Tender For Construction Of Passenger Shelter In Govt. Higher Secondary School @ Thopp Atty Head Of Thopp Atty. 1 Work Under Mplads - 2026-27- Thopp Atty Block - Tn-05-Tpt-Mplads - 2026-27-Thopp Atty -01
Tender Value
7 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
14 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Passenger Shelter In Govt. Higher Secondary School @ Thopp Atty Head Of Thopp Atty. 1 Work Under Mplads - 2026-27- Thopp Atty Block - Tn-05-Tpt-Mplads - 2026-27-Thopp Atty -01
BOQ
| Sl. No. | Item Description |
| 1 | 1.Name of Work: Construction of Passenger Shelter in Govt. Higher Secondary School @ Thoppampatty H/O Thoppampatty.Estimate Amount Rs.7.00 Lakhs |
| 2 | Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B |
| 3 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all matials to site and all labour charges etc., complete. |
| 5 | Brick work in c.m 1:5 mix using country bricks including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 6 | Filling with excavated earth other than sand including all labour charges as per standard specification. |
| 7 | Supply & erection of centering for sides & soffits of all R.C.C. works including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 8 | Below Ground level |
| 9 | Above Ground level |
| 10 | Supplying and fabrication of steel rods including cost & conveyance of steel as per std. Specification etc., complete. |
| 11 | RCC 1:1 1/2:3 mix using 20 mm ISS HBG metal including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 12 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 13 | Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete. |
| 14 | Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials & all labour charges etc., complete. |
| 15 | Supplying and paving the floor with plain vertified tiles approved quality of size 600x600x8mm including cost and conveyance of all materials & all labour charges etc., complete. |
| 16 | Supplying and fixing Dadooing wall tiles of size 15x15x6mm thick including cost and conveyance and labour charges etc., complete complying with standard specifications. |
| 17 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 18 | Providing weathering course with best quality of broken jelly of size 20 mm uniform guage in pure slacked lime (no sand to be used) over the roof slab in the proportion of brickjelly lime 32:121/2 by volume and laid over in a single layer and consolidated |
| 19 | Finishing the top of roof with one course of machine pressed tiles of size 20cmx20cmx20 mm of approved quality laid in cement mortar 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2% weightof cement used and the joint pointed |
| 20 | White washing two coats with freshly burnt white shelllime in all floors including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 21 | Painting two coats with ready mixed Plastic Emulsion of I st Class Quality paint and of approved colour over a priming coat including through scrapping, clean removal of dirt and cost and conveyance of all materials and labour charges etc,complete. |
| 22 | Painting two coats with enamel paint over new iron work including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 23 | Towards supply and delivery of steel window as per std. Specification |
| 24 | Towards Name board charges |
| 25 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender