Tender For Uws Scheme Under North Tripura District During The Year 2026-27 / Sh:-Renovation Of The Building Of Dws Division Office, Dharmanagar.
Tender Value
7.75 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
2 days left
EMD
15517
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Uws Scheme Under North Tripura District During The Year 2026-27 / Sh:-Renovation Of The Building Of Dws Division Office, Dharmanagar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate20 mm nominal size) |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:-i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 5 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with fine sand followed by cleaning with oil-free air blast as required and as directed. |
| 6 | Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 7 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 8 | 15 mm cement plaster on the rough side of single or halfbrick wall of mix:Cement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | Neat cement punning. |
| 10 | Finishing walls with 100% Premium acrylic emulsionpaint having VOC less than 50 gm/litre and UV resistanceas per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (CompanyDepot Tinted) with silicon additives as per manufacturersspecifications [Payment shall be made after submissionof Test Certificate issued by the Manufacturer]:New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 11 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :12.30.1 New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 12 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622 - 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.Double charged Stainfree vitrified tiles (Glossy)Size of tile 1200 mm x 600 mm |
| 13 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 fine sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.ii) 18 mm thick stone slab |
| 14 | Providing and fixing Precast chequered cement concretetiles 18 mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with neat cement slurry including rubbingand cleaning etc. all complete as per direction ofEngineer-in-charge.In dark shade using ordinary cement |
| 15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding. i) Fixed to steel windows by welding.MS Flat 50x8 |
| 16 | Providing structural steel work riveted, bolted or weldedin built up sections, trusses and framed work, includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer all complete asrequired. |
| 17 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge.0.63mm thick with zinc coating not less than 275gm/m2 |
| 18 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position with one coat of primer :Treated (as per IS 401) rubber Wood (PerformanceAppraisal Certificate (PAC) issued by TFDPC Ltd) |
| 19 | Providing and fixing panelled / or panelled and glazedshutters for doors, windows and clerestory windowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcluding panelling and or glazing, which will be paidfor separately but including the wooden beading of 20× 12 mm for fixing panelling and or glazing as perdirection of Engineer-In-Charge.Local Teak wood35 mm thick shutters |
| 20 | Providing and supplying aluminium extruded tubularand other aluminium sections as per the architecturaldrawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS1474,including super durable powder coating of 60-80microns conforming to AAMA 2604 of required colourand shade as approved by the Engineer-in-Charge. (Theitem includes cost of material such as cleats, sleeves,screws etc. necessary for fabrication of extrudedaluminium frame work. Nothing extra shall be paid onthis account). |
| 21 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :-With float glass panes of 5.5 mm thickness ( weight not less than 13.75 kg / sqm ) |
| 22 | 30mm thick factory made Polyvinyl Chloride (PVC) doorshutter made of styles and rails of a UPVC profilesection of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative moulding edging on oneside. The styles and rails with plastic brackets of size75×220 mm mitred and welded at the corners. Thestyles of the shutter reinforced by inserting galvanisedMS tube of size 25×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVCprofile section of size 30×100 mm and 2 mm ± 0.2 mmwall thickness welded to the shutter style with a UPVCprofile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm ± 0.1mm wall thickness with 20 mm panel beading of suitablesize/Glass (4 mm thick plain glass)/ louver section,louver frame of suitable size, complete as permanufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
| 23 | Providing and fixing factory made P.V.C. door frameof size 50x47mm with a wall thickness of 5mm, madeout of extruded 5mm rigid PVC foam sheet mitred atcorners and joined with 2 Nos. of 150mm longbrackets of 15x15mm M.S. square tube, the verticaldoor profiles to be reinforced with 19×19mm MSsquare tube of 19 gauge, EPDM rubber gasket weatherseal to be provided through out the frame . The doorframe to be fixed to the wall usuing MS screws of65/100 mm size complete as per manufacturers'specification and direction of Engineer-In-Charge. |
| 24 | Providing and fixing aluminium round shape handle ofouter dia 100 mm with SS screws etc. of approvedquality complete as per direction of Engineer-in-charge:-Anodised aluminium of grade AC 15 |
| 25 | Providing and fixing bright finished brass towerbolts(barrel type)with necessary screws etc. complete250 x 10 mm |
| 26 | Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hardwood and well matched teak 3 ply veneering withvertical grains or cross bands and face veneers onboth faces of shutters.35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. |
| 27 | Providing and fixing mirror of superior glass (ofapproved quality) and of required shape and size withplastic moulded frame of approved make and shade with6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 28 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:893115 mm nominal bore |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 30 | Providing and Fixing white vitreous china flat backor wall corner type lipped front urinal basin of430x260x350mm and 340x410x265mm sizesrespectively with automatic flushing cistern withstandard flush pipe and C.P. brass spreaders withbrass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automaticflushing cistern |
| 31 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid |
| 32 | Providing and laying of flexible PVC pipe (conforming toIS:7634) complete including earth work as per specificationand direction of the Engineer - in - charge (cost of fittings will be paid separately). |
| 33 | i)15 mm dia |
| 34 | i)20 mm dia |
| 35 | i)25 mm dia |
| 36 | Providing and fixing G.I. Bend /elbow in the pipe lineincluding testing of joints complete as per CPWDspecification and direction of the Engineer - in - charge. |
| 37 | i. 15 mm dia |
| 38 | ii. 20 mm dia |
| 39 | iii. 25 mm dia |
| 40 | Providing and fixing G.I. Reducer with the pipe line includingtesting of joints complete as per CPWD specification anddirection of the Engineer - in - charge. |
| 41 | 20 x 15 mm dia |
| 42 | 25 x 15 mm dia |
| 43 | 25 x 20 mm dia |
| 44 | Providing and fixing G.I. socket as per CPWD specificationand direction of the Engineer - in - charge. |
| 45 | i. 15 mm dia |
| 46 | ii. 20 mm dia |
| 47 | iii. 25 mm dia |
| 48 | Providing and fitting fixing PVC / plastic bib cock conformingto IS : 9763 in hydrant points at different location as perspecification & direction of the Engineer-in-charge.15 mm dia PVC /plastic bib cock Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender