Tender For Repairs To Plastering, Flooring, False Ceiling, Plumbing, Joinery, Periodical Services & Certain B&R Works Services In Greenfield Area, Sunderban Area Etc In Tech Area At Af Stn Ambala Under Ge (Af) Ambala
Tender Value
60 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
6 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Plastering, Flooring, False Ceiling, Plumbing, Joinery, Periodical Services & Certain B&R Works Services In Greenfield Area, Sunderban Area Etc In Tech Area At Af Stn Ambala Under Ge (Af) Ambala
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs 15 mm bore long body bib tap chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 2 | S&F in repairs 15mm bore long body pillar taps CP brass chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with chromium plated screwed shanks and fly nuts complete screwed for iron pipe complete all as specified and directed. |
| 3 | S&F in repairs 15 mm long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 4 | S&F in repairs 15mm bore long body Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 5 | S&F in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and CP wall hook including making connections and fixed in position complete all as specified and directed. |
| 6 | S&F in repair angle valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 7 | S&F in repair brass chromium plated shower rose 125mm size fixed to pipe complete all as specified and directed. |
| 8 | S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good all connections, complete all as specified and directed. |
| 9 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including P or S trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified as directed. |
| 10 | S&F in repair vitreous china squatting pan orissa pattern size 580X 440mm white with integral foot rest complete including lime concrete(excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete plete all as specified as directed. |
| 11 | S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 12 | S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs complete all as specified and directed. |
| 13 | S&F in repair 15 mm dia Brass CP long shank wall mixer, sink mixer, WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 14 | S&F in repair Soap dish, vitreous China white, aproximate size 160x 160x90mm complete all as specified and directed. |
| 15 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete all as specified and directed. |
| 16 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections complete all as specified and directed. . |
| 17 | S & F in repair 15/20 mm bore in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 18 | S&F in repair CP Grating 100mm dia complete all as specified and as directed. |
| 19 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame exceeding 1.50 Sqm and not exceeding 4 sqm each and removing from site complete all as specified and directed. |
| 20 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame not exceeding 1.50 Sqm each and removing from site complete all as specified and directed. |
| 21 | S&F anodised powder coated aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCOGlass : SAINT GOBAIN/MODI GUARD/TATACHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM |
| 22 | S&F in repair powder coated aluminium partition wall or fixed type window/ventilator made out of aluminium anodised standard hollow section 100 x 44 x 1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etc complete all as specified and as directed. |
| 23 | S&F three track with two or more shutter with 4mm thick tinted glass, one shutter of Stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing , handle lock , rubber beading and glazing clips etc using following aluminium powder coated section conforming to following catalogue of 'JINDAL' or of equivalent make as mentioned in list of makes here-in-after complete all as specified and as directed by Engr-In-Charge(a) Bottom frame 20620 (b) Top frame & vertcal 20621 (c) Handle (side) 20606 (d) Shutter Interlock 20724 (e) Shutter Top & bottom 20844 (f) Glazing clip 19352 |
| 24 | S&F in repairs aluminium ( Die cast ) body door closer hydraulically regulated designation No. 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and. complete all as specified and as directed. |
| 25 | S& F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed. |
| 26 | S& F in repair rubber gasket for packing / beading for aluminum door and window complete all as specified and directed. |
| 27 | S&F in repair 20mm dia powder coated MS curtain rod with require brackets, decorative piece on ends with teak finish appreance etc complete all as specified and directed. |
| 28 | Demolition of of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 29 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exceeding 0.06 but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 30 | M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed. |
| 31 | M&L for vitrified ceramic tiles 10mm thick in light/dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed. |
| 32 | All as per BOQ srl item No 31.00 here-in-above but as in skirting including 10mm thick in cement mortar 1:4 rendering as in backing coat complete all as specified and directed. |
| 33 | Demolition of PCC in ground floor and pavings not exceeding 15 cm thick below or above ground level complete all as specified and directed. |
| 34 | M & L for 100mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded mechanically crushed stone aggregates ) as in sub base of floors complete all as specified and directed. |
| 35 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded mechanically crushed stone aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for PCC (1 : 2 : 4) type B0 using 12.5mm graded mechanically crushed stone agg as in roof kerbs, mud stop, benching, coping, surface channel, padding and the like complete all as specified and directed. |
| 37 | M&L for chequered cement concrete pre polished colour tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry in floor using grey cement with pigment including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed |
| 38 | M&L for prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete, laying over 50 mm thick sand cushioning, with the crushing strength not less than 250 Kg/Sqcm of approved design and shape, complete all as specified and directed |
| 39 | Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern from roof covering complete all as specified and directed. |
| 40 | S&F pre painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified complete all as specified and as directed. |
| 41 | Cleaning of dust Removal of all loose existing bituminous material manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with Highly elastic Bituminous cold applied putty of tarplastic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make of approved by GE cold applied, Bituminous Mortar & Cold Emulsion cum waterproofing Liquid of Shalikote-T-10 or equivalent make of approved by GE, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1 :1 and apply @400gm per Sqm (As per Surface Conditions). . Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. . Lay Geotex of 45 GSM/ Fibre mesh simultaneously and paste it properly with overlap of 50mm. . Allow the first coat to dry for 10 to 12 Hrs. . Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller.. Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm per Sqm.Ensure final curing time of 36 hrs before allowing/ carrying out any further work. Conduct ponding test after min 7 day applying two coats of U V Resistant Elastomeric Exterior Acrylic Weather resistant water proof coating of Shalicryl-215 or equivalent make of approved by GE having elongation of 300% after curing of 14 days confirming to ASTM D- 6083-- for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membranc of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deterioration from sunlight.Note:- Application of water proofing treatment will be done by Authorised Applicator only. |
| 42 | S&F 5 to 10 mm thick colour PVC fluted sheet hollow interlocking wall panelling of width 250 mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion where ever required of matching colour including taking down of existing wall lining, board or insulation board/panelling including cover fillets of any type and thick complete all as specified and as directed.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 43 | S&F fully perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiling using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 44 | Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in cement mortar 1:4 mixed with WPC @ of 3% by wt of cement finished fair & even without using extra cement complete all as specified and directed. |
| 47 | Supply only integral WPC/ complete all as specified and directed. Please Enable Macros to View BoQ information |
| 48 | Supply only integral WPC/ complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender