Tender For Construction Of 33 Kv Line Shahzadpur For 33/11 Kv S/S Shahzadpur Distt Amebdkarnagar
Tender Value
29.29 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
30000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 33 Kv Line Shahzadpur For 33/11 Kv S/S Shahzadpur Distt Amebdkarnagar
BOQ
| Sl. No. | Item Description |
| 1 | Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EE ESD Ayodhaya to dump site proper stacking. |
| 2 | PCC 11 Mtr. |
| 3 | PCC 9.0 Mtr. |
| 4 | M.S. Top Channel 125x65 mm 3200 mm |
| 5 | M.S. Angle 65x65x6 mm Bracing, 4300 mm |
| 6 | Dropper Channel 125x65 mm 3200 mm |
| 7 | MS Angle for guarding 65x65x6 mm, 3500 mm long |
| 8 | GI Wire 8 SWG |
| 9 | GI Wire 6 SWG |
| 10 | 33 KV Disc Insulator B & S Type polymer 70 kn |
| 11 | V Type channel cross arm |
| 12 | 33 KV Pin Insulator polymer type |
| 13 | Stay Wire 7/8 SWG |
| 14 | Cost of ACSR Dog Conductor (3.5x3+5%) (Sag charges, cutting and wastage) |
| 15 | Cost of 33 KV 3x300 sq mm XLPE Cable |
| 16 | 33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable |
| 17 | 33 KV S/T Jointing kit 3x300 xlpe cable |
| 18 | M.S. Channel 125x65x6 |
| 19 | M.S. Angle 75x75x6 |
| 20 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide , necessary clamps, F-brackets, Nut - Bolts, Washers etc.) |
| 21 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Sectional Double pole for 33 KV Line on 11.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm , Bracing angle 1 set.,33 Kv , Disc insulator 6 No. and 3 No. Pin insulator as per norms. (Contractor shall provide , E- Bracket , necessary clamps, Disc Fitting, Nut - Bolts etc.) |
| 22 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Dead End Double pole for 33 KV Line on 11.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm, 3 No. Disc. Fitting , Bracing angle 1 set., Disc insulator 3 No. as per norms. (Contractor shall provide , necessary clamps, Disc Fitting, Nut - Bolts etc.) |
| 23 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Sectional Double pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65x6 mm size 3200 mm , Bracing angle 1 set.,33 Kv , Disc insulator 6 No. and 3 No. Pin insulator as per norms. (Contractor shall provide , E- Bracket , necessary clamps, Disc Fitting, Nut - Bolts etc.) |
| 24 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 11.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 4 No. Top channel of 125x65x6 mm size 3200 mm, Disc Fitting 6 No. Bracing angle 4 set, 6 No. 33 kv disc insulator B &S , Pin insulator 09 No. as per norms. (Contractor shall provide , E- Bracket ., necessary clamps, Disc Fitting, F-clamp , Nut - Bolts washers etc. ) |
| 25 | Nozeling and grouting of stay set. (All the civil material and stay set, stay clamp, stay insulator tec.will be arranged by the contractor except Stay wire) |
| 26 | Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material and 33 KV G.I stay set 20x1800 mm, stay clamp, stay insulator etc will be arranged by the contractor except stay wire) |
| 27 | Cradle Guarding of 33 KV line at road crossing, canal/telephone line crossing by fixing Guarding Angle 65x65x6 mm, 3500 mm at double pole and 2600 mm long at single pole by stringing and sagging of 3 No. G.I.wire with lacing and tightening with mounting. (Contractor shall provide Necessary clamps for fitting of guarding angle and 6 No. Eye hook&bolt 12x110 mm etc.) |
| 28 | Angle for Cross arm Support at Angle Location 65x65x6 mm 1600 mm long with clamps and nut & bolt. (All materials will be supplied by the contractor) |
| 29 | 33 KV Cable stand StructureFabrication & erection of 33 KV Cable Stand made of 02 No. M.S chanel 125x65x6 mm 3 Mtr. Jointed to each other by M.S Channel horizontally and also jointed to each other by means of 05 No. M.S Strip (m.s flat) 50x6 mm of size 200 mm long each by welding at actual distance interval as per norms. And grouting in block of 300x300x700 completely providing 02 no. cable clamps also and eathing by G.I strip 50x6 mm size with the earth mat of switchyard both side of legs and provideing clamps , post/ pin insulator for holding cable. (All the materials will be arranged by the contractor such that clamps nut bolts and civil materials except M.S channel.) |
| 30 | Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33 KV Line including fixing, mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc) |
| 31 | Laying & Dressing of 3x300 sq. mm XLPE Cable underground Single Circuit.Laying of double circuit 3x300 sq .mm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required materials, as 1st class Bricks, Stone slabs and fine sand. Providing 150 mm fine sand cusion beneath, and 150 mm sand cusion above the cable. The cable shall be duly protected by Bricks, sand and stone slab. The inter axial spacing between two cables should be in between 0.25 to 0.04 M. After laying the cable refilling and ramming of the left out soil,closing the trench and leveling. |
| 32 | Installation of Heat Shrinkable Type cable jointing kits of following types/sizes for 33 XLPE Cable. |
| 33 | (a) Fixing of 33 KV 3x300 sq. mm Straight Through joints. (jointing kit supplied by dept.) |
| 34 | (b) Fixing of 33 KV 3x300 sq. mm Outdoor End Terminations (jointing kit supplied by dept.) |
| 35 | High Pressure testing to which 33 KV Line & cable to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor) |
| 36 | Hoisting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, providing long barral lugs 6 nos and P.G. Clamps & \\"Y\\" shape jumpering properly and 02 nos. supporting angle 65X65X6, 2240 mm long and making connection including supply of jumpering cable ,mounting clamps as per RESSPO Norms. (All material will be supplied by the contractor like M.S Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 2240 mm and jumpering cable suitable for 33 KV jumper). |
| 37 | Grouting of following structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP/PCC respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering. |
| 38 | 11 Mtr PCC Poles |
| 39 | 9.0 Mtr PCC pole |
| 40 | Supply and fixing of a stone pad of size 300x300x75 mm at PCC/STP Bottom of the pit ( Contractor shall provide all materials) |
| 41 | Fabrication, Erection and grouting of route marker and marking 33 KV line by painting after grooving on the stone. (Contractor shall provide all materials) |
| 42 | Fixing of barbed wire on poleSupply and fixing of barbed wire on the pole above 2750 mm ground level. Barbed wire wrapped for a distance of 0.9 mtr. with a pitch of 13.mm at a height. (All materials supplied by the contractor) |
| 43 | Fixing of Danger board .Supply and fitting of Danger board of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor) |
| 44 | Fixing of Number plate .Supply and fitting of Number plate of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor) |
| 45 | Earthing of PoleEarthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod, 6 swg wire, Earthing clamps and nut & bolt etc.) |
| 46 | Petrolling in feet from starting to end and removal/lopping and chopping of tree branches which are lying in routre of 33 KV overhead line. |
| 47 | Providing of HDPE 6\\"Dia Pipe PN-6 Specification |
| 48 | Laying of cable & HDPE PipeLaying of 33 KV 3x300 Sq mm XLPE cable and HDPE Pipe by drilling method below NHAI road crossing. The cable be laid at the depth of 3 mtr from the under surface in HDPE pipe |
| 49 | NOC will be granted from Central/ state Electrical safety department.( Final settlement of the payment will be done after providing receipt, agreement and permission paper). |
| 50 | Permission of NHAI/PWD etc. for road crossing. .( Final settlement of the payment will be done after providing receipt, agreement and permission paper) |
| 51 | Permission of railway crossingpermission must be granted from railway authority for laying of 33 kv cable and pipe under the railway crossing (final settlement of payment will be on the basis of after provindg of receipt and agreement of permission of railway crossing) |
| 52 | Restoring the road as it is before after completion of work |
| 53 | Received back materials which is replaced and left over including cable iron drun after erection. It will be deposited to the respected to store center in which the project location comes under. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender