Tender For Fdr/Sdrf: Restoration Of Horizontal Pump Motor, Vernishing, Providing Of Suction Line, Panel Board And Other Allied Works Etc. Due To Natural Calamity Affected At Different L.I. Schemes Under W.R Sub-Division Teliamura During The Year 2026
Tender Value
17.30 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
5 days left
EMD
34604
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fdr/Sdrf: Restoration Of Horizontal Pump Motor, Vernishing, Providing Of Suction Line, Panel Board And Other Allied Works Etc. Due To Natural Calamity Affected At Different L.I. Schemes Under W.R Sub-Division Teliamura During The Year 2026-27. (Job No. Tr/49/2059-Minor Works/Wrd-I/2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge. |
| 2 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 4 | Providing & fitting fixing C.I tail piece of approved quality at site of work.i)150mm dia. |
| 5 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. |
| 6 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.i) C.I. foot valve weight |
| 7 | ii) C.I. foot valve ring |
| 8 | iii) C.I. foot valve net |
| 9 | Providing & fitting fixing PVC suction hose pipes of wall thickness 6mm as per relevant IS Specification and direction of the Engineer-in-charge.i) 150 mm dia |
| 10 | Providing & fitting fixing MS clamp for hose pipes with nuts & bolts complete as per relevant IS Specification and direction of the Engineer-in-charge.i) 150 mm dia. |
| 11 | Providing & fitting fixing MS foot valve as per relevant IS Specification and direction of the Engineer-in-charge.i) 150 mm dia. |
| 12 | Providing & fitting fixing of Fully Automatic Star Delta type Motor startar ( 3ph, 50 Hz, 415V in steel sheet enclosure with Conductor and Timer etc. complete suitable for submersible pump L&T, BCH and ABB make as per specification & direction of Engineer-in- Charge.i) 25HP/18.5 kw Relay range within 13-21+10% . |
| 13 | Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refitting, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work.i) 40 mm dia. nominal bore |
| 14 | ii) 150 mm dia. nominal bore |
| 15 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets and dressing of sides where required, ramming of bottoms , depth upto 1500mm (slope1 in 200) including getting out the excavated soil and backfilling of soil as required after laying of pipeline in layers not exceeding 200mm in depth including consolidating each deposited layers by ramming, watering etc. and disposing of surplus excavated soil with all requireds as per chapter 2 of CPWD specification & direction of Engineer-in-Charge.B. For G.I/CI /DI pipes in new work. A) In all kinds of soil.i) For Pipes exceeding 90mm dia but not exceeding 300 mm dia |
| 16 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineerin-Charge. a) 125/150 mm ɸ |
| 17 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineerin-Charge.A) 125/150 mm. dia. |
| 18 | Labour charge for laying of G.I pipe conforming IS 1161, 3589 & 1239 including fitting fixing complete as per direction of Engineer-in-Charge. |
| 19 | Providing & fixing of GI Bend/elbow in the pipeline in/c testing of joints complete as per CPWD specification and direction of the Engineer-in-Charge.a) 150 mm. dia. |
| 20 | b) 40mm dia. |
| 21 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-incharge. |
| 22 | Providing and fixing GI union as per CPWD specification and direction of the Engineer-in charge.i) 40mm dia |
| 23 | Providing and fixing GI socket as per CPWD specification and direction of the Engineer-in charge.i) 40mm dia |
| 24 | Providing & fixing GI equel tee with the Pipes line including testing of joints complete as per CPWD Specification & direction of Engineer-in Charge.i) 40x40x40 mm dia. |
| 25 | Providing and fitting fixing of brass fullway valve with handle in the GI pipe including cutting,threading etc. complete as per CPWD specification and direction of the Engineer-in-charge.i) 40mm dia |
| 26 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.a) Size 1.20X1.20X0.025 mtr. |
| 27 | Dismentling of pannel board by disconnection of all electrical equipments & stacking of materials & return the same to Sub Divisional store as per direction of the Engineer-in-charge. |
| 28 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional/ replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. |
| 29 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit ( Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, L&T/Havells/BCH make etc. complete as per specification and direction of Engineer-in Charge. i) 63 Amps. |
| 30 | ii) 200 Amps |
| 31 | Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality. |
| 32 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. i) 10 to 12 mm thick |
| 33 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge |
| 34 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a leadof 50 m. -All kinds of soil |
| 35 | Filling available excavated earth (ex/c rock) in trenches,plinth,sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by watering and ramming, lead upto 50m and lift upto 1.50m. - All kinds of soil. |
| 36 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts,cluding spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:(a) 1:2:4 ( 1 Cement:2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 38 | (b)1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 39 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete.i) In cement mortar 1:5 ( 1 cement : 5 fine sand) |
| 40 | 12 mm cement plaster of mix.i) In cement mortar 1:4 (1 cement :4 fine sand) |
| 41 | Neat cement punning. |
| 42 | Providing & fitting fixing of M.S. Flange (8mm wall thickness) by welding with G.I/MS pipe and placing position as per specification & direction of the Engineerin-Charge.a) 150 mm dia. |
| 43 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.a) 150 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender