Tender For Renovation Of Toilets Including Painting And Essential Repairs To Inspection Bungalow At Oakland, Shillong.
Tender Value
8.20 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
6 days left
EMD
16403
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Toilets Including Painting And Essential Repairs To Inspection Bungalow At Oakland, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 2 | 25 mm dia (heavy type) |
| 3 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
| 4 | Extruded section profile size 42x50 mm |
| 5 | Providing and fixing to existing door frames. 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± |
| 6 | 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 7 | Providing and fixing ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 10 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 12 | Old work (one or more coats) |
| 13 | Polishing on wood work with ready made wax polish of approved brand and manufacture : |
| 14 | Old work . |
| 15 | Renewing glass panes, with wooden fillets wherever necessary: |
| 16 | i) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 17 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 18 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 19 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 20 | For thickness of tiles 10 mm to 25 mm |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 22 | W.C. pan with ISI marked white solid plastic seat and lid |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 24 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 25 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 26 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 27 | 10 litre capacity - White |
| 28 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 29 | 15 mm nominal dia |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 32 | Providing and fixing toilet paper holder : |
| 33 | i) C.P. brass |
| 34 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 35 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 36 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 38 | 20 mm nominal outer dia .Pipes. |
| 39 | 25 mm nominal outer dia .Pipes. |
| 40 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 41 | 15 mm nominal bore |
| 42 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 43 | 100 mm diameter |
| 44 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 45 | 15 mm nominal bore. |
| 46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 47 | 15mm nominal bore |
| 48 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 49 | 100 mm nominal dia. |
| 50 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 52 | 75 mm diameter |
| 53 | 110 mm diameter |
| 54 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 55 | Single tee without door |
| 56 | i)75x75x75 mm |
| 57 | ii) 110x110x110 mm |
| 58 | Bend 87.5° |
| 59 | i) 75 mm bend |
| 60 | ii) 110 mm bend |
| 61 | Providing and fixing PVC overhead (OH) water tank covers using screws, including the removal and disposal of old covers. The work shall be carried out at all levels as per the direction of the Engineer-in-Charge. |
| 62 | Cleaning of terraces by removing leaves, grass, dust, rubbish, and other accumulated materials, including the removal of blockages/chokages from khurras and spouts of terraces/chajjas at all heights. The collected rubbish shall be disposed of at the designated dumping ground outside the building’s periphery.The entire terrace of one building shall be measured as one job for payment. The work shall be carried out as per the direction of the Engineer-in-Charge. |
| 63 | Deep cleaning of the toilets which includes cleaning the wall tiles, sanitary fittings & fixtures, water supply fittings & fixtures, mirrors, doors, and ventilators using suitable cleaning agents such as bleaching powder, Harpic, Lizol, or equivalent, as required. Additionally, placing Air freshners like Odonil or equivalent at designated locations in each toilet as directed by the Engineer-in-Charge. |
| 64 | Charges for arranging skilled labour like carpenter / plumber/Mason for attending minor repair works including cost of hiring charges for cutting machines, drilling machines and other tools required for carrying out the work. etc., complete as directed by the Engineer-in-charge. (The cost of required fittings & fixtures etc.shall be paid separately) |
| 65 | Charges for arranging unskilled labour/coolie/ beldar for attending minor works including cost of tools like hammer, chisel, spade, pick axe etc required for carrying out the work. etc., complete as directed by the Engineer-in-charge. (The cost of required fittings & fixtures etc.shall be paid separately) |
| 66 | Removing the damaged health faucet and providing and fixing a CP brass health faucet of approved quality. The work includes all necessary operations and shall be completed as per the direction of the Engineer-in-Charge. |
| 67 | Health faucet with PVC pipe including holder. |
| 68 | Providing PVC mosquite mesh and fixing to windows by means of velcro tape- one part stitched to the mesh and the other pasted to the aluminium windows with adhesive of approved brand and type as approved including providing suitable cutouts for operating window handles. Further all the exposed edges of the window mesh should be provided with cloth piping etc complete |
| 69 | Removing of old carpet including cleaning of deposited adhesives on mosiac flooring surface etc and disposal of rubbish to the municipal approved dumping yard etc. all complete and as per direction of Engineer in charge |
| 70 | Cleaning of aluminium windows including glass panes with appropraite cleaning agents etc complete as directed by the Engineer-in Charge. |
| 71 | Providing and fixing aluminium lever handles to aluminium openable window shutters with necessary screws stc complete as directed by the Engineer-in Charge. |
| 72 | Deep cleaning of the existing carpet in various rooms by professional cleaning services in order to remove all dust and dirt without damaging the fabric. Proper tools and suitable cleaning solutions shall be used to ensure an effective and seamless cleaning process etc complete as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender