Tender For Nabard-Fidf - Development Of Arthungal Fishing Harbour- Balance Work-Electification Of Toilet Block-General Electrical Work
Tender Value
3.39 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
6 days left
EMD
8491
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nabard-Fidf - Development Of Arthungal Fishing Harbour- Balance Work-Electification Of Toilet Block-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrification Work |
| 2 | 1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 3 | 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B |
| 4 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C |
| 5 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 6 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 7 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 8 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 9 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 10 | 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm |
| 11 | 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 12 | 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 13 | 1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 14 | 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 15 | 1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 16 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 17 | 1.34:Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 18 | 1.49:Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required. |
| 19 | OD6209/2026-2027:Supplying and fixing following way, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, with PE+N terminals, thermoplastic circuit breaker boxes IP65 with metric knock out for cable entry, 1 row 12 module size 295x333x129 or nearest suitable size with PE+N terminals including earthing etc. as required. (But without MCB/RCCB/Isolator) 1 row 12 module with PE+N terminals complete as required. |
| 20 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 21 | 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 22 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 23 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 24 | 5.3:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. |
| 25 | 5.14:Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 26 | 5.13:Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 27 | 5.17:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 28 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). |
| 29 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels |
| 30 | 90.3.18.3:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat |
| 31 | 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. |
| 32 | 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 33 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 34 | 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. |
| 35 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 36 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 37 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 38 | OD6210/2026-2027:Supply and installation of wall mounting cubicle type metering board made of thermoplastic Polycarbonate energy meter enclosure with hinged lid 600 x 400 x 230 mm , IP66 IK10 with base plate for fixing KSEB meter, cut out & Neutral link and 32A , 10kA DP MCB, C curve , with sufficient holes for fixing KSEB electronic energy meter, cut outs and neutral link. Supply and providing 1No 32A,10kA ,DP MCB C curve ,-1 No 32A HRC fuse units with 32A HRC fuse link - 1No 32A 2way neutral link in the meter portion-1No . Necessary holes are to be provided in the box for entry and exit of wire. The inter Connection should be done using 4sq.mm copper wire complete as required at site . |
| 39 | OD5448/2024-2025:Supplying and fixing of heavy duty, totally enclosed, continuously rated, capacitor start and run, single phase, 230/240 V, 50 Hz, 300 mm sweep, 1400 RPM exhaust fan with 4 metal blades, conforming to IS:2312, having minimum air delivery of 1710 m³/hr, including cutting hole in wall and making good the damage, connection with flexible wire, testing and commissioning etc. complete with suitable extra louvers / shutters and fixing accessories complete as required. |
| 40 | OD5449/2024-2025:Supply and providing 25x6 mm brass bolt and nut with washers on the existingMS box / earth bus etc. as required including drilling necessary holes as required |
| 41 | OD5683/2024-2025:Supplying, fixing, testing and commissioning of self-ballasted, energy efficient LED retrofit lamp suitable for 230 V, 50 Hz single phase AC supply, with B22d bayonet cap base, high power factor (PF > 0.90), minimum luminous efficacy of 100 lumens/watt, correlated colour temperature (CCT) of 6500K (Cool Day Light), conforming to IS:16102 (Part 1 & 2), in existing batten / angle lamp holder etc. complete as required. |
| 42 | OD6351/2024-2025:Supplying, installation, testing and commissioning of surface / wall / ceiling mounted, weatherproof and dustproof 10 W LED Bulkhead luminaire with high-pressure pressure die-cast aluminium housing, UV-stabilized, impact-resistant polycarbonate opal diffuser/optic, complete with integral electronic control gear/driver suitable for 230 V, 50 Hz single phase AC supply, having an ingress protection rating of IP66, impact resistance of IK08 or IK09, system luminous flux of not less than 1100 lumens, system luminous efficacy of minimum 110 lumens/watt, Correlated Colour Temperature (CCT) of 6500K (Cool Daylight), Colour Rendering Index (CRI) > 80, power factor (PF)> 0.90, THD < 10%, surge protection of minimum 2.5 kV / 4 kV, and complete with all standard mounting accessories, neoprene/silicone rubber gasket, stainless steel (SS 304/316) external hardware, cutting hole in wall/ceiling and making good the damage where necessary, connection with suitable flexible copper conductor cable, earthing etc., complete as required. |
| 43 | OD6182/2026-2027:Supply ,Installation, testing and commissioning of pre - wired, weather proof LED luminaire IP65 rated having power consumption of 34 /40 W and light output not less than 2100 lm with system efficiency >120 lumens/watt. Luminaire housing made from superior quality of polycarbonate extrusion IP65 and and IK 08 protection. The luminaire should be having minimum 30000 Burning hours with CRI >=80 and co related colour temperature(CCT)of 6500K. of all types, complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 44 | OD5450/2024-2025:Providing and fixing 12 SWG (2.50 mm dia) insulated G.I. wire along with existing / proposed service connection, including binding, clipping / taping, tensioning, fixing with suitable accessories, clamping, making good the damages etc., complete as required. |
| 45 | OD5451/2024-2025:Liaison work and statutory documentation charges for obtaining Low Tension (LT) / High Tension (HT) electric service connection / load enhancement from KSEB Ltd., including preparation of necessary single line diagrams (SLD), scheme drawings, route sketches, connected load statement, completion certificate in prescribed format, submission of online/offline applications through KSEB OrumaNET portal, coordination with Section / Sub-Division / Division offices of KSEB Ltd., and obtaining power feasibility and final energisation sanction etc., complete as required.(Note: Statutory application fees, security deposits, and KSEB demand note charges shall be reimbursed / paid separately against original receipts). |
| 46 | Civil Work |
| 47 | 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender