Tender For Attending Special Repairs Of 30 Ton Capacity Steel Barge Of Size 12.00 X 4.50 X 1.60 M Stationed At Pbhc, Sri Vijaya Puram.
Tender Value
54.42 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
20 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Attending Special Repairs Of 30 Ton Capacity Steel Barge Of Size 12.00 X 4.50 X 1.60 M Stationed At Pbhc, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Site preparation for fabrication of pontoon, facilitating the smooth launching of the pontoon upon completion of fabrication, at locations near the Beachout Area / permissable areas/ other approved locations and access routes for shifting and handling MS materials using engaged equipments, as directed by EIC. The rate shall include all costs towards hire charges of excavators, major and minor T&P, labour, transportation, GST, LWC, etc., complete. |
| 2 | Beaching of the 30 Ton Cap. Pontoon beyond the highest water level (preparing the site for smooth beaching of barge by providing the sufficient gradient, clearing all foreign materials from the site, bailing out of inside sea water etc. ) by using the multiple sleeve pulley wire rope arrangement using the hitachies as a power source to pull the barge, providing sufficient timber rollers in bottom side through out the width of barge, hauling the barge to the required position incluiding cost of all labour charges, cost of minor tools & plants, the hire charges of wire rope,multiple pulleys, D shackles, Jacks, LWC and GST etc., complete but excluding the hire charges of power source to pull the barge in to shore which will be paid separately . |
| 3 | Lifting the Pontoon to a height of not less than 90 cm packing the pontoon with proper size of timber beams/steel stand and jack arrangements. The rate is inclusive of all labour charges, hire charges of jacks and other tools and plants, LWC and GST etc., complete. |
| 4 | Providing and laying timber cushion for the bottom plate of barge with standard hard wood in various sizes as per actual requirement at site and as per the instruction of EIC, after lowering the barge,the site is to be cleared immediately by removing the timbers/rubbish/garbage etc.The timber cushion are to be laid properly in layers longitudinally and cross wise as per the requirement for placing the bottom plate of the barge without any deviation. The timber provided for the cushion shall be got approved by the EIC.The work involves supply and transportation of timber, cutting & sizing into suitable length, loading and unloading, placing beneath bottom plate, hire charges of truck etc., complete.. The rate is inclusive of LWC and GST but excluding the hire charges of power source to push the barge in to water which will be paid separately. |
| 5 | Removing the water and sand deposit from the compartment of barge by using pump, cleaning the compartment by removing dust mud and other foreign materials, checking and assessing the condition of structural members. The rate is inclusive of all labour charges, minor tools and plants, exhaust fans, lifting arrangements, GST, LWC etc. complete. |
| 6 | Cutting and removing the damaged shell plate, structural members of 30 ton Pontoon by gas cutting to facilate the fitment of new steel section as per the original dimension, transportation of scrap steel sections to the department store including the cost of all labour charges,gas cutting materials and hire charges of gas cutting equipment , GST LWC etc. complete. |
| 7 | Supply of IRS Tested/Stamped certificate of MS Plates and MS Angles and other steel structures as per specification, quantities including cost of materials, transportation upto worksite, loading/unloading charges, wharfage charges, IRS charges, all taxes & duties, GST, LWC etc., complete. |
| 8 | MS Plate 8 mm thick, (IS 2062 E250A) |
| 9 | MS Plate 10 mm thick, (IS 2062 E250A) |
| 10 | MS Angle 75 x 75 x 8 mm, (IS 2062 E250A) |
| 11 | MS Flat 75 X 8 mm (IS 2062 E250A) |
| 12 | MS Channel 150 x 75 x 8 mm (IS 2062 E250A) |
| 13 | M. S. Plain Rod 40 mm Dia (54 Rmt) |
| 14 | Attending repairs/fabrication of Barge structural members, shell plate, bulk head plate etc. with out any deviation from original shape by cutting & bending the plates, welding to the original structure through vertical and horizontal joints of double welded butt construction on either side with V- groove by using BIS approved welding rods and IRS approved / equivalent RO's certified welders by using IRS approved MS plates, M.S Angles, M.S Rods, T-frame,channels,etc. as per the instruction of E I C. Removing all the dust and scales from the newly fabricated steel section and applying one coat of synchromate primer of approved quality, including cost of IRS approved steel Sections, hire charges of welding set, gas plant, surface grinder, buffing tools, cost of paint brushes, current charges, all port charges, all labour charges, LWC and GST, etc complete. The welding should be carried out as per specification by engaging IRS approved / equivalent RO's certified welders and the fabrication / repair works shall be carried out under the inspection of IRS and EIC. (Cost of IRS engagement will be paid seperately) |
| 15 | Removing all scales and dust, de-greasing the surface and there after attending painting to the Barge by applying one coat IRS approved marine quality Primer paint Orange Colour. The rate is inclusive of all labour charges, IRS approved paints, painting materials, scaffolding materials, chipping hammer, wire brush and other minor T&P GST, labour welfare cess etc., complete. (Inside surface only). |
| 16 | Removing all mild scale and rust, de-greasing the surface by pickling in dilute hydrochloric acid and painting to the Pontoon by applying one coat IRS approved primer paint and theafter two coat IRS approved marine quality black paint (or other colour as decided by the EIC) with thinner over the entire outer surface steel pontoon. The rate is inclusive of all labour, IRS approved marine quality paints, painting materials, scaffolding materials, chipping hammer, wire brush minor tools and plants, GST, labour welfare cess etc., complete. (Outer surface). |
| 17 | Providing and fixing of accessories like old u/s truck tyre fenders (minimum 8 nos.) all around the pontoon, hanging with G.I chain at suitable position as per the direction of EIC. The rate is including cost of u/s truck tyres, transporting, cost of G.I. chain 16mm, D-Shackle etc. or any other items required the the work, cost of all labour charges for making holes other minor T&P, GST and LWC etc. complete. |
| 18 | Lowering the pontoon from the wooden packing, seating the same over the wooden/steel rollers, launching the bargeby step by step, checking the leakage if any etc. and towing the barge & berthing the barge at safer place at jetty. The rate is inclusive of all labour charges, hire charges of jacks, pulleys, wire rope and other T & P to & fro transportation of all materials to work site but excluding the hire charges of power source to push the barge in to water which will be paid separately.The rate is including LWC and GST. |
| 19 | Engagement of Hitachi/Excavator for assisting the beaching / launching operation. The rate is inclusive of hire charges of hitachi ,POL, Operator's cost , transportation charges etc.complete. The rate is including LWC and GST. Please Enable Macros to View BoQ information |
| 20 | Engagement of Hitachi/Excavator for assisting the beaching / launching operation. The rate is inclusive of hire charges of hitachi ,POL, Operator's cost , transportation charges etc.complete. The rate is including LWC and GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender