Tender For Special Repair To Bldg No P-121, P-121/Bw, P-120 Bcd Of Cmdc (Cc) Under Ge E/M Lucknow
Tender Value
38.78 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
9 days left
EMD
77560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-121, P-121/Bw, P-120 Bcd Of Cmdc (Cc) Under Ge E/M Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 2 | M&L for Brick work with Fly ash old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.. |
| 3 | M&L for Brick work in half brick thick wall with Fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed. |
| 4 | Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 5 | M&L for rendering 15mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces incl mixing only water proofing compound as per manufacturers instructions and finiching the surface even and smooth without using extra cement complete all as specified. Note:- Waterproofing compound will be measured and paid separately |
| 6 | M&L for rendering 15mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces incl finiching the surface even and smooth without using extra cement complete all as specified. |
| 7 | M&L for 5 mm thick rendering in cement and sand mortar 1:3 (as per manufacturers instruction) on ceiling, chajja, roof projection and facia surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 8 | Supply only water proofing compound of approved quality complete all as specified and directed. |
| 9 | M&L for preparation of new wall plastered surface and applying two coats of 100% Premium acrylic emulsion paint, having colour stay technology and VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directedNote:- Rate included for necessary scaffolding and arrangements for working up to 25 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 10 | M&L for preparation of new wall plastered surface and applied two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over 1 mm thick cement based wall care putty complete all as per manufacturer's specification and directed. |
| 11 | M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed. |
| 12 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc and applying for preparation of old wall plastered surface and applied two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over 1 mm thick cement based wall care putty complete all as per manufacturer's specification and as directed.. |
| 13 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc and applying two coats of 100% Premium acrylic emulsion paint, having colour stay technology and VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over on including 1mm putty applied surfaces of walls, primer & paint shall be applied by air less spray machine (Mechanical means) complete all as specified & directed.Note:-(i) Rate included for necessary scaffolding and arrangements for working up to 25 m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures. |
| 14 | M&L for Preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 15 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping holes and applying one coat of synthetic enamel paint (first Quality), complete all as specified and directed. |
| 16 | M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint (first Quality) (up to 25 mtrs height), complete all as specified and directed. |
| 17 | Demolition of stone slab of any description / thickness in floors, aprons etc including cement mortar bedding laid bedded and pointed in any mortar, complete all as specified and directed. |
| 18 | M&L 20-25 mm thick machine cut Kota stone slab flooring with marble stone strips as per approved design , laid over and including cement screed bed 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.Note: Design, shade and pattern of fixing of kota stone shall be as directed and approved by GE. |
| 19 | M&L for 20-25 mm thick machine cut Kota stone slab as in skirting / riser laid over and including cement rendering 10 mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete all as specified and directed.Note: Design, shade and pattern of fixing of kota stone shall be as directed and approved by GE. |
| 20 | M&L for 20 mm thick granite (of any type) tiles as in floor machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including screed bed 20 mm thick in cement mortor 1:6, complete all as specified and directed.Note: Design, shade and pattern of fixing of granite shall be as directed and approved by GE. |
| 21 | M&L for 20 mm thick granite (of any type) tiles in skirting/dado machine cut & machine polished, set & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including backing coat of 10 mm thick in cement mortor 1:4, complete all as specified and directed.Note: Design, shade and pattern of fixing of granite shall be as directed and approved by GE. |
| 22 | M&L for chequered cement concrete tiles (glossy finish) 300mm x 300mm x 25 mm thick of size, set , jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry @0.3kg/Sqm over and including 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete as per manufacturer instructions and direction.Note: Design, shade and pattern of fixing of chequered tiles shall be as directed and approved by GE. |
| 23 | Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 24 | M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floor/paving/hardstanding ,complete all as specified and directed. |
| 25 | M&L for plain cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops or similar work rounded or chamfered on edges complete all as specified and as directed. |
| 26 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. |
| 27 | M&L for 60 mm thick factory made chamfered edge cement concrete interlocking paver block confirming to IS 15658-2006 of M-35 grade, in gray cement with approved design & pattern / shape laid as in foot path, / hard standing / drive ways or parking etc., made by table vibratory method using PU mould, laid over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed.Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE. |
| 28 | M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (first Quality) over one coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 30 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed. |
| 31 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. |
| 32 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings,complete all as specified and directed. |
| 33 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 34 | Excavation in post holes (or similar holes) in soft/loose soil each n exc 0.5cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 35 | Demolition of existing roof treatment of any type, including screed bed etc complete all as specified and directed. |
| 36 | M&L for 15 mm thick rendering in cement mortar 1:3 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed.(Note:- WPC will be measured and paid separately) Please Enable Macros to View BoQ information |
| 37 | M&L for 15 mm thick rendering in cement mortar 1:3 over RCC roof slab including mixing only water proofing compound as per manufacturer instruction complete all as specified and directed.(Note:- WPC will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender