Tender For Certain Bldg Repair Works, Roof Repair & Facia/ Chajja Repair And Sunken Repair Work In 5 Ladakh Scouts, 359 Asc Supply & Aft Under Age B/R-Ii At Chandimandir
Tender Value
49 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
3 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Bldg Repair Works, Roof Repair & Facia/ Chajja Repair And Sunken Repair Work In 5 Ladakh Scouts, 359 Asc Supply & Aft Under Age B/R-Ii At Chandimandir
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Revised BoQ | BOQ | 26-Oct-2026 |
| 2 | 17-Oct-2026 | Revised Page | Other | 26-Oct-2026 |
| 3 | 17-Oct-2026 | Revised Page | Other | 02-Nov-2026 |
| 4 | 17-Oct-2026 | Revised BoQ | BOQ | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material complete all as specified and directed. |
| 4 | Demolition of brick work masonry, built in cement mortar including dismantling all quions, arches, pillars etc complete all as specified and directed. |
| 5 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in plinth protection/ path/ Hard standing/ floor etc. etc complete removal of debris outside MD land. |
| 6 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof), complete all as specified & directed. |
| 7 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar, including removal of any type existing treatment complete all as specified & directed. |
| 8 | Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removal, complete all as specified and directed. |
| 9 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed |
| 10 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 11 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed. |
| 12 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 13 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 14 | Taking down shutter of any description not exc 1 Sqm including easing and adjusting shutters and refixing in the same opening complete all as specified and directed. |
| 15 | Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed. |
| 16 | Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including filling of PCC 1:3:6 in hollow frame complete all as specified and directed. |
| 17 | 2nd class head wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of farming plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of membres of shutters as specified in SSR Pt-1, section 8, clause 8.24- (a), supplied and fitted to chowkats, complete all as directed. |
| 18 | Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed. |
| 19 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge |
| 21 | Factory made steel windows (Box type) primer coated with glazing bar and openable shutter prepared to receive sheet glass complete including cutting holes, (four Nos for each window) and making good dismantled portion in PCC (1:2:4) type B1 including following fittings welded to frame/ shutter taking down existing window complete all as specified.(a) Hold fast 150mm out of 25 x 6 mm flat iron bend to shape, 04 Nos each window (02 Nos on each side).(b) Handle of Z section 20mm x 25mm, 100 mm long -01 No each leaf. (c) MS tower bolt 150mm long, 02 Nos each leaf.(d) Z section 20mm x 25mm, 100 mm long stopper -01 No each leaf.(e) Cleat 55 mm long of hollow square section of 15mm x 15mm of 24 gauge thickness, welded to hinge of 55mm size, 01 No each leaf.(f) MS box type hinges of 75 mm size, 02 Nos per leaf.(g) Fabrication and fixing complete. Note: (i) Glass panes, MS wire cloth & painting shall be measured and paid for separately. (ii) MS flat iron fixing of wire cloth and window shutters shall be included in item rate. |
| 22 | All as per item No 21 here in before but without glazing bar complete all as specified and directed. |
| 23 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, fixed as in repair all complete all as specified and directed. Note: Rate included in upto seven storey building including necessary arrangement complte all as specified |
| 24 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, fixed as in repair all complete as per architectural drawings and the directions of Engineer-in-charge.Note : Rate included in upto seven storey building including necessary arrangement complte all as specified |
| 25 | Factory made 20mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one side prelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent / adhesive, fixed as in repair complete all as specified and directed. |
| 26 | Continuous (Piano) hinges, bright finish or electrogalvanised 30mm (width of flap when open) , mild steel , complete all as specified and directed. |
| 27 | Stainless steel self closing hinge of 75 mm size for WPC door shutter complete as specified and directed. |
| 28 | Supply and fixing 50 X 15 mm size magnet door catcher for closing for WPC door shutter complete as specified and directed. |
| 29 | Supply and fixing 150 mm size SS mat / glossy finish handle complete as specified and directed. |
| 30 | Hacking out old broken glasses of any description from metal frames including punching or drilling out old glazing pins/springs clips and providing and fixing, complete all as specified and directed. |
| 31 | 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 32 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 33 | 5.5mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels not exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 34 | 5.5mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 35 | 9mm thick pre laminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber /aluminium frame work complete all as specified and directed. |
| 36 | Mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, fixed as in repair complete all as specified and directed |
| 37 | Door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, fixed as in repair, fixed complete all as specified and directed. |
| 38 | 150 mm aluminium handles 'D' type all as specified and directed. |
| 39 | Sainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 40 | Butt hinges 100mm mild steel cold rolled, medium weight, complete all as specified and directed. |
| 41 | Butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed. |
| 42 | 150mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed |
| 43 | 200mm aluminum anodized barrel tower bolts of extruded section, complete all as specified. |
| 44 | 150mm stainless steel handles, cast type anodized, complete all as directed. |
| 45 | Aluminum alloy, anodized, sliding door bolt 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 46 | Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (150mm size), complete all as specified and directed. |
| 47 | PVC sheet fillet 35mm wide, 5mm thick for wall paneling inclusive of fixing in to wall to make PVC frame complete all as specified and directed. |
| 48 | PVC lining coloured or selective pattern, PVC lining of hollow profile not less than 5mm thick and not less than 250mm wide intelocking type system as in wall/celing linings including end and intermediet U or L PVC sections as per manufacturer instructions , fixed as in repair complete all as specified and directed(Note : Colour/design and pattern shall be as decided by the GE) |
| 49 | Powder coated GI Frame work grid Size of grid 605 x 605mm for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed |
| 50 | 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified. |
| 51 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0, all as specified and directed. |
| 52 | Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement. |
| 53 | Rendering 15mm thick on fair faces of brick work or concrete surface of ceiling in CM 1:6, surface finished even and smooth without using extra cement. |
| 54 | Rendering 10mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth without using extra cement. |
| 55 | Brick work with sub class 'B' bricks, straight/curved on plan exc 6M mean radius built in CM 1:6 complete. |
| 56 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of primer complete all as specified and directed. |
| 57 | Preparation of old decorated plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified. |
| 58 | Preparation of new plastered surfaces of wall and applying two coats of cement base paint (any colour) over chalk whiting, complete all as specified and directed. |
| 59 | Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 60 | Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 61 | Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 62 | Machine Cut Kota Stone Slab flooring, 20-25mm thick (one piece), best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 63 | Machine Cut Kota Stone Slab flooring, 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, and polishing complete over and including 10mm thick rendering in CM 1:4 all as specified and directed. |
| 64 | Mirror polishing on Marble/Granite/Kota stone/Stone work whenever required to give high gloss finish complete all as specified and directed. |
| 65 | 18mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick CM 1:4 compelte all as specified and directed. |
| 66 | Providing edge moulding to 16-18 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 67 | Coloured vitrified ceramic tiles, 8-9mm thick (square / rectangular) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 68 | All as per serial item No 67 herein before but in skirting including neccessary cutting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed |
| 69 | Coloured vitrified ceramic tiles, light shade, 8-9mm thick (square/rectangular) , area of each tiles exc 0.42 sqm but n.exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 70 | All as per serial item No 69 herein before but in skirting including neccessary cutting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 71 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 72 | Non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:4, complete all as specified and directed. |
| 73 | Glazed ceramic coloured printed tiles in vertica surfaces of size 300 x 450 x 7mm set and jointed in neat cement slurry over and including 10mm thick rendering in CM 1:4 for receiving the tiles complete all as specified. |
| 74 | 30mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor even and rough to receive the top finishes like Kota stone/floor tiling complete all as specified and directed. |
| 75 | 75mm thick cement concrete type C2, (1:3:6) (using 40mm graded aggregate) as in Plinth protection finished the concrete surface even smooth using extra cement complete all as specified and directed. |
| 76 | PVC (SWR) pipe 75mm bore of pressure rating 6 kg/cm2 single socketed in any length with rubber ring joints, fixed to walls or laid in floor, fixed as in repair complete all as specified and directed. |
| 77 | PVC (SWR) pipe 110mm bore of pressure rating 6 kg/cm2 single socketed in any length with rubber ring joints, fixed to floor, fixed as in repair complete all as specified and directed. |
| 78 | PVC (SWR) pipe 110mm bore of pressure rating 6 kg/cm2 single socketed in any length with rubber ring joints, fixed to walls with PVC clamp fixed as in repair complete all as specified and directed. |
| 79 | 75 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed. |
| 80 | 110 mm bore PVC (SWR) bends of any radius, fixed s in repair complete all as specified and directed. |
| 81 | 110 mm bore PVC (SWR) Junction (Single T) equal or un equal, fixed as in repair completeall as specified and directed. |
| 82 | 75 mm bore PVC (SWR) Junction (Single T) equal or un equal, complete all as specified and directed. |
| 83 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1(1:2:4) , fixed as in repair complete all as specified. |
| 84 | Vitreous china wash hand basin, white, angle back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, 32mm bore brass CP waste fitting, PVC Connection, PVC waste pipe cutting for and pinning in ends of bracket or erecting stand, fixed as in repair complete all as specified and directed. |
| 85 | Vitreous china squatting pan \\"orissa\\" pattern, size 580 x 440 mm white, with integral foot rest including 'P' or 'S' trap (excluding flushing cistern and flush pipe) and making good to the floor fixed as in repair complete all as specified & directed by Engineer-in-charge. |
| 86 | Vitreous China Wash down water closet (pedestal pattern) , white, (excluding, flushing cistern and flush pipe) with and including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe fixed as in repair complete all as specified and directed. |
| 87 | 10 litre capacity PVC valveless, symphonic action type, low level flushing cistern white complete with inlet, ball valve float and handle incl bracket fixed as in repair complete all as specified and directed. |
| 88 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. |
| 89 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 90 | 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, fancy type as in repair complete all as specified and directed. |
| 91 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 92 | Wall mixer, mix for mixing hot or cold water, chromium plated suitable for 15mm bore GI pipe or union, fixed as in repair complete all as specified and directed. |
| 93 | 15mm bore CP urinal valve auto closing system (push cock) with built in control and wall flange all as specified. |
| 94 | PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repair, complete all as specified and directed. |
| 95 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore,fixed as in repair complete all as specified and directed. |
| 96 | 20mm dia brass chromium plated towel rail 600mm long fixed with chromium plated screws with pvc rawl plugs fixed as in repair complete all as specified and directed. |
| 97 | Health faucet brass chromium plated (health faucet with 01 m pipe & wall hook) for 15mm bore with fittings, fixed as in repair complete all as specified and directed. |
| 98 | Beveled edge mirror of selected quality glass of 5mm thick each providing 04 Nos hole of corner ,fixed with 4 Nos of 3 inch screws and rawl plugs including 4 Nos good quality SS Cap (on screw head) etc, complete all as specified and directed. |
| 99 | Kitchen Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and directed |
| 100 | Vitreous chins urinal, Half stall type, white complete including providing and fixing clamps, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 40mm dia brass chromium plated waste coupling and waste pipe, grating and union for discharge pipe fixed as in repair complete all as specified and directed. Make cera sanitaryware S 4020102: or equivalent as specified in PS |
| 101 | Urinal spreader brass chromium plated suitable for fixing with 15 mm dia pipe fixed as in repair complete all as specified and directed. |
| 102 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking out old pipe complete all as specified and directed. |
| 103 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking out old pipe complete all as specified and directed. |
| 104 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed pipe etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 105 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, including tank nipple, float valve of PTMT 20mm bore etc, and dismantling of existing water tank complete all as specified. |
| 106 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) Triple layered hoisted and fixed in position, including tank nipple, float valve of PTMT 20mm bore etc, and dismantling of existing water tank complete all as specified. |
| 107 | Demolition of cement concrete exc 15cm thick of any description and in any position not other wise specifically provided for and removing all demolished material/debris to out side MD Land complete all as specified and directed. |
| 108 | Providing cement concrete type E2, 1:5:10 using 40 mm graded stone aggregate, as in sunken filing, mass concrete etc., complete all as specified and as directed |
| 109 | Water proofing of the sunken portion using a flexible two part acrylic polymer modified cementitious liquid water proofing coating \\"Sika TOP 107 seal flex IN\\" or equivalent. Which include the substrate preparation by mechanical mean in ordere to clean the area from dust/loose particle. contamination etc. Repairing surface irrugularties damaged concrete surface crack, bugs hole or potholes in base slab. if any, with an acrylic polymer , sika latex SBR or equivalent modified motor. These substrate shall then be cleaned using high pressure water jet or other method, properly prewetted to SSD condition before coating. post substrate repair a primer coat shall be applied using a synthetic rubber emulsion base cementitious coating system, using brush or roller.(sika SBR latex to be added with OPC cement /or water dilution as per PDS).once primer applied , two coat of flexible two part acrylic polymer modified cememtious liquid applied water proofing coating using\\" Sika top 107 sealed flux IN\\" pr equivalent shall be applied including fibre mesh with a consumption rate 2kg/sqm for two coats, which must meet the technical specification as under:- Tensile strength > 1.5mm N/mm2 as per ASTM D412-92. Elongation of break> 105% as per astm d412-92. Hardness shore A> 40ASTM D2240:91, complete all as spcified and directed. |
| 110 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etc and hoisting if required reconnecting and refixing in position of capacity exc 500 ltrs but n.exc 1000 ltrs, complete all as specified & directed. |
| 111 | Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in cement concrete in roof padding, mass complete all as specified & directed. |
| 112 | Rendering 10mm thick, finished even and fair on roof slab in cement mortar 1:4, using water proofing compound @ 3% by weight of cement complete all as specified. Note :- (WPC will be measured and paid seperately) |
| 113 | Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per Sqm, blinded with grit or pea size gravel @ 0.006 Cum per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) and APP based polymer membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid and joints overlapping in 10 cm on primed surface by torch application including dismantling existing terfelt, complete all as specified & directed by Engineer-in-Charge. |
| 114 | Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) and APP based polyester non woven fabric (weight not less than 150 gms/sqm) laid and joints overlapping min 10cm on primed surface by torch application applying and uncluding two coats of bituminous based aluminium paint @ 0.20 Kg/sqm over exposed APP sheet with and including removal of existing bituminous felt complete all as specified & directed by Engineer-in-Charge. |
| 115 | 40mm thick brick tiles with including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed. |
| 116 | All as per serial item No 115 herein before but except tiles complete all as directed. |
| 117 | Supply only integral water proofing compound complete all as specified & directed. |
| 118 | Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240. |
| 119 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed complete all as specified and directed. |
| 120 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Nov 02, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender