Tender For Providing Bore Well With Fixing Of Mini Power Pump And Water Supply Arrangements To Ward-2 M.M Nagar In Devakottai Municipality .
Tender Value
5 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
16 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Bore Well With Fixing Of Mini Power Pump And Water Supply Arrangements To Ward-2 M.M Nagar In Devakottai Municipality .
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of borewells of size 6” to 8” dia. in sedimentary formation using hand boreset including insertion of casing pipe etc., and supplying and packing of pebbles (Conveyance of hand bore set including loading and unloading to be done by the contractor) |
| 2 | Supply of 150mm dia PVC ribbed borewell casing pipe CM blue colour plain pipe including material and transportation charges etc.complete as per std specification. |
| 3 | Supply of 150mm dia PVC ribbed borewell casing pipe CM blue colour slotted pipe including material and transportation charges etc.complete as per std specification. |
| 4 | Charges for developing the Borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by Departmental officers and conducting yield test by 'V' notch method. |
| 5 | Supply of 150mm PVC End cap. (20) – 11 including all charges etc.complete as per std specification |
| 6 | Conducting Geophysical survery charges |
| 7 | Supply and delivery of 32mm UPVC submerssible pipe of 3M length heavy type pipe |
| 8 | Supply of 50mm GI Union including material and transportation charges etc.complete as per std specification |
| 9 | Supply of 50MM Non Return Value including material and transportation charges etc.complete as per std specification. |
| 10 | Supply of 50MM Flangeset including material and transportation charges etc.complete as per std specification. |
| 11 | Supply and delivery of 20mm thick Nylon Rope etc.complete as per std specification. |
| 12 | Supply and delivery of 1.5HP wet type submerssible pumpset conform to ISI with 15LPM x 60M head including material and transportation charges etc.complete as per std specification. . |
| 13 | Supply and delivery of 1.5 HP panel board starter suitable for single phase submerssible pumset including material and transportation charges etc.complete as per std specification. . |
| 14 | Supply and delivery of 4.00 Sq.mm 3 core flat copper submerssible cable wire including material and transportation charges etc.complete as per std specification. |
| 15 | Supply of 150 MM M.S. Bore cap using M.S plate size 1 cmx3mm and M.S sheet on top with bolting arangements |
| 16 | Supply of 50 MM M.S. clamp set with bolt and nut including material and labour charges etc.complete as per std specification |
| 17 | Labour charges for the erection of 1.5H.Psubmersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board etc. complete . |
| 18 | Supply and run of 4 X 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains etc, complete as per standard specifications.SD 68 |
| 19 | Supply and run of 4x6 sq.mm .(84/0.3)PVC insulated SC unsheathed copper conductor of1100V grade in 32mm dia GIpipe(Class'B') suitablybentat both ends with necessary angle iron up right and end supports for mains SD 73 |
| 20 | Supply and fixing of 3phase 32A aerial fuse unit for 3Nos.32A fuse units(500V)on suitable Ms sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps SD 132 |
| 21 | Supply and fixng of TNEB meter board suitable for single phase 32A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size1-1/2\\"x1-1/2\\"x1/4\\"rigid lyfixed on wall covered with hylem sheet of size 2feetx1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.63A fuse units (500V),1No.neutral link,copper earth flat of size1\\"x1/4\\"with inter connection of EBmeter to fuse units by 7/16 PVC insulated copper wire with earth connection complete SD 125 |
| 22 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete |
| 23 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 24 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\\"X43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification.- |
| 25 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 26 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. |
| 27 | Providing Cuddapah slabs of 40mm thick over a base mortar in CM 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20 mm thick and pointed with cement mortar 1:3 ( one cement and three Plastering sand) usimg Black oxide complying with standard specification |
| 28 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 29 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 30 | Provision of water supply arrangements GI & PVC pipe and specials 32mm dia Upvc pipe |
| 31 | 32mm dia Upvc bend |
| 32 | 32mm dia Upvc coupling |
| 33 | 20mm dia Tap |
| 34 | 1000 lit sintex tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender