Tender For Repair & maintenance Of electrical installation Work In Community Centres/Nrb Buildings Under Ward No. 23, 31 & 32, Under Electrical Sub Division No.3, M.C. Chandigarh.
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
9990
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & maintenance Of electrical installation Work In Community Centres/Nrb Buildings Under Ward No. 23, 31 & 32, Under Electrical Sub Division No.3, M.C. Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | S / E of ceiling fans 1400mm sweep without fan regulator complete with aluminium blades, plastic canopies 2 Nos. double bal bearing, MS hanging rods, condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5sq.mm single core copper conductor cable. The sample of fans shall be gotapproved from the Engineer-in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the Engineer-in-Charge.[Size56\\" 1400mm sweep ceiling fan of Havells make Velocity White / Orient make Summer Breeze Crompton make Cool Breeze / Usha make Apollo Bajaj make Sabse. Tez only |
| 2 | Supply and Erection of Exhaust fan (heavy duty motor with copper wound metallic body) following size complete with motor, mettalic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation,epoxy powder coating along with mettalic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. Size 12\\" Sweep 900 RPM with louver of Havells make Turbo Force SP/ Orient make Industrial heavy duty / Crompton make HDEF EXHD 300- 6-1 / Bajaj make Supreme DLX only. |
| 3 | Supply,Installation, Testing and Commissionng of wall fan 450 mm (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton/Havells / Armonard/ Bajaj) complete in all respect.There shall be free replacement at site for a period of five year from the date of delivery, Toll free number shall be provided by the supplier to the client Exhaust fan , wall fan etc. Complete in all respect, as required. |
| 4 | Supply & Erection of 1x18 watt retrofit LED tube rod with Channel Supply & Erection of 1x18 watt retrofit LED tube rod with Channel made of aluminium housing with PC diffuser Lumen out put should be more than 100 lumens per watt (1800 LUM) with LM 79 report from NABL. The make of the fittings should beHavells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj . The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 5 | P/F of LED luminarie of size 2'x2' of 30-36 watt (595x595 mm) surface/recess type including driver with system Lumens 3600-4000 Im having efficacy of minimum 100 lm/W. THD <10%, PF > 0.95, Having coloured temperature 4000-6500 K recess type suitable to be fixed in Armstrong/ grid ceiling. The fitting should provides soft light and glare free symmetrical illumination and is to be fixed in the existing false ceiling frame of make Havells/ Wipro/ Twinkle/ Surya/ Phillips/ Bajaj alongwith connection, testing and commissioning erc. This job also includes all petty material required to be entire satisfaction of Engineer-in-charge. Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. |
| 6 | Supply & erection of high power 200 Watt LED Flood Light luminaries(System lumen efficacy ≥120 and <135 lm/Watt) High-brightness White LEDs sources with high transmittance LENS on each LEDs 4000 K to 6000 K color temperature & CRI<70 value for ensuring good quality light output. Life of at least 50,000 hours & LED driver efficiency >95% Power factor greater than 0.90, THD<15% & min 6KV surge protection with operating voltage range from 120-270 V for ensuring lifelong high performance of luminaire, having in built protection against short circuit, over voltage protection, the fixture is made of LM-6 Pressure die-cast aluminum with engraved company name & have IK05 & IP66 Class I protection with NABL Accredited LM-79 & LM-80 Report. The fixture should be comprehensively warranted to be repaired or replaced for any defect within 5 years of installations. The luminary should not be over power derived. The fitting shall be mounted on the plate bracket on existing pole including making connection, testing & energizing complete in all respect to the entire satisfaction of Engineer-in-charge. The LED Street Light Fixture shall be installed on 7.5/9/10 mtr long pole. The luminary should be make Philips/ Bajaj/Crompton/ Havells/ Surya/ Wipro/HQ Lamp. |
| 7 | S/I/T/C OF 8-12 Watt LED Downlighter, made of extruded aluminium housing and high power LED as alight source wih clear diffuser and including electronic driver with minimum 95 Lumens/watt, THD <10%, Pf > 0.95, protection IP 20, and CCT 4000-5700K, Surge protection 4kV, Operating Voltage Range - 150V – 270Volts.MAKE- philips ,Wipro,Trilux,Osram,Havells, JAGUAR complete in all respect.Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. The work shall be executed to the entire satisfaction of Engineer-in-charge |
| 8 | S/I/T/C OF 13-18 Watt LED Downlighter, made of extruded aluminium housing and high power LED as alight source wih clear diffuser and incluting electronic driver with minimum 100 Lumens/watt, THD <10%, Pf > 0.95, protection IP 20, and CCT 4000-5700K, Surge protection 4kV, Operating Voltage Range - 150V – 270Volts.MAKE- philips ,Wipro,Trilux,Osram,Havells, JAGUAR complete in all respect.Warranty:- The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations. The work shall be executed to the entire satisfaction of Engineer-in-charge |
| 9 | Full stator copper rewiding of an ceiling fan (condensor type) of 1200/1400 mm sweep including (ball bearing if required) and cleaning and insulating the stator slots, sleeving, soldering, wrapping of cotton tape, re-assembling, varnishing and testing etc. complete in all respect. (in working condition). The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 10 | Supply and installation of fan condenser of required microfarad 2.5/3.25uF of ISI make. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 11 | P/F LED lamp 9 watt screw type lamp of make - Bajaj/Havells/ Wipro/ Philips/Orient. And work should be executed as per the entire satisfaction of Engineer in charge. |
| 12 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. Make: ABB, Havells,Legrand, Northwest Wipro, Norysis, Captree (Murano), Schneider. 16 Module 16 Module |
| 13 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.. Make: ABB, Havells,Legrand, Northwest Wipro, Schneider, Goldmedal, L&T. |
| 14 | 2 or 3 Module DSR1.28.1 |
| 15 | 4 Module DSR1.28.3 |
| 16 | 6 Module DSR1.28.4 |
| 17 | 8 Module DSR1.28.5 |
| 18 | 12 Module DSR1.28.6 |
| 19 | Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plate etc.as required.Make:ABB, Havells,Legrand, Northwest Wipro, Schneider, Goldmedal, L&T.. DSR 1.25 |
| 20 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable and 1.5 sq. mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C DSR 1.15.3 |
| 21 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connectioN.S (M.R) but excluding modular plate etc. as per existing installaed model as required. Make: ABB, Havells,Legrand, Northwest Wipro, Schneider, Goldmedal, L&T. |
| 22 | 3 pin 5/6 amp switch outlet DSR 1.24.1 |
| 23 | 15/16 amps switch outlet DSR1.24.3 |
| 24 | 3 pin 5/6 amp socket outlet DSR1.24.4 |
| 25 | 15/16 amps socket outlet DSR 1.24.5 |
| 26 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make: Finolex/Polycab/Havells/KEI |
| 27 | 3x 1.5 sq. mm DSR 1.17.3 |
| 28 | 3x 2.5 sq. mm DSR 1.17.12 |
| 29 | 3x 4 sq. mm DSR 1.17.21 |
| 30 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 31 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 32 | Providing and fixing 100 A 30 KA 4 POLE rating and breaking capacity MCCB withthermomagnetic release and terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required. |
| 33 | Providing and fixing 200 A 30 KA 4 POLE rating and breaking capacity MCCB withthermomagnetic release and terminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, making connections, etc. as required. |
| 34 | Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR 1.34 |
| 35 | Supplying and fixing of following size of heavy duty ISI marked PVC conduit alongwith accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm DSR 1.21.2 |
| 36 | Supply and Fixing following rating, four pole, 415 volts, MCB TPN with box complete with connections tensing and commissioning etc as required. Make of Anchor, Havells, Legrand, ABB, L&T, Siemens,Schneider. The work shall be executed to the entire satisfaction of Engineer in charge. 63 Amps DSR 2.1.2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender