Tender For Construction Of Stainless Steel Bus Shelter At Muthalagupatty (Ayyankulam) In Ward No 10 Dindigul City Municipal Corporation
Tender Value
7 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Stainless Steel Bus Shelter At Muthalagupatty (Ayyankulam) In Ward No 10 Dindigul City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils andto full depth as may be directed except inrock requiring blasting inclusive of shoring shuttering,bailing out water wherevernecessary and depositing the surplus earth within the compound in places shown by the departmental officerswithan initial leadof 10mts and initial lift of 2.00mts. and clearingand levelling the site, etc., |
| 2 | Cement Concrete 1:5:10 (OneCement, Fivecrushed stone sand and Tenhard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation includingde watering wherever necessary and laidin layers of not more than 15cm thick well rammed, consolidated and includingcuring etc. complete complyingwith standard specification andas directedby the departmental officers. -Mixing by manual means |
| 3 | Supplying and erecting steel centering including necessary supports forplane surfaces for Reinforced Cement Concreteworks such as column footings, columnpedestals, plinthbeams, grade beams, staircasesteps, Sill slabsetc. which require only nominal struttingusingmild steel sheets ofsize 90cm x 60cm and 10BG stiffened with welded mild steel angle sof size 25mmx 25mm x 3mmfor boarding, laidwith silveroakjoistsof size10cmx 5cm&7.5cmx5 cmassupportrunner vertical stiffener, sidesupport and Top Horizontal stiffener space databout 60cmto90cmc entre to centre or at suitable intervalsetc. complete inall floors complyingwithstandardspecifcation. (Payment for centering shall be given after the concrete is laid) |
| 4 | a) For Vertical centering |
| 5 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graD/F hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommenD/F proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 6 | Supplying, fabricating and placing in position Mild Steel/ Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steelreinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 7 | Supply and fillingin foundation and basement with Well Gravel inlayersofnotmore than15cm .thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Brickwork in following Cement Mortar usingbestquality BurntClayB rickof size 9”x43/8”x2 3/4”with class designation o f7.5 conforming to IS1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing,etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall bed one as per IS2212-1991adopting English Bond generally .other type of bond shall bedone as directedby theExecutiveEngineer in charge. Cement Mortar 1;5 |
| 9 | Flooring with ceramic tilesof following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushedstoneSand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Groutat therateof0.27Kg./sq.m.etc.,complete complying with standard specification and as directed by the departmental officers. (The makea nd brandof the tiles shouldbe got approved by Executive Engineer before use on works) |
| 10 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 11 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 12 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections with stand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer |
| 13 | Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD - 127) |
| 14 | Supplyand fixingof 25AFlush typeWall Socket25ADPMCBcompleteset forACPlug in flushwithwallwithearthconnection (For AC Plug) |
| 15 | Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (SD - 73) |
| 16 | Wiringwith2x1.5sq.mm. PVC insulated SC unsheathed FRLScopper conductor of1100V grade insuitablePVCrigid pipe on wall and ceiling withPVC accessoriesandwith TWswitchboxand5AFT switch with painting of suitablecolourfor open PVC light point / fan point (for electronic regulator) (6 points per coil) SD 20 |
| 17 | Wiringwith2x4sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100Vgrade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box in flush with wall with3mm thick hylem sheet cover for15A 3pin flush typenon inter lockingwall socketwith 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point SD 41 |
| 18 | Supply and fixing 18W LED 3000K Square Type Recessed Fitting with LED with |
| 19 | Supply and fixing 1.5 TR Split Type AC Unit - 3 Star Rated |
| 20 | Supply and fixing Polycarbonate Sheet 6mm thick including all cost and Convayance of Charges etc Completed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender