Tender For Certain Repair And Maintenance To Flooring, Roofing, Plumbing, Joinery And Other Misc Works In repair of Pcda Office Transit Facility And Ajay Meru Residential Colony Under Dad Under Ge(S) Jaipur At Mil Stn Jaipur
Tender Value
39.55 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
15 days left
EMD
79100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair And Maintenance To Flooring, Roofing, Plumbing, Joinery And Other Misc Works In repair of Pcda Office Transit Facility And Ajay Meru Residential Colony Under Dad Under Ge(S) Jaipur At Mil Stn Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil complete all as specified and directed. |
| 2 | Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed |
| 3 | Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 4 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed. |
| 7 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 8 | M&L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces after applying anticorrosive paint over cleaned rusted steel surface including demolition old RCC surfaces (chajjas, fins, beams , borders etc and applying 30mm thick polymer modified mortar in CM 1:3 including mixing of polymer latex additives for repair of Chajjas fins, border etc complete all as specified and directed.Note :- (i) Cleaning of rusted part of steel and applying anticorrosive paint over it.(ii) Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction. (iii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iv) To achieve required thickness repeat this step after 24 hrs as required.(v) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed.(vi) Rate shall be inclusive of all necessary scaffolding for building of height upto two storey.Make :- (i) The epoxy bonding agent shall be Krishna / Dr Fixit / MC Bauchemie / M/s Cemistik / Sika or equivalent as approved by GE.(ii) Polymer latex addictive shall be of Sika / Fosroc / Dr Fixit or equivalent as approved by GE. |
| 9 | M&L brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in Brick walls/RCC cutting not exc 10 cm girth complete all as specified and directed. |
| 11 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or any horizontal portion and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 12 | M&L for Neoprene / EPDM (Ethylene Propylene Diene Monomer) rubber gasket complete all as specified and directed. |
| 13 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 14 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 15 | S&F second class hard wood 35 mm thick glazed and skeleton shutters, (having 04 to 06 Nos of panel) open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 16 | S&F 40 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, with both face are covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 17 | Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 18 | S&F for Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing on section 8 of SSR 2020 Part-II complete all as specified and directed. |
| 19 | S&F Factory made Solid PVC Moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded Prelam PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 20 | S&F factory made uPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ±0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, for area not exceeding 2.00 sqm each complete as specified and directed.Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose. |
| 21 | S&F stainless steel, curtain rod holder, fancy type for 20mm dia curtain rod fixed with srews and rawl plugs complete as all specified and directed. |
| 22 | S&F curtain rod stainless steel decorative knob / side bulb for drapery rod of 20mm dia complete as all specified and directed. |
| 23 | S&F in repair 20 mm dia stainless steel, silver & chrome finish, fancy type, anti-rust curtain rod complete as all specified and directed. |
| 24 | S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 25 | S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed. |
| 26 | S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed. |
| 27 | S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed. |
| 28 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete as all specified and directed. |
| 29 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 30 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including removing MS screws and welding if required over steel window and removing aluminium clips / PVC beads in aluminium window and UPVC window complete all as specified and as directed. |
| 31 | S&F 100 mm long stainless steel butt hinges fixed with CP finish steel screws as in PVC door complete all as specified and directed. |
| 32 | S&F in repair handles, stainless steel of 125 mm size, oval shape, fancy type complete all as specified and directed. |
| 33 | S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. |
| 34 | M&L in repair for auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed. |
| 35 | S&F mild steel framed work for windows grills such as grills, ladders, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / window and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 36 | M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 37 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 38 | M&L for running welding in repairs , thickness of metal to be welded not exc 6 mm complete all as specified and directed. |
| 39 | M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 40 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Glass and other filling material in panels shall be measured and paid seperately. |
| 41 | S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21, 100 mm long (2 No) , suitable handle (1 No) complete all as specified and directed. |
| 42 | Taking down existing aluminium window/UPVC window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed. |
| 43 | M&L for carried out water roof treatment as under : (a) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound for cracks up to 5mm width / depth of cracks. (b) Cracks of more than 5mm width / depth are filled with URP cement grouting by injecting through nozzles till refusal. The size and spacing of nozzles shall be as per manufacturer instruction or as directed by Engineer-in-Charge.(c) After drying, the roof coat paint shall be applied at rate of one liter per square meter with roller in both direction with a minimum gap of 12 hours’ time period for each direction over a self-primer coat at rate of 0.50 liter of water mixed to one liter of roof coat paint (three coats including primer shall be applied).(d) The roof treatment shall be got carried out by the manufacture or their authorised applicators only. (e) Necessary guarantee for 5 years shall be submitted by the contractor.Make : (i) Roof Coat : Berger (HS Damp Shield Elasto) / Asian (Smart Care Damp Proof) / Sika (Sikalastic-510 CoolCoat) or equivalent as approved by GE.(ii) Cement Grout : Dr. Fixit (Fixit Pidicrete URP Model:301) or equivalent in Fosroc / Choksey chemicals / Sika / Berger (HS Super Grout) or equivalent as approved by GE. |
| 44 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 45 | M&L for machine cut kota stone slab flooring mirror finished 40-50 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 46 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 47 | M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate finished even & smooth without using extra cement with integral water proofing compound at rate of 03% per KG of cement of make approved by GE and curing the same as per manufacturer instruction complete all as specified and directed. |
| 48 | M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm / 600x 1200x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. |
| 49 | M&L for joint free non skid coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 50 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 51 | M&L for chequered cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 53 | M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 54 | M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:6 and to be finished even and fair complete all as specified and directed. |
| 55 | M&L for applying smartcare Hydroloc damp proof in two coats over old or newly plastered surfaces including preparation of surfaces for treating dampness and efflorescence as per manufacturer's instruction complete all as specified and as directed. |
| 56 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 57 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. |
| 58 | M&L for rendering 05 mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed . |
| 59 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick or concrete surface of ceiling finished even and fair complete all as specified and directed. |
| 60 | M&L for preparation of old plastered surfaces of walls by complete removal and applying two coat of distemper oil imulsion complete all as specified and directed. |
| 61 | M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 2mm thick wall putty complete all as specified and directed. |
| 62 | M&L for preparation of new surface of ceiling of any description and applying two coats of oil bound distemper (OBD) over a coat of chalk whiting on plastered surfaces preparatory to distempering over and including 2 mm thick wall putty all as specified and directed. |
| 63 | M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 64 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description and applying two coats of oil bound distemper (OBD) over a coat of primer and including 1 mm thick wall putty all as specified and directed. |
| 65 | M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of acrylic emulsion exterior graded weather proof paint over a coat of alkaline resistance primer including scffolding upto four storey building complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 66 | M&L for preparation of old plastered external surfaces of walls and applying one coat of acrylic emulsion exterior grade weather proof paint complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 67 | M&L for preparation of new surface of walls of any description with a coat of 2mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 68 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 69 | S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 70 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed. |
| 71 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 72 | M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 73 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 74 | S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. |
| 75 | S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, inlet, ball valve, float, handle, fasterner for fixing, 450mm long PVC connection etc complete all as specified and directed. |
| 76 | Cleaning of sewage line 150 mm dia SGWG /RCC NP 2 pipe or any other specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including disposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. Note : Contractor has to depute extra labour for cleaning of sewage lines to clear the blockage in sewer lines as and when required. |
| 77 | S&F in repair for 15mm bore dia of pipe brass CP fancy type ,with crutch butter fly handle , wash hand basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.Make : Kohler CAT Part No 22534IN-4-CP / Grohe CAT Part No 32851000 or equivalent as approved by GE. |
| 78 | S&F in repair brass chromium plated overhead shower rose of 200 X 200 mm size, square / round shape, with revolving / swivel joint complete all as specified and directed. |
| 79 | M&L for cast iron nahani trap with grating including jointing to waste pipe 100 mm diameter of outlet fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 80 | M&L for scooping and taking out sludge and foreign material from manhole of any size of depth not exc 1.50m and including removing and re-fixing of manholes covers and appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out side defence land and disposed off at distance not less than 1.5 KM away from defence land which is not detrimental to public health complete all as specified and as directed.Note :- Net volume of internal size of each manhole, up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry/wet sludge etc complete all as specified and directed. |
| 81 | M&L for scooping and taking out sludge and foreign material from manhole of any size of depth exc 1.50m but not exc. 3.00m depth and including removing and re-fixing of manholes covers and appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out side defence land and disposed off at distance not less than 1.5 KM away from defence land which is not detrimental to public health complete all as specified and as directed.Note :- Net volume of internal size of each manhole, up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry/wet sludge etc complete all as specified and directed. |
| 82 | M&L for Double Wall Corrugated (DWC) pipe of class SN-4, IS-16098 (part-II) of 150mm bore (internal), laid to slope in trenches, jointed complete with coupler, bends, Tee, reducers etc and tested complete all as specified and directed.Make : Ultra plus of Supreme / Corfit of Prince / D-Rex of Astral or equivalent as approved by GE. |
| 83 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 84 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends any radius of 75 mm bore without access door complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius of 110 mm bore without access door complete all as specified and directed. |
| 87 | S&F PVC (SWR) junction single,(Single T) equal or unequal of 110 mm bore of pipe with access door complete all as specified and directed. |
| 88 | M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed |
| 89 | S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed. |
| 90 | S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed. |
| 91 | Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 92 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 93 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. |
| 94 | S&F in repair stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed. |
| 95 | S&F waste coupling of PTMT for 32 mm bore dia of pipe half or full threaded (minimum weight 45gms) complete all as specified and directed. |
| 96 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 97 | S&F in repair Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including provision of lime concrete bedding ,'P' or 'S' trap 100 mm bore, anti-syphonage pipe and connection etc and making good to floor complete all as specified and directed. |
| 98 | M&L in repair toilet paper holder , of stainless steel with flat recessed type, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Jaquar CAT Part No. CPA-CHR-1151 / Grohe Cat Part No. 40367000 / Kohler cat Part No. K-5633IN-CP or equivalent as approved by GE. |
| 99 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 100 | S&F in repair looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed. |
| 101 | S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 102 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 103 | S&F chromium plated towel ring round (20cm dia) / square (20cm x20cm) shape (minimum weight 300gm) with round flange complete all as specified and directed. Make:- Grohe CAT Part No. 40655001 / Kohler CAT Part No. K-5631IN-CP or equivalent as approved by GE. |
| 104 | S&F in repair for single piece WC With UF Soft Close Slim Seat Cover, Hinges, Flush Cistern Fitting, fixing accessories S / P Trap as per manufacturer instructions complete all as specified and as directed. Make : Hindware Cat Part No. 92565 (S-22) / Cera Cat Part No. S1013123 or equivalent as approved by GE. |
| 105 | S&F in repair chromium plated soap dish holder complete all as specified and directed. |
| 106 | S&F in repair for 15mm bore, 3-in-1 wall mixer, brass CP, fancy type, for mixing hot & cold water, having connection for overhead and hand shower and including screwed down for iron pipe or for union along with spout complete all as specified and directed.Make:- Grohe Cat Part No. 23198000 / Kohler cat Part No. 99460IN-4-CP or equivalent as approved by GE. |
| 107 | S&F in repair kitchen plain basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 108 | S&F in repair kitchen perforated cutlery basket of stainless steel size 17\\" x 20\\" x 4\\" of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 109 | S&F in repair kitchen cup & saucer basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 110 | S&F in repair kitchen plate / thali basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 111 | S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed. |
| 112 | S&F in repair for 15mm bore dia of pipe, brass CP, wall mounted sink / basin mixer (with minimum weight 1.2 Kg) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.Make : Kohler CAT Part No 5681IN-4ND-CP / Grohe CAT Part No 19571002 or equivalent make as approved by GE. |
| 113 | S&F in repair float corner glass shelve 8 mm thick 250 mm radius complete all as specified and directed. |
| 114 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 115 | Demolition of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed. |
| 116 | Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 117 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 118 | Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed. |
| 119 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 120 | Dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed. |
| 121 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender