Tender For Repair/ Maintenance To Tiling, Pcc, Brick Work, Ceiling, Wall Panelling, Sanitary Fittings, Wpc Door Painting Works Including Electrical Works At Rtc Bldg In The Area Of Age E/M (Hosp) Under Ge E/M Lucknow
Tender Value
49 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
3 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Tiling, Pcc, Brick Work, Ceiling, Wall Panelling, Sanitary Fittings, Wpc Door Painting Works Including Electrical Works At Rtc Bldg In The Area Of Age E/M (Hosp) Under Ge E/M Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries from site, complete all as specified and directed. |
| 2 | M&L for non skid ceramic coloured tiles 7-8 mm thick (square or rectangular) polished area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.(Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE) |
| 3 | M&L for for coloured glazed ceramic tiles in vertical surfaces of size 350 x 250 x 7 mm/450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 10 mm thick backing coat in cement mortar (1:3),complete all as specified and directed.(Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE) |
| 4 | M&L for vitrified ceramic tiles 10 mm thick (square / rectangular) polished dark shade, area of each tiles exc 0.42 Sqm but not exceeding 1.00 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.(Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE) |
| 5 | Material and labour 1st quality vitrified outdoor, parking tiles of approved shade, of size 300 mm x 300 mm x 10 mm thick as in floors / path etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | M&L for 20 mm thick granite (of any type) tiles as in floor machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 15 mm thick in cement mortor 1:4, complete all as specified and directed.Note: Design, shade and pattern of fixing of granite shall be as directed and approved by GE. |
| 7 | M&L for 20 mm thick granite (of any type) tiles in skirting/dado machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including backing coat of 10 mm thick in cement mortor 1:3, complete all as specified and directed.Note: Design, shade and pattern of fixing of granite shall be as directed and approved by GE. |
| 8 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 9 | M&L for Brick work with Fly ash old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 confirming to IS 12894, complete all as specified and as directed.. |
| 10 | M&L for Brick work in half brick thick wall with Fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 confirming to IS 12894, complete all as specified and as directed. |
| 11 | M&L for Super heavy series PVC Wall panelling consisting of 5 mm thickwood grain printed PVC sheet of approved coloured & pattern, fixed on walls as per manufactures instruction including dismantling of existing panelling complete all as specified and directed. |
| 12 | S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction. including dismantling of existing ceiling, complete all as specified directed by the Engineer-in-Charge |
| 13 | Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed. |
| 14 | Taking up or down 20 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed. |
| 15 | S&F GI tubing 15mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc), including screwing and waste and for forged bends on piping as required, complete all as specified and as directed. |
| 16 | S&F GI tubing 20mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc), including screwing and waste and for forged bends on piping as required, complete all as specified and as directed. |
| 17 | S&F in repair vitreous china table top Wash Hand Basin of size 500 x 425 x 130 mm with bottle trap, complete all as specified and ditected. |
| 18 | S&F in repair vitreous china wall hung/Floor mounting WC, UF seat close seat cover, hinges, accessories set of size 360 x 580 x 360 mm fixed to wall/floor with P/S trap (one piece) (cascade type) of specified make with including flushing cistern & white seat cover complete all as specified and ditected. |
| 19 | S&F in repair white vitreous China urinal flat back, half stall (Large size) with grating and union for discharge pipe (excluding flushing cistern, flush pipe, and waste pipe, fixed in repairs including connections to flushing pipe and outgoing, complete all as specified and directed. |
| 20 | S&F in repair wall mounted automatic urinal sensor and manual concelled including connections to urinal outgoing water incomming and discharge, complete all as specified and directed. |
| 21 | S&F 15 mm bore 2-way bib cock with flange cast iron with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 22 | S&F in repair 15 mm bib tap long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, short body with flange ,screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 23 | S&F in repairs stop valves 15mm dia (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup complete all as specified and as directed. |
| 24 | S&F in repair 15 mm size Angle cock / valve, cast copper alloy, chromium plated, fancy type with capstan head, with screwed down, screwed both end for iron pipes, complete all as specified and directed. |
| 25 | S&F in repair 15 mm dia of size Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed, any type including all necessary fittings, complete all as specified and as directed. |
| 26 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 27 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 28 | S&F in repairs 600 mm x 450 mm bevelled edge mirror 5.5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers, complete all as specified and directed. |
| 29 | S&F in repairs 6 mm thick bevelled edge mirror of selected quality glass, fixed to wall with stainless steel Bolt flat head mirror screw (minimum 4 Nos per piece) with spacers complete all as specified and directed. |
| 30 | S&F in repairs CP mild steel gratings suitable for 75 / 100 mm dia for Nahani trap/ Floor trap, complete all as specified and directed. |
| 31 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with cement mortar (75 mm bore of pipe) fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 32 | S&F in repairs of tubular towel rail brass chromium plated 20mm dia D type, 600mm long between flange etc with brass screws and wooden/ plastic cleates,complete all as specified and as directed. |
| 33 | S&F in repair 15 mm bore PVC connection with PTMT nuts of length 450 mm.complete all as specified and directed. |
| 34 | S&F in repair 32 mm size flexible pipe of PVC fixed to WHB / urinals as waste pipe (not less than 600mm long) including PVC coupling complete all as specified and directed. |
| 35 | S&F in repair 32 mm size brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed. |
| 36 | S&F in repair 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 37 | S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm,fixed with CP brackets, complete, all as specified and directed. |
| 38 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 39 | S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc curtain rods 22 - 25 mm dia including Knobs and brackets, complete all as specified and directed. |
| 40 | S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass.complete all as specified and directed. |
| 41 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified. |
| 42 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm using excavated soil complete all as specified. |
| 43 | Removing excavated soils not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 44 | M&L for laying of 150 mm bore reinforced cement concrete pipe, class NP-3 with one collar per length of pipe laid in trnches on concrete bed and jointed complete all as specified and directed. |
| 45 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in concrete bed to 150 mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested including demolition of old pipe & PCC bed with haunching and removal of debris complete all as specified and directed. |
| 46 | M&L for plain cement concrete (1:3:6) type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 47 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 48 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 49 | S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed. |
| 50 | S&F 110mm PVC(SWR) bends any radius complete all as specified and directed. |
| 51 | S&F 75mm PVC(SWR) bends any radius complete all as specified and directed. |
| 52 | Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required upto 150 mm bore drain pipe.complete all as specified and directed. |
| 53 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed. |
| 54 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed. |
| 55 | S&F 12 mm thick toughened glass door with or without frosted and decorative as directed of selected quality in single / double leaf door with and including all necessary fixing arrangement like SS clamp / clips, arrangements for fixing of floor spring, SS handle (2 Nos in each leaf), SS lock with locking arrangements etc, including making good the wall surfaces as per existing conditions including taking down of existing unserviceable glass door complete all as specified and directed. Note:- floor spring measured and paid separately. |
| 56 | S&F powder coated aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neoprene rubber beading, PVC packing, partially glazed with 4.8 mm thick tinted glass panes and panelled with 3 mm thick Aluminium composite panel, 150mm tower bolt (1 in each panel), locking arrangements complete all as specified and directed. |
| 57 | S&F aluminium sections powder coated sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, 4.8mm thick heat absorbing glass panes in 2 shutters and 0.46mm dia SS wire mesh in one shutter complete all as specified and directed. (Note :- Thickness of aluminium section minimum 2mm) |
| 58 | S&F aluminium powder coated grill weight of 3.13 Kg per Sqm (min) with suitable aluminium anodized frame of F/H section of 0.297 Kg per Meter (min) with suitable fixing screws / attachment etc complete all as specified and directed. |
| 59 | S&F in repair aluminium powder coated partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 4.8 mm thick frosted glass and partly panelled with 3 mm thick aluminium composite panel including glazing clip, rubber bead, fixed in position as per stander practice complete all as directed by the Engineer-in-Charge. |
| 60 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all complete all as specified and directed. |
| 61 | S&F in repairs Aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed. |
| 62 | S&F in repair 100 mm size mild steel mortice lock, for aluminium door, with 4 brass levers and duplicate key complete all as specified and directed by Engineer-in-Charge |
| 63 | S&F Steel windows or ventilators, fixed type, including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 64 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 65 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 66 | S&F 100 mm size cast brass, with mild steel hinge pin, bright polished and fixed,type B-11 complete all as specified and directed. |
| 67 | S&F 150 mm size Extruded Brass handles, fabricated type, anodised complete all as specified and directed. |
| 68 | S&F 150 mm floor door stopper of aluminium alloy body and tonged, anodised with hard drawn steel spring, complete all as specified and directed. |
| 69 | S&F 250 mm brass, sliding door bolt with sand or dia-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed. |
| 70 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, 150 mm length of bolt, complete all as specified and directed. |
| 71 | Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where complete all as specified and directed. |
| 72 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 73 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes painted one shop coat of of zinc chromate primer paint at Contractor’s workshop before fabrication conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed. Note:- paint item measured and paid separately. |
| 74 | M&L for plates (Plain /Chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde-E-250) complete all as specified. |
| 75 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A). |
| 76 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings,complete all as specified and directed. |
| 77 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 78 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall with L type or J- type or cranked hook bolts and washers in roof, wall etc complete all as specified and directed. |
| 79 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. |
| 80 | M&L for 60 mm thick factory made chamfered edge cement concrete interlocking paver block confirming to IS 15658-2006 of M-35 grade, in gray cement with approved design & pattern / shape laid as in foot path, / hard standing / drive ways or parking etc., made by table vibratory method using PU mould, laid over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed.Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE. |
| 81 | M&L for chequered cement concrete tiles (glossy finish) 300mm x 300mm x 25 mm thick of size, set , jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry @0.3kg/Sqm over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4) complete as per manufacturer instructions and direction.Note: Design, shade and pattern of fixing of chequered tiles shall be as directed and approved by GE. |
| 82 | Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 83 | M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floor/paving/hardstanding ,complete all as specified and directed. |
| 84 | M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the even and smooth, without using extra cement complete all as specified and as directed. |
| 85 | M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing even and smooth, without using extra cement complete all as specified and as directed. |
| 86 | M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 87 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, as plinth protection / path and the like, finished even and smooth without using extra cement all as specified and as directed. |
| 88 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid Frames of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 89 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type shutter of 35mm size for floor or scurting comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with including SS Nails or Screws of required size with necessary full body threaded star headed counter sunk S.S screws and holes fill with filling material, all as per direction of Engineer-In-Charge.Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 90 | Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc,complete all as specified and directed. |
| 91 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.Note:- Waterproofing compound will be measured and paid separately. |
| 92 | M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 93 | Supply only Integral water proofing compound complete all as specified. |
| 94 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (first Quality) over one coat of primer over and including 2 mm thick cement base wall care putty complete all as specified and directed. |
| 95 | M&L for preparation of new plastered surface of walls and applying two coats 100% Premium acrylic emulsion exterior paint over one coat primer including 1 mm thick exterior grade wall care putty, complete all as specified and directed. |
| 96 | M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (first Quality) over one coat of red oxide primer , complete all as specified and directed. |
| 97 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc and applying for preparation of old wall plastered surface and applied two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over 2 mm thick cement based wall care putty complete all as per manufacturer's specification and as directed.Note :- (i) Use of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures without any extra charge. (ii) No jhoola is permitted for the work under any circumstances.(iii) Second coat will only be carried out after 12 Hrs of first coat. |
| 98 | M&L for preparation of old painted surfaces of ceiling by washing, rubbing down & stopping etc, and applying one coat of oil bound distemper (first Quality) of any tint / shade complete all as specified and directed. |
| 99 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and and making good disturbed surfaces of walls , floors etc.complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 100 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and and making good disturbed surfaces of walls , floors etc.complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender