Tender For Fdr/ Emergency Flood Damage Renovation Work Of Different M.I. Schemes Under The Jurisdiction Of Water Resource Sub-Division Mohanpur During The Year 2026-27. (Job No. Tr/51/2059-Minor Works/Wrd-I/2026-27)
Tender Value
13.96 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
5 days left
EMD
27932
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fdr/ Emergency Flood Damage Renovation Work Of Different M.I. Schemes Under The Jurisdiction Of Water Resource Sub-Division Mohanpur During The Year 2026-27. (Job No. Tr/51/2059-Minor Works/Wrd-I/2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling of pump for over hauiling including greasing, glandpacking, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in- charge.i) For LI |
| 2 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making nacessary electrical connection with main switch/ starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge |
| 3 | Supplying & fitting fixing ball bearing of approved quality for motor required during over haulinga) 6305 Ball bearing (TATA /SKF) |
| 4 | b) 6306 Ball bearing (TATA /SKF) |
| 5 | c) 6309 Ball bearing (TATA /SKF) |
| 6 | d) 6310 Ball bearing (TATA /SKF) |
| 7 | Providing & fitting fixing Shaft sleeve bush of approved quality.a) For LIi) Cast iron (CI) |
| 8 | ii) Stainless Steel (SS) |
| 9 | Providing & fitting fixing Shaft sleeve nut of approved quality.i) Cast Iron (CI) |
| 10 | ii) Stainless Steel (SS) |
| 11 | Providing & fitting fixing C.I. gland of approved quality.i) For LI |
| 12 | Providing & fitting fixing Gland nut /Stag nut 100 mm long for gland of approved quality.i) For LI. |
| 13 | Providing & fitting fixing Lantern Ring for pump of approved quality. |
| 14 | Providing & fitting fixing Casing ring of approved quality.a)150mm dia.i) 8mm thick |
| 15 | Providing & fitting fixing Pump Shaft of approved quality. |
| 16 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved qualityi) 225 mmφ |
| 17 | ii) 190 mmφ |
| 18 | Providing & fitting fixing coupling star bush (All Size) of approved quality.i) 225 mm dia |
| 19 | ii) 190 mmφ |
| 20 | Providing and fixing GI. Pipes Medium class as per IS: 1239 with latest amendmentcomplete with GI. Fittings i/c trenching and refilling,cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer -in- charge.A. External work.i) 150mm dia nominal bore |
| 21 | Providing & fixing of GI . Bend , elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the EIC. i) 150 mm dia |
| 22 | Providing and fitting fixing of M.S. flange ( 8 mm wall thickness) by welding withGI/MS pipe and placing possion as per specification and the direction of the EIC.i) 150 mm dia |
| 23 | Providing & fitting fixing C.I tail piece of approved quality at site of work.i) 150 mm dia |
| 24 | Providing & fitting fixing PVC suction hose pipe of wall thickness 6 mm as per relevent IS specification and direction of EICi) 150 mm dia |
| 25 | Providing & fitting fixing MS foot valve as per relevent IS specification and direction of EICi) 150 mm dia |
| 26 | Providing & fitting fixing MS clamp for hose pipes with nuts and bolts complete as per relevent IS specification and direction of EICi) 150 mm dia |
| 27 | Supplying and fitting fixing of 200mm Amps basber of size 600 x450 x 100 mm with 4 nos copper trips of size 450 x 40 x4 mm of approved quality. |
| 28 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.i) 7/16 Copper Wire |
| 29 | Supplying & fitting fixing kit cut for main & sub-main swich (Male & female) as per direction of the Engineer-incharge.i) 63 Amps main switch |
| 30 | ii) 200 Amps main switch |
| 31 | Supplying and fitting fixing of 3 pole power conductors of different type ,range from 25-300 AC-3 suitable for Fully Automatic Star Delta type Motor startar L&T ,BCH, Havells make as per direction of Engineer-in-Charge.i) Type ML 1.5 |
| 32 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt,L&T/ Havells/BCH make etc complete as per Specification direction of Engineer-in-Charge.i) Current range 63 Amps. |
| 33 | Providing & fitting fixing of Fully Automatic Star Delta type Motor startar ( 3ph, 50 Hz, 415V in steel sheet enclosure with Conductors and Timer etc. complete suitable for motor pump L&T, BCH,ABB make as per Specification direction of Engineer-in-Charge.i) 25HP/18.5 kw Relay range within 13-21 +10% |
| 34 | Providing & fitting fixing of moving iron type Range 0-500v, 96mmx96mm size volt meter (L&T/AE make) with selector switch as a electrical instrument of the pannel board as per Specification direction of Engineer-in-Charge. |
| 35 | Providing & fitting fixing of moving iron type Range 0-100/0-200 amps, 96mm x96mm size Amps meter direct reading type (L&T/AE make) with selector switch and CT coil as a electrical instrument of the panel board as per Specification direction of Engineer-in-Charge. |
| 36 | Demolishing brick work including stacking of serviceablematerialsanddisposal ofunserviceable materialswithall liftsanduptoa leadof 50metc. complete as per direction of the Engineer- in-chargei) In cement mortar |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:i) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brickaggregate 20 mm nominal size) |
| 38 | First class brick work in foundation and plinth including cost of all materials as required complete:i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 39 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 40 | Neat cement punning Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender