattern fixed to window frame with SS screws, including cutting the grill to proper complete including taking down existing one complete all as specified and directed. |
| 12 | S&F factory made UPVC white colour sliding window three track of any size made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (92.5mm x 45mm), sliding sash (42mm x 59 mm). Sliding mesh Sash (28mm x 58mm) sliding interlock (one vertical lenght in each shutters) (45mm x 40mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + - 0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated ), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by the contractor Including cost of glass and all other connected accessories. Net opening will be measured for payment purpose. |
| 13 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choice lamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadings complete including taking down existing one.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx)Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx)Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx) |
| 14 | Material and labour for partition wall (Pannels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket, 5.5mm thick sheet glass and 6mm thick prelaminated partical board, interior grade with decorative choice lamination complete all as specified and directed. Note :-The scope of work include for taking down existing damaged aluminium door/window/grill/panels and the unit rate quoted shall be deemed to include for the same. Please Enable Macros to View BoQ information |
| 15 | Material and labour for partition wall (Pannels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket, 5.5mm thick sheet glass and 6mm thick prelaminated partical board, interior grade with decorative choice lamination complete all as specified and directed. Note :-The scope of work include for taking down existing damaged aluminium door/window/grill/panels and the unit rate quoted shall be deemed to include for the same. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender