Tender For Construction Of Partition Wall, False Ceiling, Wall Panelling, Shelves And Other Allied Works At West District Laboratory And Office Of The Executive Engineer, Dws Division, Agartala-Ii During The Year 2026-27
Tender Value
9.20 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
6 days left
EMD
18401
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Partition Wall, False Ceiling, Wall Panelling, Shelves And Other Allied Works At West District Laboratory And Office Of The Executive Engineer, Dws Division, Agartala-Ii During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Providing & fixing in position wall panelling at all heights with 6mm thick BWP ply board lapping with 4mm thick Teak Veneer of approved quality in outer face, decorative teak wood bead (50x40) at top & skirting (150x25), comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50x32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots & finally ply board are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13x3.2mm all complete as per manufacturer's specification as per direction of Eng-in-Charge all complete. |
| 2 | Providing & fixing tiled false ceiling of specifiedmaterials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 m and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke etectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings etc. complete and as per direction of Engineer-in-charge. |
| 3 | i) 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 4 | Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made Note: For uPVC frame, sash and mullion extrudedprofiles minus 5% tolerance in dimension i.e. in depth width of profile shall be acceptable. i) Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 5 | Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately) |
| 6 | 25 mm thick |
| 7 | Dismantling doors, windows & clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete & stacking within 50metres lead :i) Of area 3 sqm and below. |
| 8 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 9 | Dismantling wood work in frames, trusses, purlinsand rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres leadi) Of sectional area 40 sq cm and below. |
| 10 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 11 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 12 | Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work (one or more coats), to give an even shade as required complete as per direction of the Engineer in charge. |
| 13 | Providing & applying fire retardant paint unthinned on cleaned wood/ply surface(one or more coats) of required colour of approved brand & manufacture on old work in/c preparation of surface as per recommendation of the manufacturer to make the surface fire returdant and as required complete as per direction of the Eng-in- charge:- |
| 14 | Providing & fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings & fixtures complete. 10 litre capacity-White |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 16 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 17 | Providing & fixing white vitreous china wash basin in/c making all connections but ex/c the cost of fittings: Flat back wash basin of size 630x450mm |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 19 | Flexible pipe 32 mm dia |
| 20 | Providing & fixing mirror of superior glass (of approved quality) & of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 22 | Providing & fixing 28mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or MS pipe (40mm x 20mm) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 0 mm gap for thermal expansion:i) Single socketed pipe - 75 mm OD |
| 24 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel &/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface & reinforcement with wire brushes etc. & disposal of debris for all lead & lifts all complete as per direction of Eng-In-Charge. |
| 25 | i) 25 mm average thickness |
| 26 | Providing, mixing & applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and as per direction of Eng-In-charge complete in all respect. |
| 27 | i) SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. |
| 28 | Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, fine sand & graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete & appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering & shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) |
| 29 | i) 75mm thick in Grade M 25 with cement content not lessthan 418 kg per cum |
| 30 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 31 | Providing and fixing IS:3564 marked aluminiumextruded section body tubular type universalhydraulic door closer with double speed adjustmentwith necessary accessories and screws etc. complete. |
| 32 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. |
| 33 | 600 mm x 600 mm in all shades and designs 1st classquality ceramic floor Porcelain tiles. |
| 34 | Providing & fixing 1st class quality ceramic glazed wall tiles conforming to IS:15622-2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1:3 (1 cement : 3 finesand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Eng-in-charge. |
| 35 | 600 mm X 300 mm in all shades and design |
| 36 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) in/c dressing of sides & ramming of bottoms, lift upto 1.5m, in/c getting out the excavated soil & disposal of surplus excavated soil as directed, within a lead of 50m. |
| 37 | a) All Kinds of Soil |
| 38 | Supplying & filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating & compacting each layer by using plate compactor or by any suitable method complete. |
| 39 | Providing & laying in position cement concrete of specified grade ex/c the cost of centering & shuttering a) All work upto plinth livel |
| 40 | i) 1:4:8 (1 cement : 4 fine sand : 8 graded well burnt brick aggregate of 40mm nominal size) |
| 41 | Half brick masonry work with first class bricks infoundation and plinth in/c cost of all materials asrequired complete:- |
| 42 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 43 | 12 mm cement plaster of mix. |
| 44 | i) In cement mortar 1:4 (1 cement : 4 fine sand) |
| 45 | Neat cement punning. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender