Tender For Repair To Joinery, Roof Sheeting Etc At Np, Rp & Mes Area At Af Stn Halwara
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
2 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Roof Sheeting Etc At Np, Rp & Mes Area At Af Stn Halwara
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 2 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | M&L for brick works with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for rendering 12mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for preparation of new surface of wall and applying two coats of distemper oil emulsion over a coat of primer above 1mm thick wall care putty on new surfaces, complete all as specified and directed. |
| 6 | M&L for rendering 1st coat of 10 mm thick cement plaster in cement mortar 1:6 above 5mm thick in cement mortar 1:4 as 2nd coat of rendering with water proofing compound, complete all as specified and directed. Note :- WPC will be measured and paid separately. |
| 7 | M&L for prepration of new plastered surfaces of wall and applying two coat of cement base paint over a coats of alkali resistant priming paint including dark blue colour of pillar/RCC/brick facia, complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 9 | M&L for glazed ceramic coloured tiles (Ist quality) 300 x 450mm x 7mm thick on vertical surfaces as in skirting / dado, set and jointed with neat cement slurry and pointed in white /coloured cement to match the shades of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 10 | M&L for non skid jointless cerermic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed. |
| 11 | M&L for non skid jointless cerermic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6 mixed with WPC, complete all as specified and directed. |
| 12 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but not exc 4.0 Sqm each, complete all as specified and directed. |
| 13 | All as per item No 12 above but area not exc 1.5 Sqm each. |
| 14 | M&L for pressed steel frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 15 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, hinges, lock strike plate, hold fast etc, complete all as specified and directed. |
| 16 | M&L for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in hold fast, pressed steel frames and back filling of pressed steel frame, complete all as specified and directed. |
| 17 | S&F 35 mm thick factory made IInd class hard wood plain framed panelled shutters with panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I), kiln seasoned and chemically treated, complete all as specified and directed. |
| 18 | S&F 35 mm thick factory made IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed. |
| 19 | S&F stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with stainless steel staples, complete all as specified and directed. |
| 20 | M&L for prepraration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 21 | M&L for prepraration of old or previously untreated surfaces of wood and applying one coats of synthitic enamel paint, complete all as specified and directed. |
| 22 | Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetand fixing in opening as per specification, complete all as specified and directed. |
| 23 | S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used and fixing in the frame at site, complete all as specified and directed. |
| 24 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed. |
| 25 | M&L 0.63 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. |
| 26 | S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars in 150mm spacing c/c including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately.(ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. |
| 27 | S&F 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 28 | S&F Powder Coating aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 29 | S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 Nos in each door,tower bolt, hinges, anodised aluminium snap beading screws (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 30 | S & F Powder coating aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 31 | Supply and fixing in repair anodised aluminium grill (anodised transparent or dyed to required shade according IS : 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with CP brass stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 32 | S&F 4.8 mm thick sheet glass selected quality plain/ tinted in squares exc 0.5 sqm each pane, complete all as specified and directed. |
| 33 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 34 | M&L 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to frame work, complete all as specified and directed. |
| 35 | S&F factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door / window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 36 | M&L for factory made 18mm thick 100% solid WPC Plain board of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade, calcium carbonate and natural fibres (Wood powders / rice husk / wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650kg/Cum an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000N (face) & 1100N (Edge), Minimum compressive strenth of 50N/sq mm, Modulus of elasticity 850N/Sq mm and resistance of spread of flame of class A category with property of being Termite / Borer free. Water / Moisture proof, fire retardant and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed. |
| 37 | S&F 18/19 mm Block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on one face, complete as specified and directed. |
| 38 | S & F 40 mm flap width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete as specified and directed. |
| 39 | S& F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 40 | Taking down shutter from the frame area exceeding 1 sqm not exceeding 2 sqm each, complete all as specified and directed. |
| 41 | S&F 30 MM thick Flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides with one face covered with lipping/frame to match, complete all as specified and directed. |
| 42 | S&F Floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed. |
| 43 | S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed. |
| 44 | S&F aluminium handles cast type anodised 150mm long, complete all as specified and directed. |
| 45 | S&F 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed. |
| 46 | S&F mild steel 300mm helical door spring, ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed. |
| 47 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with stainless steel staples, complete all as specified and directed. |
| 48 | S&F in repair 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 49 | S&F in repair floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long, complete all as specified and directed. |
| 50 | S&F in repair aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed. |
| 51 | S&F in repair aluminium handles cast type anodised 150mm long, complete all as specified and directed. |
| 52 | S&F in repair 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed. |
| 53 | S&F in repair mild steel 300mm helical door spring, ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed. |
| 54 | M&L for for welding in repair of hinges for fixing door and window as per site requirement, finishing the surafce to match with existing finishes and similar works, complete all as specified and directed. |
| 55 | S&F in repairs harrison rails, anodised aluminium alloy with fixing brackets, stop, rollers etc, complete all as specified and directed. |
| 56 | Dismantling AC/fibre glass translucent /CGI corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and directed. |
| 57 | Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 58 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and as directed. |
| 59 | S & F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 60 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165), complete all as specified and as directed. |
| 61 | S&F Plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes ,without any attachment Fe410-W (Gde-E250 quality A), complete all as specified and directed. |
| 62 | SS&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other , or screw both inds; each, screwed end to be fitted wadhers and one hexagonal or square not, exc 30 cm long (dia of neck in mm exc. 12 n exc 20), complete all as specified and as directed. |
| 63 | S&F of flats iron to support the velly, gutters, wind tie etc including securing bolts or welding all as specified and directed confirming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 64 | M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm width or grith including preparation of new surfaces and one coat of red oxide primer, complete all as specified and directed. |
| 65 | M&L for prepraration of old or previously untreated surfaces of steel and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 66 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, complete all as specified and as directed. |
| 67 | S & F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm, complete all as specified and directed. |
| 68 | M&L for hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI, flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5mm dia, 40mm long, complete all as specified and directed. |
| 69 | S & F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size, complete all as specified and as directed |
| 70 | S&F PVC Wall lining consisting of 5mm thick wood grain printed but single side prelam PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specications, complete all as specified and as directed |
| 71 | M&L for resecuring or Easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm for smooth opening,tightening of hinges, adjustment of tower bolt, sliding bolt etc, complete all as specified and as directed. |
| 72 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 73 | M&L for sheet glass 3mm thick ,ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 74 | S&F figured glass 4 mm thick, pin head / plain type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender