Tender For Maintenance And Operation Of E&M Services At Thyagraj Sprots Compelx, New Delhi. (Sh: Providing Led Light Fixtures, Shifting Of Electrical Panel And Other Misc electrical installation Related Works At Thyagraj Sports Complex, Delhi.)
Tender Value
4.73 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
7 days left
EMD
9475
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Operation Of E&M Services At Thyagraj Sprots Compelx, New Delhi. (Sh: Providing Led Light Fixtures, Shifting Of Electrical Panel And Other Misc electrical installation Related Works At Thyagraj Sports Complex, Delhi.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 2 | 100 A, 16 KA,TPMCCB |
| 3 | 200 A, 16 KA,TPMCCB |
| 4 | Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. |
| 5 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 6 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 7 | 450 mm width X 50 mm depth X 1.6 mm thickness |
| 8 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 9 | 50 mm dia |
| 10 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 11 | 50 mm dia |
| 12 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 13 | 80 mm dia |
| 14 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 15 | 80mm dia. |
| 16 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.. |
| 17 | Dismantling of existing electric panel installed at basement of Main building including disconnection of incoming supply & all outgoings and reinstallation of same after all necessary cleaning of all panel asseseries with satisfactory manner etc complete as req at site |
| 18 | Providing and making of Foundation for electric panel installed at basement of Main building atleast minimum 600 mm above the ground level of basement i/c making Iron Aggle Frame (Angle Bar Size: 25mmX25mmX5mm) of size 2000 mm (L) X 400 mm (W) suitable for the panel diamention etc complete a req at site. |
| 19 | Poviding and fixing of Stud type Terminal Block of following rating for the connections of all cable outgoings. The wire should be crimped to thimble and is connected to the flat current bar on the Terminal Block with all protective Covers in transparent plastic to fully shroud these assemblies etc complete as reqd at site. |
| 20 | for 10 Sqmm Cable |
| 21 | for 16 Sqmm cable |
| 22 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 23 | 3½ X 95 sq. mm (45mm) |
| 24 | 4 X 16 sq. mm (28mm) |
| 25 | Supplying, installation, testing & Commissioning of LED Bulkhead light of 10W & min. 800lm, IP65, CCT- 4000K in housing of aluminium die cast with opal diffuser complete with mounting brackets & accessories as required with connections. |
| 26 | Credit of old dismantled item from above work |
| 27 | Bulkhead light ( Assorted size) |
| 28 | Rusted Cable tray Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender