Tender For Repair/Maintenance & Polishing Of Wooden And Steel Furniture And Recanning Including Misc Service At Diat, Milit Girinagar, R&De(E) Dighi & Vrde Ahmednagar Under Ge (I) R&D Girinagar
Tender Value
45 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance & Polishing Of Wooden And Steel Furniture And Recanning Including Misc Service At Diat, Milit Girinagar, R&De(E) Dighi & Vrde Ahmednagar Under Ge (I) R&D Girinagar
BOQ
| Sl. No. | Item Description |
| 1 | FOR GIRINAGAR STN, PUNE - 25 |
| 2 | Removing unserviceable part of timber carefully from existing position and replacement of timber parts made of teak wood (Ist class) all as specified and shown in drawing for the following items of furniture. |
| 3 | (a) CHAIR DINING (Drg No : FD-228, 279 Drg No : FD-16- (M), GF-47) |
| 4 | (i) Front legs as shown on drawing. |
| 5 | (ii) Rear legs as shown on drawing. |
| 6 | (iii) Front rails shown on drawing. |
| 7 | (iv) Rear rails shown on drawing. |
| 8 | (v) Side rails shown on drawing. |
| 9 | (vi) Bottom stiffeners as shown on drawing. |
| 10 | (vii) Canning patti shown on drawing. |
| 11 | (b) CHAIR EASY :- (Drg No : FD-229, 17 DB-3690) |
| 12 | (i) Legs as shown on drawing. |
| 13 | (ii) Arms as shown on drawing. |
| 14 | (iii) Seat side rails as shown on drawing. |
| 15 | (iv) Seat front rails as shown on drawing. |
| 16 | (v) Seat rear rails as shown on drawing. |
| 17 | (vi) Back rest as shown on drawing. |
| 18 | vii) Canning patti shown on drawing. |
| 19 | (c) CHAIR WRITING :- (Drg No : FD-20, 250, 258, 280) |
| 20 | (i) Front legs as shown on drawing. |
| 21 | (i) Rear legs as shown on drawing. |
| 22 | (iii) Front rails as shown on drawing. |
| 23 | (iv) Rear rails as shown on drawing. |
| 24 | (v) Side rails as shown on drawing. |
| 25 | (vi) Stiffeners as shown on drawing. |
| 26 | (vii) Arms as shown on drawing. |
| 27 | (viii) Back supports as shown on drawing. |
| 28 | ix) Canning patti shown on drawing. |
| 29 | (d) CHAIR DINING OFFICERS : (Drg No : FD/MAP-II/04) |
| 30 | (i) Front legs as shown on drawing. |
| 31 | (ii) Rear legs as shown on drawing. |
| 32 | (iii) Front rails shown on drawing. |
| 33 | (iv) Rear rails shown on drawing. |
| 34 | (v) Side rails shown on drawing. |
| 35 | (vi) Bottom stiffeners as shown on drawing. |
| 36 | (vii) Replacing of Cushion of 75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg. |
| 37 | (viii) Replcing of curved teak wood back shall be of section 30x45mm shown on drawing. |
| 38 | (ix) Replcing of teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair shown on drawing. |
| 39 | (e) HAT STAND: (Drg No : FD-233,DB-3978) |
| 40 | (i) Replacement of old defaced mirror S & F new mirror as per drgs. |
| 41 | (ii) Replacement of broken hooks and S&F hooks as per drgs. |
| 42 | (iii) Replacement of old back side as per drgs. |
| 43 | (f) STOOL DRESSING LADIES :- (Drg No : FD-27, Drg No : FD-282, Drg No : FD-252) |
| 44 | (i) Replacing of old unserviceable long rails. |
| 45 | (ii) Replacing of old unserviceable side rails. |
| 46 | (iii) Replacing of old unserviceable legs. |
| 47 | (g) TABLE BED SIDE: - (Drg No : FD-28(M), 248, 276) |
| 48 | (i) Replacing old u/s top of table bed side with Top of table bed side 12mm thick plywood with synmaica including 4mm thick Ist class Teak Wood beeding of edge as shown in drawings |
| 49 | (ii) Replacing old u/s Side planks with 12mm plywood with synmaica |
| 50 | (iii) Replacing old u/s Bottom planks with 12mm plywood |
| 51 | (iv) Replacing old u/s plywood with 6mm commercial plywood of size as shown drawings |
| 52 | (v) Repair and replace old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed. |
| 53 | (vi) Repair and replace old unserviceable legs with existing size and all as specified and directed by Engr-in-charge |
| 54 | (h) TABLE CENTRE:- (Drg No : FD-29(M), 235,274,GF-62) |
| 55 | (i) Replacement of exisiting u/s Top of table center 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge |
| 56 | (ii) Legs of 1st class Teak wood |
| 57 | (iii) Long rail of 1st class Teak wood |
| 58 | (iv) Short rail of 1st class Teak wood |
| 59 | (i) TEAPOY :- (Drg No : FD-278, Drg No : FD-232,Drg No : FD-34,Drg No : FD-35, DB-3975) |
| 60 | (i) Replacement of exisiting u/sTop of Teapoy 18mm thick pre laminated particle board incl 6mm thick 1st class hard wood teak wood beeding of edge including french polish |
| 61 | (ii) Short rail of 1st class hard wood teak wood including french polish. |
| 62 | (iii) Long rail of 1st class hard wood teak wood including french polish. |
| 63 | (iv) Stiffener short rail of 1st class hard wood teak wood including french polish |
| 64 | (v) Leg of 1st class hard wood teak wood including french polish |
| 65 | (j) TABLE PEG :- (Drg No : FD-236, 277, 384, DB-3978) |
| 66 | (i) Replacement of exisiting u/s Top of Peg table with 18mm thick pre laminated particle board incl 4mm thick 1st class hard wood teak wood beeding of edge including french polishing. |
| 67 | (ii) Long rail of 1st class hard wood teak wood including french polishing. |
| 68 | (iii) Short rail of 1st class hard wood teak wood including french polishing |
| 69 | (iv) Leg of 1st class teak wood including french polishing |
| 70 | (k) TABLE DRESSING LADIES :- (Drg No : FD-32, 25) |
| 71 | (i) 5mm thick mirror including plywood all as specified and shown on drawing. |
| 72 | (ii) Drawers all as shown on drawing |
| 73 | (iii) Legs/stiffeners all as shown on drawing |
| 74 | (iv) Top in replacement all as shown on drawing |
| 75 | (v) Back all as shown on drawing |
| 76 | (vi) Bottom all as shown on drawing. |
| 77 | (vii) S&F new Knobs for drawers. |
| 78 | (viii) Mirror frame all as shown on drawing. |
| 79 | (ix) 5.5mm thick sliding glass with aluminium channel of size 12 x 22mm all as shown on drawing |
| 80 | (l) TABLE DRESSING GENTS :- (Drg No : FD-230, Drg No : FD-31) |
| 81 | (i) 5mm thick mirror including plywood all as specified and shown on drawing. |
| 82 | (ii) Drawers all as shown on drawing |
| 83 | (iii) Top all as shown on drawing |
| 84 | (iv) Back all as shown on drawing |
| 85 | (v) Bottom all as shown on drawing. |
| 86 | (vi) Side all as shown on drawing. |
| 87 | (vii) S&F new Knobs for drawers. |
| 88 | (viii) Mirror frame all as shown on drawing. |
| 89 | (m) TABLE WRITING : - (Drg No : FD-33, 249, 275, DB-3982, Drg No : FD-330) |
| 90 | (i) Replacement of old unserviceable top with new top made out of both side prelaminated particle board one side teak face and other side white face 18 mm thick with 4 mm teak wood beeding all as per drgs. |
| 91 | (ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs. |
| 92 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 93 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 94 | (v) Replacement of old unserviceable drawers with new drawers as per drgs. |
| 95 | (vi) Replacement of old shutters of cupboards with new shutters as per drgs. |
| 96 | (vii) Replacement of old side portion of cupboards with new side portions as per drgs. |
| 97 | (viii) Replacement of old back portion of cupboards with new back portions as per drgs. |
| 98 | (ix) Replacement of old long stiffner with new long stiffner as per drgs. |
| 99 | (x) Replacement of old short stiffner with new short stiffner as per drgs. |
| 100 | (n) SOFA 4 SEATER: - (Drg No : FD - 234, 281) |
| 101 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 102 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 103 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 104 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 105 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 106 | (o) SOFA SINGLE SEATER: - (Drg No : GF-39, 55 , 21) |
| 107 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 108 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 109 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 110 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 111 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 112 | (p) SOFA 5 SEATER: - (Drg No : FD - 234, 281, 373) |
| 113 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 114 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 115 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 116 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 117 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 118 | (q) TABLE DINING 6 PERSONS : - (Drg No : FD-239 & Drg No : FD-273)(i) Removing unserviceable table top and S&F new table top, of size 1500x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed. |
| 119 | (ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed. |
| 120 | (iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 121 | (iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 122 | (v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 123 | (r) TABLE DINING 8 PERSONS:- (Drg No : FD-239 & FD-273)(i) Removing unserviceable table top and S&F new table top, of size 1800x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed. |
| 124 | (ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed. |
| 125 | (iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 126 | (iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 127 | (v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 128 | (s) BED HARD :- (Drg No : FD-246, GF -48)(i) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of head board with 4 mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 129 | (ii) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of foot rest with 4mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 130 | (iii) Removing broken long rail from the bed hard and S&F new Second class hardwood long rail of size 1980x90x35 mm as per existing pattern with French polish complete all as specified and as directed. |
| 131 | (iv) Removing broken short rail from the bed hard and S&F for new Second class hardwood long rail of size 900x90x35 mm as per existing pattern and French polished complete all as specified and as directed. |
| 132 | (v) Removing broken legs and S&F for new legs of Second class hardwood of size 600x600x40 mm as per existing pattern and French polished complete all as specified and as directed. |
| 133 | (vi) Removing broken unserviceable head board and S&F new head board as per drawing and French polished complete all as specified and as directed. |
| 134 | (vii) Removing broken unserviceable foot rest and S&F new foot rest as per drawing and French polished complete all as specified and as directed. |
| 135 | (viii) Removing the unserviceable plywood top and S&F with new top of size 1900x850x12 mm commercial plywood ISI marked complete all as specified and as directed. |
| 136 | (ix) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 137 | (t) SIDE BOARD :- (Drg No : FD-241)(i) Replacement of doors with 18 mm pre-laminated particle board interior grade one side with natural teak wood veneer including butt hinges and knobs complete. |
| 138 | (ii) Drawer for table replaced with pre-laminated particle board on one side 18 mm thick with teak wood edging 4 mm thick all as directed. |
| 139 | (iii) Bottom of drawer made out of 6 mm thick plywood commercial and fitted in drawer frame |
| 140 | (iv) Side rail of drawer made out of 1st class hardwood (teak) |
| 141 | (v) Knobs chromium plated 35 mm with bolt and nut |
| 142 | (vi) Back of side board with 6 mm thick plywood commerical as specified in drg. |
| 143 | (vii) Top and two sides of board with 4 mm thick plywood teak finish |
| 144 | (viii) Legs of side board made out of 1st class hardwood (teak). |
| 145 | (u) TABLE 3' X2' WITH DRAWER:- (Drg No : FD-41, FD-224,283)(i) Removing unserviceable table top and S&F new table top of size 3'x2' pre laminated particle board, one side decorated laminated and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as specified and as directed. |
| 146 | (ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of Second class hardwood with French polished complete all as specified and as directed. |
| 147 | (iii) Removing broken drawer and S&F new drawer, sides and rear made with 12 mm thick second class HW planks and front sides made with PB 18 mm thick exterior grade with 18x4 mm teakwood beading all round duly French polished and bottom 6 mm thick, BWR grade plywood and knob/handle all as specified and as directed. |
| 148 | (iv) Replacement of old long stiffner with new long stiffner as per drgs. |
| 149 | (v) Replacement of old short stiffner with new short stiffner as per drgs. |
| 150 | (vi) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 151 | (vii) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 152 | (v) TABLE 3' X2' WITH OUT DRAWER:- (Drg No : FD-42 M, FD-231,239)(i) Removing unserviceable table top and S&F new table top of size 3'x2', pre laminated particle board, one side decorative lamination and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading ar round duly French polished complete all as specified and as directed. |
| 153 | (ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of second class hardwood with French polished complete all as specified and as directed. |
| 154 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 155 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 156 | (v) Replacement of old long stiffner with new long stiffner as per drgs. |
| 157 | (vi) Replacement of old short stiffner with new short stiffner as per drgs. |
| 158 | (w) TABLE DINING 3' X 3' :- (Drg No : FD-88)(i) Replacement of unserviceable top of table dining with 18mm pre lamination particle board including 18x4 mm teak wood beading all round edge of table including french polishing. |
| 159 | (ii) Leg of table dining 3x3 with 1st teak wood including french polish |
| 160 | (iii) Long rail of table dining 3x3 with 1st teak wood including french polish |
| 161 | (iv) Short rail of table dining 3x3 with 1st teak wood including french polish |
| 162 | (v) Stiffner of table dining 3x3 with 1st teak wood including french polish |
| 163 | (vi) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 164 | (x) BOOK CASE : - (Drg No : FD-237, FD-1028)(i) Repair and replace, old unserviceable top with new top, pre-laminated particle board 18 mm thick exterior grade all as specified and directed. |
| 165 | (ii) Repair and replace, old unserviceable side with new side, pre-laminated particle board 18 mm thick teak face all as specified and directed |
| 166 | (iii) Repair and replace, old unserviceable bottom book case with new bottom of prelaminated particle board 18 mm thick all as specified and directed |
| 167 | (iv) Repair and replace, old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed |
| 168 | (v) Repair and replace, old unserviceable back with new back of plywood 6 mm thick commercial quality all as specified and directed |
| 169 | (y) Chair CB Office (Drg No : DB-412, 4124, 4170)(i) Front legs as shown on drawing. |
| 170 | (ii) Rear legs as shown on drawing. |
| 171 | (iii) Front rails as shown on drawing. |
| 172 | (iv) Rear rails as shown on drawing. |
| 173 | (v) Side rails as shown on drawing. |
| 174 | (vi) Stiffeners as shown on drawing. |
| 175 | (vii) Arms as shown on drawing. |
| 176 | (viii) Back supports as shown on drawing. |
| 177 | Removing old cane and recanning any type of chairs (seat or back)(White/Cream Colour) except chair varandah as specified and shown on drg and as directed by Engr-in-Charge. (Drg No : FD-16(M), 228, 279, 20,250,258,280,229,17,252,282,294,DB-3690)) |
| 178 | Chair Varandh (Drg No : FD -19,FD-256,FD-259) (i) Removing old cane, shoes and recaning, replaced shoes after applying one coat of synthetic white enamel paint on frame of chair varandha all as specified shown on drg and as directed by Eng-in-charge |
| 179 | M&L for polishing of following wooden furniture articles with high clean glossy finish MELAMINE polish by Asian Paints, Nerolac and berger approved quality including preparation of the surfaces by putty work and smoothening the surfaces with emery paper as specified . Polish shall be done on all exposed/external surfaces remaining surfaces shall be applied one coat of pink primer, as directed by Engr-in-charge for the following furnitures. |
| 180 | (i) Chair easy (FD-229, 17) |
| 181 | (ii) Chair Dinning (FD-228, 279) |
| 182 | (iii) Chair writing (FD-20, 250, 258, 280) |
| 183 | (iv) Stool dressing CB (FD-27 |
| 184 | (v) Bin-soiled Linen (FD-15 & FD-244) |
| 185 | (vi) Table Centre (FD-29(M), 235,274) |
| 186 | (vii) Table Peg (FD-236, 277, 384,DB-3978) |
| 187 | (viii) Teapoy (FD-278, FD-232,FD-34,FD-35) |
| 188 | (ix) Table dressing Ladies (FD-32, 25) |
| 189 | (x) Table dressing Gents (FD-230 , FD-31) |
| 190 | (xi) Table dining 6 Person (FD-239 & FD-273) |
| 191 | (xii) Table dining 8 Person (FD-239 & FD-273) |
| 192 | (xiii) Sofa set 4 Seater (FD - 234, 281) |
| 193 | (xiv) Sofa set 5 Seater (FD - 234, 281, 373) |
| 194 | (xv) Sofa set 2 Seater (FD - 234, 281, 373) |
| 195 | (xvi) Sofa Single Seater |
| 196 | (xvii) Side board (FD-26, FD-372,241) |
| 197 | (xviii) Table writing FD-33, 249, 275, DB-3982, FD-330) |
| 198 | (xix) Bed Hard (FD-246) |
| 199 | (xx) Hat stand (FD-223) |
| 200 | (xxi) Table bed side (FD-28(M), 248, 276) |
| 201 | (xxii) Book case (FD-237, FD-1028) |
| 202 | (xxiii)Table office clerk (DB-4120) |
| 203 | (xxiv) Table office officer (DB-4119) |
| 204 | (xxv) Chair dining officers (FD/MAP-II/04) |
| 205 | Repairs to Almirah large/medium steel (Drg No : FD-67,1032) |
| 206 | (a) Removing the existing unserviceable old locks fromAlmirah steel supply and fix new lock made out of steel body grade I type of 75 mm size with six brass levers (Make Algrah) and with duplicate keys, all and fixed to the steel Almirah with four screw or as required, complete all as specified and directed by Engineer-in-charge. |
| 207 | (b) Removing exisisting unserviceable handle from steel Almirah, supply & fix new steel chromium plated handle of 150 mm size all as per Godrej pattern and fixed to steel Almirah with hexogonal nut & steel pin of appropriate size complete all as specified and directed by Engineer-in-charge |
| 208 | (c ) Taking out existing shelves of any size carrying out all minor repairs to the shelves, refixing the same to the steel Almirah with providing four Nos of new cleats with nuts&bolts all as specified and directed by Engineer-in-charge |
| 209 | (d) Removing unserviceable pair of foot rest from steel Almirah. S&F of new foot rest made out of 1mm thick mild steel sheet named all as shown on drawing and directed by Engineer-in charge |
| 210 | (e) Removing the dents,bends of steel Almirah welding to broken portion, rectifying all minor defects and repairs. M&L for preparation of steel surface of almirah (inside and out side) including doors shelves and legs. Providing high class glossy finish with synthetic enamel paint over a coat of red oxide premier whereever required. All complete as directed:- |
| 211 | (i) For Almirah large steel |
| 212 | (ii) For Almirah med steel |
| 213 | (iii) For Tepoy Varandha |
| 214 | (iv) Table D man (FD 1016) |
| 215 | (v) Chair CB With arm Tubluer steel |
| 216 | Charpoy GI :- (Drg No : FD-220, FD-386)i) Removing the existing unserviceabe plywood,tightening all the check nuts, elbow, long rails shorts and legs to hold the charpoy tight and supply and fixing commercial plywood 12mm thick having on all the sides of plywood with 1 st class teakood beading of size 12mm x 6mm applying french polishing to lipping including fixing to the MS square tube with appropriate machine screws (12 Nos) duly approved complete all as specified and as directed. . Make ( Green ply / duston with ISI Mark ) Drg No FD-220 & FD-386 |
| 217 | (ii) Taking out existing unserviceable GI pipe elbow from GI pipe charpoy and S&F new GI elbow 32 mm bore with ISI mark, three way, medium grade, approved quality complete all as specified and directed. |
| 218 | (iii) Taking out existing unserviceable GI check nut from GI charpoy and S&F new 32 mm GI check nut complete all as specified and as directed. |
| 219 | (iv) Taking down existing unserviceable GI Pipe long rail 32 mm bore from GI pipe charpoy and refixing the same after cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed. |
| 220 | (v) Taking down existing unserviceable GI Pipe short rail 32 mm bore from GI pipe charpoy, cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed. |
| 221 | Chair CB Steel (Drg No : FD- 75M)(a) M&L for removing US hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed |
| 222 | (b) M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :- |
| 223 | (i) Seat of chair CB steel with arms |
| 224 | (ii) Back of chair CB steel with arms |
| 225 | (c) M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following |
| 226 | (i) Seat of chair CB steel W/O arms |
| 227 | (ii) Back of chair CB steel W/O arms |
| 228 | Charpoy Foulding IP With nylon newar TPi) Revoving existing unserviceable ply wood top or newar from the charpoy foulding and supplying and fixing new 8mm thick plywood ISI marked commercial fixing with screw including thickness of ply at equal distance to GI pipe fram of charpoy and fixing the plywood top with MS machine made screw bolt with counter sunk head at one end and other end screwed with washers and one hexagonal nut of 75 mm long dia of neck 5mm and need welding to be repair applying two coats of synthetic enamel paint to stiffeners after one coat of paint primer complete as directed by Eng -in - charge |
| 229 | Revolving chair TP |
| 230 | (i) Replacing old damaged base platform with new base platform made of hard PVC with castor nylon wheels of good quality to suit the existing size and design of chair revolving low high and medium backs(trade pattern) complete all as specified and Directed by Engr In Charge |
| 231 | (ii) Replacing and damaged hand rest of chair revolving High back(Trade pattern) with new hand rest made of polyurethane material to suit the existing size and design complete all as specified and directed |
| 232 | iii)Replacing old damaged and unserviceable assembly bolt with new hydrolic system assembly approved quality to suit the existing size and design of chair revolving low,high and medium backs(Trade Pattern) complete all as specified and directed. (TP) |
| 233 | iv)Replacing old damaged and unserviceable assembly tiling bolt with new tiling service assembly approved quality to suit the existing size and design of chair revolving low,high and medium backs(Trade Pattern) complete all as specified and directed. |
| 234 | v)Removal of old and unserviceable fabric/rexene and foam from the seat and back of chair and replacing with new approved quality fabric/rexene (cost not less than Rs 250/metre) and foam as per existing size quality) and design for chair revolving high back(trade Pattern) complete all as specified and directed |
| 235 | Teapoy Varandha :- (Drg No : FD-35,255)(i) Top of Teapoy Varandha 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge |
| 236 | Namaste Furniture 4 Seater, 3 Seater, Two Seater to be grouting including 8'' x 12mm nut & bolt , Hand with PCC, Cement, concrete as per directed by Eng- in- charge (TP) |
| 237 | FOR R&DE(ENGRS), DIGHI, PUNE - 15 |
| 238 | Removing unserviceable part of timber carefully from existing position and replacement of timber parts made of teak wood (Ist class) all as specified and shown in drawing for the following items of furniture. |
| 239 | (a) CHAIR DINING :- (Drg No : FD-228, 279 FD-16- (M), GF-47 FD/E6/MAP/05) |
| 240 | (i) Front legs as shown on drawing. |
| 241 | (ii) Rear legs as shown on drawing. |
| 242 | (iii) Front rails shown on drawing. |
| 243 | (iv) Rear rails shown on drawing. |
| 244 | (v) Side rails shown on drawing. |
| 245 | (vi) Bottom stiffeners as shown on drawing. |
| 246 | (vii) Canning patti shown on drawing. |
| 247 | (viii) M&L for removing UNSV seat of dining chair in one piece made out of PVC and S&F with suitable nut bolt/screw to the existing PVC seat in one piece (Make- Supreme/Cello/Polyester or Blowplast and as directed. (FD/E6/MAP/05) |
| 248 | (b) CHAIR EASY :- (Drg No : FD-229, 17 DB-3690) |
| 249 | (i) Legs as shown on drawing. |
| 250 | (ii) Arms as shown on drawing. |
| 251 | (iii) Seat side rails as shown on drawing. |
| 252 | (iv) Seat front rails as shown on drawing. |
| 253 | (v) Seat rear rails as shown on drawing. |
| 254 | (vi) Back rest as shown on drawing. |
| 255 | (vii) Canning patti shown on drawing. |
| 256 | (c) CHAIR WRITING :- (Drg No : FD-20, 250, 258, 280) |
| 257 | (i) Front legs as shown on drawing. |
| 258 | (ii) Rear legs as shown on drawing. |
| 259 | (iii) Front rails as shown on drawing. |
| 260 | (iv) Rear rails as shown on drawing. |
| 261 | (v) Side rails as shown on drawing. |
| 262 | (vi) Stiffeners as shown on drawing. |
| 263 | (vii) Arms as shown on drawing. |
| 264 | (viii) Back supports as shown on drawing. |
| 265 | ix) Canning patti shown on drawing. |
| 266 | (d) REPAIRS TO HAT STAND (Drg No : FD-233,DB-3978) |
| 267 | (i) Replacement of old defaced mirror S & F new mirror as per drgs. |
| 268 | (ii) Replacement of broken hooks and S&F hooks as per drgs. |
| 269 | (iii) Replacement of old back side as per drgs. |
| 270 | (e) REPAIRS TO STOOL DRESSING LADIES :- (Drg No : FD-27, FD-282, FD-252) |
| 271 | (i) Replacing of old unserviceable long rails. |
| 272 | (ii) Replacing of old unserviceable side rails. |
| 273 | (iii) Replacing of old unserviceable legs. |
| 274 | (f) TABLE BED SIDE (Drg No : FD-28(M), 248, 276) |
| 275 | (i) Replacing old u/s top of table bed side with Top of table bed side 12mm thick plywood with synmaica including 4mm thick Ist class Teak Wood beeding of edge as shown in drawings |
| 276 | (ii) Replacing old u/s Side planks with 12mm plywood with synmaica |
| 277 | (iii) Replacing old u/s Bottom planks with 12mm plywood |
| 278 | (iv) Replacing old u/s plywood with 6mm commercial plywood of size as shown drawings |
| 279 | (v) Repair and replace old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed. |
| 280 | (vi) Repair and replace old unserviceable legs with existing size and all as specified and directed by Engr-in-charge |
| 281 | (vii) M&L for removing UNSV prelaminated particle board top 18mm thick openable and S&F with suitable hinged & screw on right side to 25mm mild steel pipe inserted in 20mm dia rod welded to frame. (FD-E6/MAP/15) |
| 282 | (g) TABLE CENTER (Drg No : FD-29(M), 235,274,GF-62) |
| 283 | (i) Top of table center 18mm thick pre laminated MDF board of colour and finish as approved by GE including 4mm thick Ist class HW beeding of edge |
| 284 | (ii) Legs of 1st class Teak wood |
| 285 | (iii) Long rail of 1st class Teak wood |
| 286 | (iv) Short rail of 1st class Teak wood |
| 287 | (h) TEAPOY :- (Drg No : FD-278, FD-232,FD-34,FD-35, DB-3975) |
| 288 | (i) Top of Teapoy 18mm thick pre laminated MDF board of colour and finish as approved by GE incl 6mm thick 1st class hard wood teak wood beeding of edge including french polish |
| 289 | (ii) Short rail of 1st class hard wood teak wood including french polish. |
| 290 | (iii) Long rail of 1st class hard wood teak wood including french polish. |
| 291 | (iv) Stiffener short rail of 1st class hard wood teak wood including french polish |
| 292 | (v) Leg of 1st class hard wood teak wood including french polish |
| 293 | (i) TABLE PEG :- (Drg No : FD-236, 277, 384, DB-3978) |
| 294 | (i) Replacement of exisiting u/s Top of Peg table with 18mm thick pre laminated particle board incl 4mm thick 1st class hard wood teak wood beeding of edge including french polishing. |
| 295 | (ii) Long rail of 1st class hard wood teak wood including french polishing. |
| 296 | (iii) Short rail of 1st class hard wood teak wood including french polishing |
| 297 | (iv) Leg of 1st class teak wood including french polishing |
| 298 | (j) TABLE DRESSING LADIES :- (Drg No : FD-32, 25) |
| 299 | (i) 5mm thick mirror including plywood all as specified and shown on drawing. |
| 300 | (ii) Drawers all as shown on drawing |
| 301 | (iii) Legs/stiffeners all as shown on drawing |
| 302 | (iv) Top all as shown on drawing |
| 303 | (v) Back all as shown on drawing |
| 304 | (vi) Bottom all as shown on drawing. |
| 305 | (vii) S&F new Knobs for drawers. |
| 306 | (viii) Mirror frame all as shown on drawing. |
| 307 | (ix) 5.5mm thick sliding glass with aluminium channel of size 12 x 22mm all as shown on drawing. |
| 308 | (k) TABLE DRESSING GENTS :- (Drg No : FD-230, FD-31) |
| 309 | (i) 5mm thick mirror including plywood all as specified and shown on drawing. |
| 310 | (ii) Drawers all as shown on drawing |
| 311 | (iii) Top all as shown on drawing |
| 312 | (iv) Back all as shown on drawing |
| 313 | (v) Bottom all as shown on drawing. |
| 314 | (vi) Side all as shown on drawing. |
| 315 | (vii) S&F new Knobs for drawers. |
| 316 | (viii) Mirror frame all as shown on drawing. |
| 317 | (l) TABLE WRITING (Drg No : FD-33, 249, 275, DB-3982, FD-330) |
| 318 | (i) Replacement of old unserviceable top with new top made out of both side prelaminated MDF board of colour and finish as approved by GE, 18 mm thick with 4 mm teak wood beeding all as per drgs. |
| 319 | (ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs. |
| 320 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 321 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 322 | (v) Replacement of old unserviceable drawers with new drawers as per drgs. |
| 323 | (vi) Replacement of old shutters of cupboards with new shutters as per drgs. |
| 324 | (vii) Replacement of old side portion of cupboards with new side portions as per drgs. |
| 325 | (viii) Replacement of old back portion of cupboards with new back portions as per drgs. |
| 326 | (ix) Replacement of old long stiffner with new long stiffner as per drgs. |
| 327 | (x) Replacement of old short stiffner with new short stiffner as per drgs. |
| 328 | (m) Sofa 4 Seater (Drg No : FD - 234, 281) |
| 329 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 330 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 331 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 332 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 333 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 334 | (n) Sofa Single Seater (Drg No : GF-39, 55 , 21) |
| 335 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 336 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 337 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 338 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 339 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 340 | (o) Sofa 5 Seater (Drg No : FD - 234, 281, 373) |
| 341 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 342 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 343 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 344 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 345 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 346 | (p) Repairs to table dining 6 persons (Drg No : FD-239 & FD-273)(i) Removing unserviceable table top and S&F new table top, of size 1500x900 mm pre laminated MDF board of colour and finish as approved by GE, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly Melamyne polished complete all as per existing complete all as specified and as directed. |
| 347 | (ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed. |
| 348 | (iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 349 | (iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 350 | (v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 351 | (q) Repairs to table dining 8 persons (Drg No : FD-239 & FD-273)(i) Removing unserviceable table top and S&F new table top, of size 1800x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed. |
| 352 | (ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed. |
| 353 | (iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 354 | (iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 355 | (v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 356 | (r) Bed hard: (Drg No : FD-246, GF -48)(i) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of head board with 4 mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 357 | (ii) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of foot rest with 4mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 358 | (iii) Removing broken long rail from the bed hard and S&F new Second class hardwood long rail of size 1980x90x35 mm as per existing pattern with French polish complete all as specified and as directed. |
| 359 | (iv) Removing broken short rail from the bed hard and S&F for new Second class hardwood long rail of size 900x90x35 mm as per existing pattern and French polished complete all as specified and as directed. |
| 360 | (v) Removing broken legs and S&F for new legs of Second class hardwood of size 600x600x40 mm as per existing pattern and French polished complete all as specified and as directed. |
| 361 | (vi) Removing broken unserviceable head board and S&F new head board as per drawing and French polished complete all as specified and as directed. |
| 362 | (vii) Removing broken unserviceable foot rest and S&F new foot rest as per drawing and French polished complete all as specified and as directed. |
| 363 | (viii) Removing the unserviceable plywood top and S&F with new top of size 1900x850x12 mm commercial plywood ISI marked complete all as specified and as directed. |
| 364 | (ix) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 365 | (s) Side board: (Drg No : FD-241)(i) Replacement of doors with 18 mm pre-laminated particle board interior grade one side with natural teak wood veneer including butt hinges and knobs complete. |
| 366 | (ii) Drawer for table replaced with pre-laminated particle board on one side 18 mm thick with teak wood edging 4 mm thick all as directed. |
| 367 | (iii) Bottom of drawer made out of 6 mm thick plywood commercial and fitted in drawer frame |
| 368 | (iv) Side rail of drawer made out of 1st class hardwood (teak) |
| 369 | (v) Knobs chromium plated 35 mm with bolt and nut |
| 370 | (vi) Back of side board with 6 mm thick plywood commerical as specified in drg. |
| 371 | (vii) Top and two sides of board with 4 mm thick plywood teak finish |
| 372 | (viii) Legs of side board made out of 1st class hardwood (teak). |
| 373 | (t) Repairs to table 3'x2' with drawer : (Drg No : FD-41, FD-224,283)(i) Removing unserviceable table top and S&F new table top of size 3'x2' pre laminated particle board, one side decorated laminated and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as specified and as directed. |
| 374 | (ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of Second class hardwood with French polished complete all as specified and as directed. |
| 375 | (iii) Removing broken drawer and S&F new drawer, sides and rear made with 12 mm thick second class HW planks and front sides made with PB 18 mm thick exterior grade with 18x4 mm teakwood beading all round duly French polished and bottom 6 mm thick, BWR grade plywood and knob/handle all as specified and as directed. |
| 376 | (iv) Replacement of old long stiffner with new long stiffner as per drgs. |
| 377 | (v) Replacement of old short stiffner with new short stiffner as per drgs. |
| 378 | (vi) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 379 | (vii) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 380 | (u) Repairs to Table, 3'x2'without drawer (Drg No : FD-42 M, FD-231,239)(i) Removing unserviceable table top and S&F new table top of size 3'x2', pre laminated particle board, one side decorative lamination and other side plain, 18 mm thick, interior grade with 18x4 mm teak wood beading ar round duly French polished complete all as specified and as directed. |
| 381 | (ii) Removing broken legs and S&F new legs of size 740 mm long, 60 mm at top and 40 mm at bottom of second class hardwood with French polished complete all as specified and as directed. |
| 382 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 383 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 384 | (v) Replacement of old long stiffner with new long stiffner as per drgs. |
| 385 | (vi) Replacement of old short stiffner with new short stiffner as per drgs. |
| 386 | (v) Repairs to Table office clerk/ Officers steel:- (Drg No : FD-84, 1003)(i) Removing unserviceable drawers complete made out of 1mm thick MS sheet and of the shape as shown on drawing as well as to match with the existing drawers and to suit ion the existing place of the worn out drawers complete all as shown on drawing specified and directed |
| 387 | (ii) Taking out the existing unserviceable locks to the drawer and fixing new locks as all specified and directed by Engineer-in- charge |
| 388 | (iii) Taking out worn out following components without damaging the existing components, supply the new components made out of 25mm square 16 guage MS Tubing and fixing the same by welding to the table in place of removed components. (i)Legs (ii)LongSiffners (iii)Stiffners short |
| 389 | (iv) Removing the dents/bends and carrying out the minor repairs, complete of the drawers to have smooth movement. M&L for preparation of steel surface of table providing high class glossy finish with synthetic enamel paint over a coat of red oxide primer where ever required inside and outside of table and providing PVC shoes to the legs. |
| 390 | (w) BOOK CASE : The following repairs shall be carried out to Book case after removing old unserviceable parts under Drg No. FD-237, FD-1028 (i) Repair and replace, old unserviceable top with new top, pre-laminated particle board 18 mm thick exterior grade all as specified and directed. |
| 391 | (ii) Repair and replace, old unserviceable side with new side, pre-laminated particle board 18 mm thick teak face all as specified and directed |
| 392 | (iii) Repair and replace, old unserviceable bottom book case with new bottom of prelaminated particle board 18 mm thick all as specified and directed |
| 393 | (iv) Repair and replace, old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed |
| 394 | (v) Repair and replace, old unserviceable back with new back of plywood 6 mm thick commercial quality all as specified and directed |
| 395 | Removing old cane and recanning any type of chairs (seat or back)(White/Cream Colour) except chair varandah as specified and shown on drg and as directed by Engr-in-Charge. (FD-16(M), 228, 279, 20, 250, 258, 280, 229, 17,252,282, 244) |
| 396 | Chair Varandah (i) Removing old cane and recaning after applying one coat of synthetic white enamel paint on frame of chair varandha all as specified shown on drg and as directed by Eng-in-charge (Drg No : FD -19,FD-256,FD-259) |
| 397 | M&L for polishing of following wooden furniture articles with high clean glossy finish MELAMINE polish by Asian Paints, Nerolac and berger approved quality including preparation of the surfaces by putty work and smoothening the surfaces with emery paper as specified . Polish shall be done on all exposed/external surfaces remaining surfaces shall be applied one coat of pink primer, as directed by Engr-in-charge for the following furnitures. |
| 398 | (i) Chair easy (FD-229, 17) |
| 399 | (ii) Chair Dining (FD-228, 279) |
| 400 | (iii) Chair writing (FD-20, 250, 258, 280) |
| 401 | (iv) Stool dressing CB (FD-27) |
| 402 | (v) Bin-soiled Linen FD-15 & FD-244 |
| 403 | (vi) Table Centre (FD-29(M), 235,274) |
| 404 | (vii) Table Peg (FD-236, 277, 384 DB-3978) |
| 405 | (viii) Teapoy (FD-278,FD-232,FD-34,FD-35,DB-3975) |
| 406 | (ix) Table dressing Ladies (FD-32, 25) |
| 407 | (x) Table dressing Gents (FD-230 , FD-31) |
| 408 | (xi) Table dining 6 Person (FD-239 & FD-273) |
| 409 | (xii) Table dining 8 Person (FD-239 & FD-273) |
| 410 | (xiii) Sofa set 4 Seater (FD - 234, 281) |
| 411 | (xiv) Sofa set 5 Seater (FD - 234, 281, 373) |
| 412 | (xv) Sofa single Seater (FD - 234, 281, 373) |
| 413 | (xvi) Side board (FD-26, FD-372,241) |
| 414 | (xvii) Table writing (FD-33, 249, 275, DB-3982, FD-330) |
| 415 | (xviii) Bed Hard (FD-246) |
| 416 | (xix) Hat stand (FD-223) |
| 417 | Repairs to Almirah large/medium steel (Drg No : FD-67,1032) |
| 418 | (a) Removing the existing unserviceable old locks from Almirah steel supply and fix new lock made out of steel body grade I type of 75 mm size with six brass levers (Make Algrah) and with duplicate keys, all and fixed to the steel Almirah with four screw or as required, complete all as specified and directed by Engineer-in-charge. |
| 419 | (b) Removing exisisting unserviceable handle from steel Almirah, supply & fix new steel chromium plated handle of 150 mm size all as per Godrej pattern and fixed to steel Almirah with hexogonal nut & steel pin of appropriate size complete all as specified and directed by Engineer-in-charge |
| 420 | (c) Taking out existing shelves of any size carrying out all minor repairs to the shelves, refixing the same to the steel Almirah with providing four Nos of new cleats with nuts&bolts all as specified and directed by Engineer-in-charge |
| 421 | (d) Removing unserviceable pair of foot rest from steel Almirah. S&F of new foot rest made out of 1mm thick mild steel sheet named all as shown on drawing and directed by Engineer-in charge |
| 422 | (e) Removing the dents,bends of steel Almirah welding to broken portion, rectifying all minor defects and repairs. M&L for preparation of steel surface of almirah (inside and out side) including doors shelves and legs. Providing high class glossy finish with one coat of etc. synthetic enamel paint complete as directed:- |
| 423 | (i) For Almirah large steel |
| 424 | (ii) For Almirah med steel |
| 425 | (iii) For Tepoy Varandha |
| 426 | (iv) Table clk steel |
| 427 | (v) Chair CB With arm Tubluer steel |
| 428 | (vi) Charpoy IP hard Top (FD/E6/MAP/11/01) |
| 429 | Charpoy GI :- (Drg No : FD-220, FD-386, FD/E6/MAP/11/01)Removing the existing unserviceabe Plywood,tightening all the check nuts, elbow, long rails shorts and legs to hold the charpoy tight and to weld 4 nos MS cleats of size 25mm x6mm (2 Each at equal distance at both side of long rail) and to fix 02 nos MS square tube on cleats at equal distance 25 mm x25mm x 1.6 mm thick to support the ply and supply and supply and fixing commercial plywood 12mm thick BWR having on all the sides of plywood with 1 st class teakood beading of size 12mm x 6mm applying french polishing to lipping including fixing to the MS square tube with appropriate machine screws (12 Nos) duly approved complete all as specified and as directed. . Make ( Green ply / duston with ISI Mark ) The MS Square tube be welded and to be painted with one coat of primer and one coat of primer and one coat of SE paint after completly removing / chipping off the welding scales. ( MS square tube should be fixed on MS cleats apprpriatly drilling holes on both be fixed with machine screw and plywood should be fixed with MS clams Drg No FD-220 & FD-386 |
| 430 | (ii) Taking out existing unserviceable GI pipe elbow from GI pipe charpoy and S&F new GI elbow 32 mm bore with ISI mark, three way, medium grade, approved quality complete all as specified and directed. |
| 431 | (iii) Taking out existing unserviceable GI check nut from GI charpoy and S&F new 32 mm GI check nut complete all as specified and as directed. |
| 432 | (iv) Taking down existing unserviceable GI Pipe long rail 32 mm bore from GI pipe charpoy and refixing the same after cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed. |
| 433 | (v) Taking down existing unserviceable GI Pipe short rail 32 mm bore from GI pipe charpoy, cutting, threading suitable and fixing with existing old serviceable elbow complete all as specified and as directed. |
| 434 | Chair CB Steel :- (FD- 75M)(a) M&L for removing US hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed |
| 435 | (b) M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :- |
| 436 | (i) Seat of chair CB steel with arms (FD- 75M) |
| 437 | (ii) Back of chair CB steel with arms (FD- 75M) |
| 438 | (c) M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :- |
| 439 | (i) Seat of chair CB steel W/O arms (FD-75M) |
| 440 | (ii) Back of chair CB steel W/O arms (FD-75M) |
| 441 | Teapoy Varandha :- (FD-35,255)Top of Teapoy Varandha 18mm thick pre laminated MDF board including 4mm thick Ist class HW beeding of edge |
| 442 | FOR VRDE AHMEDNAGAR, ARANGAON |
| 443 | Removing unserviceable part of timber carefully from existing position and replacement of timber parts made of teak wood (Ist class) all as specified and shown in drawing for the following items of furniture. |
| 444 | (a) CHAIR DINING :- (Drg No : FD-228, 279 FD-16- (M), GF-47) |
| 445 | (i) Front legs as shown on drawing. |
| 446 | (ii) Rear legs as shown on drawing. |
| 447 | (iii) Front rails shown on drawing. |
| 448 | (iv) Rear rails shown on drawing. |
| 449 | (v) Side rails shown on drawing. |
| 450 | (vi) Bottom stiffeners as shown on drawing. |
| 451 | (vii) M&L for removing UNSV seat of dining chair in one piece made out of PVC and S&F with suitable nut bolt/screw to the existing PVC seat in one piece (Make- Supreme/Cello/Polyester or Blowplast and as directed. |
| 452 | (viii) Canning patti shown on drawing. |
| 453 | (b) CHAIR EASY :- (Drg No : FD-229, 17 DB-3690) |
| 454 | (i) Legs as shown on drawing. |
| 455 | (ii) Arms as shown on drawing. |
| 456 | (iii) Seat side rails as shown on drawing. |
| 457 | (iv) Seat front rails as shown on drawing. |
| 458 | (v) Seat rear rails as shown on drawing. |
| 459 | (vi) Back rest as shown on drawing. |
| 460 | vii) Canning patti shown on drawing. |
| 461 | (c) CHAIR WRITING :- (Drg No : FD-20, 250, 258, 280) |
| 462 | (i) Front legs as shown on drawing. |
| 463 | (i) Rear legs as shown on drawing. |
| 464 | (iii) Front rails as shown on drawing. |
| 465 | (iv) Rear rails as shown on drawing. |
| 466 | (v) Side rails as shown on drawing. |
| 467 | (vi) Stiffeners as shown on drawing. |
| 468 | (vii) Arms as shown on drawing. |
| 469 | (viii) Back supports as shown on drawing. |
| 470 | ix) Canning patti shown on drawing. |
| 471 | (d) STOOL DRESSING LADIES :- (Drg No : FD-27, FD-282, FD-252) |
| 472 | (i) Replacing of old unserviceable long rails. |
| 473 | (ii) Replacing of old unserviceable side rails. |
| 474 | (iii) Replacing of old unserviceable legs. |
| 475 | (e) TABLE BED SIDE: - (Drg No : FD-28(M), 248, 276) |
| 476 | (i) Replacing old u/s top of table bed side with Top of table bed side 12mm thick plywood with synmaica including 4mm thick Ist class Teak Wood beeding of edge as shown in drawings |
| 477 | (ii) Replacing old u/s Side planks with 12mm plywood with synmaica |
| 478 | (iii) Replacing old u/s Bottom planks with 12mm plywood |
| 479 | (iv) Replacing old u/s plywood with 6mm commercial plywood of size as shown drawings |
| 480 | (v) Repair and replace old unserviceable shelf with new shelf, pre-laminated particle board 18 mm thick all as specified and directed. |
| 481 | (vi) Repair and replace old unserviceable legs with existing size and all as specified and directed by Engr-in-charge |
| 482 | (f) TABLE PEG :- (Drg No : FD-236, 277, 384, DB-3978) |
| 483 | (i) Replacement of exisiting u/s Top of Peg table with 18mm thick pre laminated particle board incl 4mm thick 1st class hard wood teak wood beeding of edge including french polishing. |
| 484 | (ii) Long rail of 1st class hard wood teak wood including french polishing. |
| 485 | (iii) Short rail of 1st class hard wood teak wood including french polishing |
| 486 | (iv) Leg of 1st class teak wood including french polishing |
| 487 | (g) TABLE CENTRE:- (Drg No : FD-29(M), 235,274 GF-62) |
| 488 | (i) Replacement of exisiting u/s Top of table center 18mm thick pre laminated particle board including 4mm thick Ist class HW beeding of edge |
| 489 | (ii) Legs of 1st class Teak wood |
| 490 | (iii) Long rail of 1st class Teak wood |
| 491 | (iv) Short rail of 1st class Teak wood |
| 492 | (h) TEAPOY :- (Drg No : FD-278, FD-232,FD-34,FD-35, DB-3975) |
| 493 | (i) Replacement of exisiting u/sTop of Teapoy 18mm thick pre laminated particle board incl 6mm thick 1st class hard wood teak wood beeding of edge including french polish |
| 494 | (ii) Short rail of 1st class hard wood teak wood including french polish. |
| 495 | (iii) Long rail of 1st class hard wood teak wood including french polish. |
| 496 | (iv) Stiffener short rail of 1st class hard wood teak wood including french polish |
| 497 | (v) Leg of 1st class hard wood teak wood including french polish |
| 498 | (i) TABLE DRESSING LADIES :- (Drg No : FD-32, 25) |
| 499 | (i) 5mm thick mirror including plywood all as specified and shown on drawing. |
| 500 | (ii) Drawers all as shown on drawing |
| 501 | (iii) Legs/stiffeners all as shown on drawing |
| 502 | (iv) Top in replacement all as shown on drawing |
| 503 | (v) Back all as shown on drawing |
| 504 | (vi) Bottom all as shown on drawing. |
| 505 | (vii) S&F new Knobs for drawers. |
| 506 | (viii) Mirror frame all as shown on drawing. |
| 507 | (ix) 5.5mm thick sliding glass with aluminium channel of size 12 x 22mm all as shown on drawing |
| 508 | (j) TABLE WRITING : - (Drg No : FD-33, 249, 275, DB-3982, FD-330) |
| 509 | (i) Replacement of old unserviceable top with new top made out of both side prelaminated particle board one side teak face and other side white face 18 mm thick with 4 mm teak wood beeding all as per drgs. |
| 510 | (ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs. |
| 511 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 512 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 513 | (v) Replacement of old unserviceable drawers with new drawers as per drgs. |
| 514 | (vi) Replacement of old shutters of cupboards with new shutters as per drgs. |
| 515 | (vii) Replacement of old side portion of cupboards with new side portions as per drgs. |
| 516 | (viii) Replacement of old back portion of cupboards with new back portions as per drgs. |
| 517 | (ix) Replacement of old long stiffner with new long stiffner as per drgs. |
| 518 | (x) Replacement of old short stiffner with new short stiffner as per drgs. |
| 519 | (k) SOFA 5 SEATER: - (Drg No : FD - 234, 281, 373) |
| 520 | (i) M&L for replacement of un-serviceable cushion with new U Foam cushion 100 mm thick 40 density. Make: Sleepwell/Kurlon covered with tapestry cloth all as per drg. The tapestry cloth shall be of high quality about Rs. 150 per meter and as approved by Garrison Engineer. |
| 521 | (ii) M&L for replacement of old unservicaeble arms made out of teak wood and French polished as per drg complete all as specified and directed. |
| 522 | (iii) Replacement of old unservicaeble front legs of sofa set made out of teak woood and French polished as per drgs complete all as specified and directed |
| 523 | (iv) Replacement of old unservicaeble rear legs of sofa set made out of teak wood and French polished as per drg complete all as specified and directed. |
| 524 | (v) M&L for replacement of old unservicaeble batten teak wood with new teak wood, duly French polished to the seat/back of sofa set as per drawings complete all as specified and directed. |
| 525 | (l) TABLE DINING 6 PERSONS : - (Drg No : FD-239 & FD-273)(i) Removing unserviceable table top and S&F new table top, of size 1500x900 mm pre laminated particle board with one side decorative laminated and another side plain white, 18 mm thick, interior grade with 18x4 mm teak wood beading all round duly French polished complete all as per existing complete all as specified and as directed. |
| 526 | (ii) Removing unserviceable legs and S&F new legs of size 60x60x750 mm made of second class hardwood as per existing pattern duly French polished complete all as specified and as directed. |
| 527 | (iii) Removing unserviceable short side rails of table and S&F new short side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 528 | (iv) Removing unserviceable long side rails of table and S&F new long side rails, as per existing pattern of Second class hardwood duly French polished complete all as specified and as directed. |
| 529 | (v) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 530 | (m) BED HARD :- (Drg No : FD-246, GF -48)(i) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of head board with 4 mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 531 | (ii) Removing unserviceable plywood and S&F new 3 mm thick plywood one side teak veneered on both sides of foot rest with 4mm thick half round teak wood beading as per existing and polished with French polish complete all as specified and as directed. |
| 532 | (iii) Removing broken long rail from the bed hard and S&F new Second class hardwood long rail of size 1980x90x35 mm as per existing pattern with French polish complete all as specified and as directed. |
| 533 | (iv) Removing broken short rail from the bed hard and S&F for new Second class hardwood long rail of size 900x90x35 mm as per existing pattern and French polished complete all as specified and as directed. |
| 534 | (v) Removing broken legs and S&F for new legs of Second class hardwood of size 600x600x40 mm as per existing pattern and French polished complete all as specified and as directed. |
| 535 | (vi) Removing broken unserviceable head board and S&F new head board as per drawing and French polished complete all as specified and as directed. |
| 536 | (vii) Removing broken unserviceable foot rest and S&F new foot rest as per drawing and French polished complete all as specified and as directed. |
| 537 | (viii) Removing the unserviceable plywood top and S&F with new top of size 1900x850x12 mm commercial plywood ISI marked complete all as specified and as directed. |
| 538 | (ix) Removing broken corner bracket and S&F new corner bracket of triangular shape of size 100x100x25 mm made of Second class hardwood complete duly French polished complete all as specified and as directed. |
| 539 | Removing old cane and recanning any type of chairs (seat or back)(White/Cream Colour) except chair varandah as specified and shown on drg and as directed by Engr-in-Charge. (Drg No : FD-16(M), 228, 279, 20, 250, 258, 280, 229, 17,252,282, 244, DB-3690) |
| 540 | Chair Varandh (i) Removing old cane, shoes and recaning, replaced shoes after applying one coat of synthetic white enamel paint on frame of chair varandha all as specified shown on drg and as directed by Eng-in-charge (Drg No : FD -19,FD-256,FD-259) |
| 541 | M&L for scraping the existing polished and smoothen surface with sand paper of grades 2 to 9, filling up the crevices and holes with proper readymade filler or paste of raw sienna in sufficient quantity to obtain desired colour to match the colour of wood works. After preparation of surface applying one coat of wood primer and when the surfaces dries up then applying two coats of French polished, as directed by Engr-in-charge for the following furnitures. |
| 542 | (i) Chair easy (FD-229, 17) |
| 543 | (ii) Chair Dinning (FD-228, 279) |
| 544 | (iii) Chair writing (FD-20, 250, 258, 280) |
| 545 | (v) Bin-soiled Linen (FD-15 & FD-244) |
| 546 | (vii) Table Peg (FD-236, 277, 384 DB-3978) |
| 547 | (xi) Table dining 6 Person (FD-239 & FD-273) |
| 548 | (xiv) Sofa set 5 Seater (FD - 234, 281, 373) |
| 549 | (xvii) Side board (FD-26, FD-372,241) |
| 550 | (xviii) Table writing (FD-33, 249, 275, DB-3982, FD-330) |
| 551 | (xix) Bed Hard (FD-246) |
| 552 | (xx) Hat stand (FD-223) |
| 553 | (xxi) Table bed side (FD-28(M), 248, 276) |
| 554 | (xxii) Book case (FD-237, FD-1028) |
| 555 | (xxvi) Chair CB office (DB-4124,DB-4170) |
| 556 | (xxvii) Chair with desk (FD-80) |
| 557 | (xxviii) Desk and seat combination (F/IAT/14/65/S-16) |
| 558 | (xxix) Desk student (GF-41) |
| 559 | (xxx) Desk with bench type 'A' (F-20) |
| 560 | (xxxi) Foam with out back (F-7,FD-77(M) |
| 561 | (xxxii)Locker bed side (DB-4047,FD-54(M) |
| 562 | (xxxiii) Rack side 3/4 space (DB-4123,FD-97) |
| 563 | (xxxiv) Board Notice (DB-10182) |
| 564 | (xxxv) Base cabinet type 'B' |
| 565 | (xxxvi) Base cabinet type'D' |
| 566 | (xxxvii) Base cabinet type'E' |
| 567 | Repairs to Almirah large/medium steel (Drg No : FD-67,1032) |
| 568 | (a) Removing the existing unserviceable old locks fromAlmirah steel supply and fix new lock made out of steel body grade I type of 75 mm size with six brass levers (Make Algrah) and with duplicate keys, all and fixed to the steel Almirah with four screw or as required, complete all as specified and directed by Engineer-in-charge. |
| 569 | (b) Removing exisisting unserviceable handle from steel Almirah, supply & fix new steel chromium plated handle of 150 mm size all as per Godrej pattern and fixed to steel Almirah with hexogonal nut & steel pin of appropriate size complete all as specified and directed by Engineer-in-charge |
| 570 | (c ) Taking out existing shelves of any size carrying out all minor repairs to the shelves, refixing the same to the steel Almirah with providing four Nos of new cleats with nuts&bolts all as specified and directed by Engineer-in-charge |
| 571 | (d) Removing unserviceable pair of foot rest from steel Almirah. S&F of new foot rest made out of 1mm thick mild steel sheet named all as shown on drawing and directed by Engineer-in charge |
| 572 | (e) Removing the dents,bends of steel Almirah welding to broken portion, rectifying all minor defects and repairs. M&L for preparation of steel surface of almirah (inside and out side) including doors shelves and legs. Providing high class glossy finish with synthetic enamel paint over a coat of red oxide premier whereever required. All complete as directed:- |
| 573 | (i) For Almirah large steel |
| 574 | Revolving chair (TP) |
| 575 | (i) Replacing old damaged base platform with new base platform made of hard PVC with castor nylon wheels of good quality to suit the existing size and design of chair revolving low high and medium backs(trade pattern) complete all as specified and Directed by Engr In Charge |
| 576 | (ii) Replacing and damaged hand rest of chair revolving High back(Trade pattern) with new hand rest made of polyurethane material to suit the existing size and design complete all as specified and directed |
| 577 | iii)Replacing old damaged and unserviceable assembly bolt with new hydrolic system assembly approved quality to suit the existing size and design of chair revolving low,high and medium backs(Trade Pattern) complete all as specified and directed. |
| 578 | iv)Replacing old damaged and unserviceable assembly tiling bolt with new tiling service assembly approved quality to suit the existing size and design of chair revolving low,high and medium backs(Trade Pattern) complete all as specified and directed. |
| 579 | v)Removal of old and unserviceable fabric/rexene and foam from the seat and back of chair and replacing with new approved quality fabric/rexene (cost not less than Rs 250/metre) and foam as per existing size quality) and design for chair revolving high back(trade Pattern) complete all as specified and directed |
| 580 | OFFICE TABLE:- (Drg No : FD-42 (M), FD-231, FD-239, FD-224, FD-88)) |
| 581 | (i) Replacement of old unserviceable top with new top made out of 18mm prelaminated particle board both sides laminated with 4mm teak wood beeding at 4 sides as per drgs. |
| 582 | (ii) Replacement of old unserviceable legs with new legs made out of 1st class teak wood as per drgs. |
| 583 | (iii) Replacement of old unserviceable long rails with new long rails made out of 1st class teak wood as per drgs. |
| 584 | (iv) Replacement of old unserviceable short rails with new short rails made out of 1st class teak wood as per drgs. |
| 585 | Office steel chair (Drg No : FD-75 |
| 586 | i) Reoving the existing broken/damage wooden seat frame of chair steel tubular with arms and providing with new hardwood frame duly canned and painted with two coats of blac synthetic enamel paints all as specified and directed by Engineer in Chrage |
| 587 | ii) Reoving the existing broken/damage wooden seat frame of chair steel tubular without arms and providing with new hardwood frame duly canned and painted with two coats of blac synthetic enamel paints all as specified and directed by Engineer in Chrage Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender