Tender For Beautification Work Of The Dr. B. R. Ambedkar Statue At Mahadeva Under The Dr. B. R. Ambedkar Statue Scheme
Tender Value
8.45 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
1 days left
EMD
16914
Bank guarantee accepted
Document Fee
950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gonda → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Beautification Work Of The Dr. B. R. Ambedkar Statue At Mahadeva Under The Dr. B. R. Ambedkar Statue Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work: |
| 2 | Excavation in foundation in ordinary soil as directed by the Engineer-incharges.as per SI.No. 251 |
| 3 | Earthwork in cutting or in embankment in ordinary soil as directed by the Engineer-incharges. as per SI.No. 253 with cartage 2.00 km distance |
| 4 | Foundation concrete 1:6:12 with cement Fine sand and 40 mm Brick ballast in all complete as per PWD SI.No. 273 |
| 5 | Class-150 brick work in 1:4 cement and C/sand of 1.25 fineness modukus mortar in foundation and plinth including supply of all materials labour and tools and plants etc. required for proper completion of work. As per SI.No. 305b |
| 6 | R.C.C. work in 1:2:4 with cement C/sand and 20 mm stone grits. As per SI.No. 284 |
| 7 | R.C.C. work in 1:2:4 with cement C/sand and 20 mm stone grits. As per SI.No. 288 |
| 8 | Mild steel for re-inforcement as per SI.No. 504b |
| 9 | Class-150 brick work in 1:4 cement and C/sand of 1.25 fineness modukus mortar in foundation and supurstructer including supply of all materials labour and tools and plants etc. required for proper completion of work. As per SI.No. 305b+309 |
| 10 | 12mm thick plaster with Cement, C/sand in 1:3 mortar supply of all materials labour T&P etc requried for proper completion of work Sl No. 583 |
| 11 | Supply and Laying of Rubber moulded reflective Zig-Zag 80 mm thick precast compressed CC inter locking block, compressive strength shall not be less that 30 MPA and weight not less that 5.5kg each block including cost of 50 mm thick bedding manfcatured by high pressure and controlled vibration machine having minimum 5 mm thick topping CP Cement Mixed 25% marble powder the compressive strength of concrete paver block as per drawing and confirming IRC-SP-63-2004 including cost all material labour T&P etc. with 3 cm thick beding (cussion) of fine sand and 8 cm depth jointing of interlocking with fine sand and also including filling gap the cost of all material, labour & T&P etc. complete of work (Grey inter locking 32.00 @75% =24 No., Red inter locking 32.00 @25% =8 No./sqm) As per Technical Specification Clause 1504 Sr. No. 6.7 |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR No. 13.80 |
| 13 | One priming coat and two coat of aoil bound distemper on new work including supply of all material labour and T&P etc complete as per SI.No. 649, 650 |
| 14 | Supply and fixing Mild steel iron gate as per SI.No. 503 |
| 15 | Supply and fixing of Mild Steel bench etc complete |
| 16 | Supply and fixing of 9 mtr G.I. Octagonal pole of approved make top dia 70mm,Bottom dia 155mm & Base plate 16mm thick having 3mm thickness with double arm bracket length of 1 mtr length in 1:2:4 RCC foundation bolt including the cost of foundation excavation & back filling and required T&P complete in all respect SI No 21.2.5 |
| 17 | Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect SI.No. 23.26 |
| 18 | Supply and wiring of submains with 2 nos. 2.5sqm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, inclduing supply of all material, labour and T&P etc required for proper completion of the work as directed by Engineer in charge.Same as in item 291 but with 3 nos 4sqmm and 2 nos 2.5 sqmm FRLSH PVC insulated copper conductor cable Schedule 2018 SI No 291B |
| 19 | Supply and wiring of submains with 2 nos. 2.5sqm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, inclduing supply of all material, labour and T&P etc required for proper completion of the work as directed by Engineer in charge.Same as in item 291 but with 3 nos 6sqmm and 1 nos 4 sqmm FRLSH PVC insulated copper conductor cable Schedule 2018 SI No 291D |
| 20 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top On surface the cable run shat be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-in-charge, complete in all respect. The ammouring of the cable shall be properly connected with the earth conductor by clamps etc for 16sq.mm. 4 core.Schedule 2024 SI No.20 a 1.9 |
| 21 | Supoply & fixing capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactor, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. 40 A TPN capacity complete in all respect as per SI.No. 807F(ii. |
| 22 | Supply and burring of safe Earthing ElectrodeT19 (How Dip Galvanized),Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixure (CCM)having anti corrosive&conductive property with 50 kgs activated soil (BFC)capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mmX3mm G.I.strip,upto switch board (from apron to switch board,the cost of G.I.strip will be extra)along with 30cm square C.I.frame with hinged cover&masonry housing.Make:As approved in U.P.P.W.D.,C.P.R.I.Certified.As per SI No.725B |
| 23 | Providing and laying gang saw cut 30mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour, and texture in foothpath, flooring in road side plazas and similar location, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) icnluding grouting the joints with white cement mixed with matching pigment, expoy touch ups etc. complete as per direction of Engineer-in-charge. As per DSR No. 16.87.1 |
| 24 | Providing and fixing inaugration black granite (Polished) 20 mm thick stone size 0.90x0.75 cm. including lettering, printing, border etc will be painted of superior quality is required shade and colour including fixing exavation of foundation (1.40x0.50x0.40cm), P.C.C. 1:6:12 (1.40x0.50x0.15cm), brick work 1:3 cement coarse sand up to G.L. (1.40x0.23x1.35cm), 12 mm thick plaster 1:3 cement coarse sand and finihing walls with water proffing white cement paint of approved make and quality such as super snowcem paint etc. all complete. as per analysis Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender