Tender For Repair/ Replacement Of Unserviceable Ci/ Di/ Gi Pipe In Tech Area At Af Station Gurgaon Under Ge (Af) Gurgaon No. 1
Tender Value
30 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
1 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Unserviceable Ci/ Di/ Gi Pipe In Tech Area At Af Station Gurgaon Under Ge (Af) Gurgaon No. 1
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches hard/dence not exc 1.5 mtr wide and not exc 1.5 mtr in depth (for taking up or laying of pipes/cables) and getting out and forming bottom surface to gradient complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 3 | Removing excavated surplus soils to a distance n.exc 50 m and deposited at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Material and Labour for taking down/out unserviceable GI/CI/DI water mains fixed at roof/wall floor/trenches and including disconnecting complete all as specified and as directed of following sizes :- |
| 5 | 15 mm bore |
| 6 | 20 mm bore |
| 7 | 25 mm bore |
| 8 | 40 mm bore |
| 9 | 50 mm bore |
| 10 | 80 mm bore |
| 11 | 100 mm bore |
| 12 | 150 mm bore |
| 13 | Supply and Fix in trenches/withwall/in door floor GI pipe medium grade ISI marked including jointing, testing and fitting (ISI Marked) etc complete all as specified and as directed for the following sizes:- (Excavation and earth work will be measured and paid seperataly) |
| 14 | 15 mm dia nominal bore |
| 15 | 20 mm dia nominal bore |
| 16 | 25 mm dia nominal bore |
| 17 | 40 mm dia nominal bore |
| 18 | 50 mm dia nominal bore |
| 19 | 80 mm dia nominal bore |
| 20 | 100 mm dia nominal bore |
| 21 | Supplying, and laying and testing in trenches, jointing/ connecting and testing 150mm bore ductile iron pipe class 'K-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed. |
| 22 | Supplying, and laying and testing in trenches, jointing/ connecting and testing 100mm bore ductile iron pipe class 'K-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed. |
| 23 | Supplying, and laying and testing in trenches, jointing/ connecting and testing 80 mm bore ductile iron pipe class 'K-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed. |
| 24 | Supplying and fixing in repair Gun - metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed of following sizes:- |
| 25 | 20 mm bore |
| 26 | 25 mm bore |
| 27 | 40 mm bore |
| 28 | 50 mm bore |
| 29 | Material and Labour for cast iron fitting such as Bends, tapers, tee pieces(singe & double bruches) any type and angle/radius and straight connection pieces for water mains upto 150 mm complete all as specified and as directed. (Excavation and earth work will be measured and paid seperataly) |
| 30 | Material and Labour for DI fitting such as Bends, tapers, tee pieces(singe & double bruches) any type and angle/radius and straight connection pieces for water mains upto 150 mm complete all as specified (Excavation and earth work will be measured and paid seperataly) |
| 31 | Repairs to leakage run lead joint in position CI/DI pipes by burning out existing joints,recovering lead, cleaning internal surfaces of socket and providing new joints with using recovered lead and additional new lead, making joint leak proof complete all as specified of following sizes.(Excavation of Earth work shall be measured and paid seperately) |
| 32 | 80 mm bore |
| 33 | 100 mm bore |
| 34 | 150 mm bore |
| 35 | Repairs to leakage run rubber gasket joint for following sizes flanged pipes and fittings including necessary fittings such as bolts, nuts, washers, white lead or mineral oil complete all as specified and directed. |
| 36 | 80 mm bore |
| 37 | 100 mm bore |
| 38 | 150 mm bore |
| 39 | Material and Labour for rectifying leakage of GI pipe line including excavation in mud (not exc 0.7m x0.7mx0.7m) and making arrangement for dewatering by using electric/diesel pump/manual additional labour, taking out existing joint and making joint including providing all GI fittings i.e. socket, tee, elbow , nipples upto 6'' length,GI unions,Reducer (Except GI pipes) complete all as directed for following size of pipe lines:- |
| 40 | 100 mm bore. |
| 41 | 80 mm bore. |
| 42 | 50 mm bore. |
| 43 | 40 mm bore |
| 44 | 25 mm bore. |
| 45 | 20 mm bore. |
| 46 | 15 mm bore. |
| 47 | Material and Labour for drilling hole under hardstanding / road in different location as per site requirement (between 03 metre to 12 metre ) for laying GI /CI pipe by mean of T&P and without disturbing the top surfaces and making good disturbed surfaces with existing material (if any ) complete all as specified and as directed. |
| 48 | Material and labour for cutting of existing CI/GI pipe line of size 150mm/100mm dia bore (supply main) and making connection by inserting CI Tee/CI collar etc and connecting to new GI Pipe line 50mm dia complete all as specified and directed.Note :- Run lead joint, excavation earth work, CI specials measured and paid for separately) |
| 49 | Material and labour for brick masonry valve pit of size 90cms x 90cms x 100cms (internal dimensions of chamber) depth to be reckoned from the top of PCC foundation to top of MS cover as shown on drgs with MS sheet cover 3 mm thick including frame of angle iron 40mm x 40mm x 6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (Internal and external) and necessary excavation and earth work in any type of soil returning, filling in disposal of surplus spoil to a distance not exc. 50 metres, 15cm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for base all as specified and shown in TD drawing. Note:- Drawing for wall pit can be seen in office of GE/ CWE. |
| 50 | Supply and Fix in replacement of cast iron sluice valves ( ISI) marked with flanged ends drilled with iron wheel head with shut and open direction class PN - 1.6 confirming to IS - 14846/ 2000 incl rubber insertion packing ring with nuts bolts washer jointing material of size 150 mm dia complete all as specified and directed. |
| 51 | Supply and Fix in replacement of cast iron sluice valves ( ISI) marked with flanged ends drilled with iron wheel head with shut and open direction class PN - 1.6 confirming to IS - 14846/ 2000 incl rubber insertion packing ring with nuts bolts washer jointing material of size 100 mm dia complete all as specified and directed. |
| 52 | Supply and Fix in replacement of cast iron sluice valves ( ISI) marked with flanged ends drilled with iron wheel head with shut and open direction class PN - 1.6 confirming to IS - 14846/ 2000 incl rubber insertion packing ring with nuts bolts washer jointing material of size 80 mm dia complete all as specified and directed. |
| 53 | Supply and Fix in replacement of cast iron non return valve (ISI) marked including rubber insertion packing ring with nuts bolts washer jointing material of size 80 mm dia complete all as specified and directed. |
| 54 | Supply and Fix in replacement of cast iron non return valve (ISI) marked including rubber insertion packing ring with nuts bolts washer jointing material of size 100 mm dia complete all as specified and directed. |
| 55 | Supply and Fix in replacement of cast iron air release valve with twin air outlet 80mm dia bore suitable to be fixed in 100 dia DI Pipe flanged ends with flanged pipes 80mm dia of suitable length rubber insertion packing rungs nuts washers and jointing material of 100 mm dia. complete all as specified and directed. |
| 56 | Material and Labour for writing work on RCC overhead tank at an height of not more than 4 mtr with synthetic enamel paint of black colour in bold letters of size height of letter/digit 20 cm and wide as per lettering practice. all as directed by Engineer - in- charge incl prepration of surface, white painting of surface approximately 3 sq mtr. matter of writing such as (A) Date of cleaning with date in Digit, (B) capacity of Tank with capacity in Digits, (C) Location of Tank etc complete all as specified and directed. |
| 57 | Material and Labour for cleaning of RCC over head tank of 50000/ 60000 gallon capacity at 50 feet staging by removing all deposite materials like sand etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats including marking the date of cleaning on the tank with black synthetic enamel paints complete all as speciied and directed. |
| 58 | Material and Labour for cleaning of RCC under ground sumps tanl upto 50000 gallon capacity at staging by removing all deposite materials like sand etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats including marking the date of cleaning on the tank with black synthetic enamel paints complete all as speciied and directed. |
| 59 | Cleaning, grass cutting and removing of dust, raw materials of sourrounding area of STP/Pump house installation including surface dressing complete all as specified and directed. |
| 60 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender