Tender For Special Repair To Building No Arrah Barrack-3 In Danapur Cantt
Tender Value
1.36 Crore
Estimated cost
Bid Submission
02 Nov 2026
21 days left
EMD
2.11 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Arrah Barrack-3 In Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Demolition of Brick tiles or terracing tiles, double layer on roofs complete all as specified and directed. |
| 3 | Demolition of cement Concrete above ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 5 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 7 | M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 8 | S&F Steel work as in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 9 | S&F Mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165 |
| 10 | Dismantling timber scantling 40 Sqcm and over in section in any position framed work complete all as specified and directed. |
| 11 | M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed. |
| 12 | Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 13 | Taking up or down steel/CPVC tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 14 | Supplying and laying of CPVC pipes (16 mm outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 15 | Supplying and laying of CPVC pipes (20 mm outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 16 | Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. |
| 17 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 18 | S&F Rotational moulded polyethylene water storage tanks 500 litre capacity in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 19 | S&F Rotational moulded polyethylene water storage tanks 1000 litre capacity in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 20 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 21 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 22 | Dismantling wall and ceiling boards of any thickness, including cover fillets etc complete all as specified and directed. |
| 23 | S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm complete for false ceiling complete all as specified and directed. |
| 24 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 25 | M & L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre 8 mm thick for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 26 | Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to store complete all as specified and directed. |
| 27 | M&L Mild steel angle iron door frame 40 x 40 x 6 mm conforming to Fe 410.0 incl 12mm dia deformed bars for strengthening at bottom of chowkhat incl cutting floor to accommodate strengthening bar & making good in PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) complete all as specified and directed. |
| 28 | M & L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 29 | M & L Cutting holes in brick walls exc half brick and n exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 30 | S&F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 31 | Same as item No 30 above but without glazing bars. |
| 32 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated complete all as specified and directed. |
| 33 | S&F Butt hinges, medium weight,cold rolled mild steel and fixed of size 125 mm long. |
| 34 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long. |
| 35 | S&F aluminium handles of size 125 mm cast type, anodised |
| 36 | S&F 4 mm thick sheet glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane, |
| 37 | S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed. |
| 38 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete.Note : Liquid WPC will be measured and paid separately. |
| 40 | M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L two coat of cement base paint on wall over a coat of primer including preparation of newly plastered surfaces complete all as specified and directed. |
| 42 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 43 | Demolition of existing treatment of roof/ parapet, Mud puska on roof /parapet including plastering, brick tiles, stone slabs and leeping any thickness including removal of debris from site complete all as specified and as directed. |
| 44 | M & L average thickness 25mm, plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in padding / levelling course for maintain to proper slope of roof including necessary form work as required complete all as specified and directed. |
| 45 | M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement or as per manufacturer's instruction finished surface even and smooth with out using extra cement complete all as specified and directed.(Note : WPC will be measured & paid for separately). |
| 46 | Supply only water proofing compound (Liquid) ISI marked complete all as specified and directed. |
| 47 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. |
| 48 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 49 | Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls as directed. |
| 50 | Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed. |
| 51 | M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing of conduit & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs for one light/fan point controlled by one switch complete all as specified and as directed. (Note : wiring with 2 X 1.5 sqmm +1 X 1.5 sqmm run with proper colour code as per IE rules measured in one unit ) Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 52 | Same as item No 51 above but one bell point controlled by one bell Push. |
| 53 | Same as item No 51 above but one 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 54 | Same as item No 51 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 55 | Same as item No 51 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 5/15/16 amps point on the independent board. (Note : wiring with 2 X 2.5 sqmm +1 X 2.5 sqmm run with proper colour code as per IE rules measured in one unit) |
| 56 | Same as item No 51 above but wiring with 4.0 sq mm single core copper conductor for one socket out let 15/25 amps point on the independent board.(Note : wiring with 2 X 4.0 sqmm +1 X 4.0 sqmm run with proper colour code as per IE rules measured in one unit) |
| 57 | S & F Switch piano, flush type single pole, one way 6 Amp complete all as specified and directed. |
| 58 | S & F electronic fan regulator AC 240 V step type socket type complete all as specified and directed. |
| 59 | S & F Bell push, flush type, 5 amp complete all as specified and directed. |
| 60 | S & F Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed. |
| 61 | S & F Switch socket combination 2in 1, 6A flush type complete all as specified and directed. |
| 62 | S & F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and directed. |
| 63 | S&F Single pole and neutral enclosure 240 volts with a two pin and earth plug and socket including one single pole MCB 20 Amps complete all as specified and directed. |
| 64 | S & F bell multi music type complete all as specified and directed. |
| 65 | S & F ceiling rose 3 terminal PVC/polycarbonate isolated body type with necessary fittings complete all as specified and directed. |
| 66 | Supply and fixing LED lights fitting 1x 18 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 67 | Refixing tube light any type complete all as specified and directed. |
| 68 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/ ceilling mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 69 | Refixing Ceiling light any type complete all as specified and directed. |
| 70 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 71 | Supply & fix wall-mounted fan of 400 mm sweep, 230 volts single phase, oscillating mechanism including necessary mounting brackets and all fittings complete all as specified and directed. |
| 72 | M&L for Sub main wiring PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor three phase of size 16.0 Sqmm nominal cross sectional area ( for R,Y,B & N) & including non metallic rigid PVC conduit ISI marked medium grade with all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement mortar and existing colour painting after fixing of conduit & 16.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs complete all as specified and directed. (Note : wiring with 4 X 16.0 sqmm +1 X 16.0 sqmm run with proper colour code as per IE rules measured in one unit ) Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 73 | M&L for Sub main wiring PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor three phase of size 10.0 Sqmm nominal cross sectional area ( for R,Y,B & N) & including non metallic rigid PVC conduit ISI marked medium grade with all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing of conduit & 10.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs complete all as specified and as directed. (Note : wiring with 4 X 10.0 sqmm +1 X 10.0 sqmm run with proper colour code as per IE rules measured in one unit ) Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 74 | M&L for Sub main wiring PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor single phase of size 6.0 Sqmm nominal cross sectional area ( for L & N) & including non metallic rigid PVC conduit ISI marked medium grade with all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing of conduit & 6.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs complete all as specified and as directed. (Note : wiring with 2 X 6.0 sqmm +1 X 6.0 sqmm run with proper colour code as per IE rules measured in one unit ) Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 75 | M&L for Sub main wiring PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor single phase of size 4.0 Sqmm nominal cross sectional area ( for L & N) & including non metallic rigid PVC conduit ISI marked medium grade with all conduit accessories in concealed wiring system by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing of conduit & 4.0 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs complete all as specified and as directed. (Note : wiring with 2 X 4.0 sqmm +1 X 4.0 sqmm run with proper colour code as per IE rules measured in one unit ) Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 76 | Supply and fixing double door VTPN DBs 415 volt rated voltage 4 way of powder coated DB's suitable for incoming 125 A MCCB and MCB's fitted with bus bar rated capacity,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. |
| 77 | Supply and fix MCCB 125 Amps FP breaking capacity 16 KA complete all as specified and directed. |
| 78 | Supply and fixing double door SPN DBs 240 volts rated voltage 12 way of powder coated DB's suitable for MCB's fitted with bus bar 200 A rated capacity,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed . |
| 79 | Supply and fixing double door SPN DBs 240 volts rated voltage 08 way of powder coated DB's suitable for MCB's fitted with bus bar 200 A rated capacity,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed . |
| 80 | Refixing of serviceable DBs of any type as directed. |
| 81 | Supply and fixing MCB TPN 40 to 100 Amps 10 KA ,C-series, 415 Volt including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 82 | Supply and fixing MCB SPN 240 volts 32-63 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 83 | Supply and fixing MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 84 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables/ wall mounded by clip or concelled by cutting/chesing of wall and making good disturbed surface of wall with cement morter and existing colour painting after fixing, heavy duty with aluminium conductor of cross sectional area 35 sqmm 3.5 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer, clamp etc complete as specified and as directed. Note: Cost of earth work, sand cushioning and brick protection as required at site is deemed to be included in rate quoted against this item. |
| 85 | Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender