Tender For Special Repair Of Bldg No P-517 (Batra Block) Of Transit C Under Ge 865 Ews
Tender Value
75.55 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
25 days left
EMD
1.38 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No P-517 (Batra Block) Of Transit C Under Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 2 | M&L for 10mm thick rendering on other than fair faces of stone wall work finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and/or as directed by Engr-in-Charge. |
| 3 | M&L for 10mm thick rendering on other than fair faces of stone wall work finished even and smooth without using extra cement in cement mortar 1:4, complete all as specified and/or as directed by Engr-in-Charge. |
| 4 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:4), complete all as specified and/or as directed by Engr-in-Charge. |
| 5 | Supply only integral liquid water proofing compound. |
| 6 | M&L for 1mm thick wall care putty, complete all as specified and/or as directed by Engr-in-Charge. |
| 7 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting, complete all as specified and/or as directed by Engr-in-Charge. |
| 8 | M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 1mm and rubbing with sand paper for making smooth surface and applying two coats of oil emulsion distemper over one coat of primer through roller, complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | M&L for preparation of old surface after complete removal of existing treatment by mechanical, complete all as specified and/or as directed by Engr-in-Charge. |
| 10 | M&L for one coat of priming on wall with alkali resisiting priming paint using roller, complete all as specified and/or as directed by Engr-in-Charge. |
| 11 | M&L for two coats of OBD using roller for painting, complete all as specified and/or as directed by Engr-in-Charge. |
| 12 | M&L for preparation of complete removal of existing treatment on plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth finishing walls and applying acrylic smooth exterior paint of required shade (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting, complete all as specified and/or as directed by Engr-in-Charge. |
| 13 | Dismantling wall and ceiling boards (fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and/or as directed by Engr-in-Charge. |
| 14 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding, complete all as specified and/or as directed by Engr-in-Charge. |
| 15 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding, complete all as specified and/or as directed by Engr-in-Charge. |
| 16 | M&L for prelaminated particle board,18/19 mm thick both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and/or as directed by Engr-in-Charge. |
| 17 | Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc. under 40 sqcm in section unframed work, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc. 13 sqcm and not exc. 25 sqcm in section, complete all as specified and/or as directed by Engr-in-Charge. |
| 19 | M&L for 2nd class soft wood clean sawn as in beeding for edges of ceiling, lining or wooden flooring work fixed with nails exc. 6 sqcm and not exc. 13 sqcm in section, complete all as specified and/or as directed by Engr-in-Charge. |
| 20 | M&L for covered fillets of standard hard board not less than 6mm thick and upto 40mm wide and fixing with screws, complete all as specified and/or as directed by Engr-in-Charge. |
| 21 | S&F piano/continuous hinge of size 40 mm (when open) stainless steel, complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (but not backing ) and rubbish off premises, complete all as specified and/or as directed by Engr-in-Charge. |
| 23 | M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor, complete all as specified and/or as directed by Engr-in-Charge. |
| 24 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 set and jointed in neat cement slurry and pointed in colour cement to match, complete all as specified and/or as directed by Engr-in-Charge. |
| 25 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:4) as in floors etc., complete all as specified and/or as directed by Engr-in-Charge.Make : Johnson (Daisy SF/Gloria SF) or equivalent from Kajaria/Somany as approved by GE. |
| 26 | S&F coloured glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4) joint free with grout of matching shade complete, complete all as specified and/or as directed by Engr-in-Charge. |
| 27 | Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 28 | M&L for precast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate, complete all as specified and/or as directed by Engr-in-Charge. |
| 29 | All as per Srl item No 28.00 above but except blocks. |
| 30 | Demolition of cement concrete in ground floor and pavings not exc. 15cm thick below or above ground level, complete all as specified and/or as directed by Engr-in-Charge. |
| 31 | M&L for cement concrete type B-2, 1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors, sub-bases, floors and pavings, etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 32 | M&L for chequered cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments, laid over 20mm thick cement screed base (1:6), complete all as specified and/or as directed by Engr-in-Charge. |
| 33 | M&L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth without using extra cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | M&L for forming contraction (dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and/or as directed by Engr-in-Charge. |
| 35 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area not exc. 1.5 sqm each, complete all as specified and/or as directed by Engr-in-Charge. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each, complete all as specified and/or as directed by Engr-in-Charge. |
| 37 | S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 38 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 39 | S&F anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100mm long (02 Nos) suitable handle (01 No) etc. including powder coated anodised aluminium frame, grill with one or more rebates, complete all as specified and/or as directed by Engr-in-Charge. |
| 40 | M&L for sheet glass 4.8mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane, complete all as specified and/or as directed by Engr-in-Charge. |
| 41 | S&F 2nd class soft wood 35 mm thick glazed and skelton shutter, open and prepared to receive the glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately), complete all as specified and/or as directed by Engr-in-Charge. |
| 42 | S&F for 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, S&F to chowkats, complete all as specified and/or as directed by Engr-in-Charge. |
| 43 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification, complete all as specified and/or as directed by Engr-in-Charge. |
| 44 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement as per specification, complete all as specified and/or as directed by Engr-in-Charge. |
| 45 | M&L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 46 | S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and/or as directed by Engr-in-Charge. |
| 47 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and/or as directed by Engr-in-Charge. |
| 48 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete, complete all as specified and/or as directed by Engr-in-Charge. |
| 49 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and/or as directed by Engr-in-Charge. |
| 50 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and/or as directed by Engr-in-Charge. |
| 51 | S&F in repair aluminium (die cast) body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg, complete all as specified and/or as directed by Engr-in-Charge. |
| 52 | S&F floor door stopper (length of cover plate) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, complete all as specified and/or as directed by Engr-in-Charge. |
| 53 | S&F 100mm long aluminium anodized, butt hinges of extruded section, complete all as specified and/or as directed by Engr-in-Charge. |
| 54 | S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and/or as directed by Engr-in-Charge. |
| 55 | S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and/or as directed by Engr-in-Charge. |
| 56 | S&F, mortice lock, brass, four lever, verticle type, size 75mm, complete all as specified and/or as directed by Engr-in-Charge. |
| 57 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc. laid bedded and pointed in any mortar, complete all as specified and/or as directed by Engr-in-Charge. |
| 58 | M&L for kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and ploishing and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6, complete all as specified and/or as directed by Engr-in-Charge. |
| 59 | All as per Srl item No 58 above but on vertical surface and including backing coat of mortar 15mm thick in CM 1:4. |
| 60 | M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc. and screed bed with CM (1:4) 20mm thick laying floor tiles, complete all as specified and/or as directed by Engr-in-Charge. |
| 61 | Dismantling water tank exc. 500 ltr and not exc. 1000 ltr and removing to store. |
| 62 | S&F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked (cylindrical vertical type/rectangular loft type closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc.), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 1000 ltrs capacity, complete all as specified and/or as directed by Engr-in-Charge. |
| 63 | S&F in repair 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and/or as directed by Engr-in-Charge. |
| 64 | S&F 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair, complete all as specified and/or as directed by Engr-in-Charge. |
| 65 | S&F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and/or as directed by Engr-in-Charge. |
| 66 | Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and/or as directed by Engr-in-Charge. |
| 67 | Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and/or as directed by Engr-in-Charge. |
| 68 | S&F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacturer's instructions, complete all as specified and/or as directed by Engr-in-Charge. |
| 69 | S&F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacturer's instructions and as directed by Engineer in Charge) |
| 70 | S&F in repairs viterous china squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti symphonage pipe etc., complete all as specified and/or as directed by Engr-in-Charge. Make : Cera/Jaquar or equivalent as approve by GE. |
| 71 | S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs, excluding hinges, lock strike plate, etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 72 | S&F steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovatiled or welded (glass shall be measured seperately), complete all as specified and/or as directed by Engr-in-Charge. |
| 73 | S&F in repair 15mm dia angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes, complete all as specified and/or as directed by Engr-in-Charge. |
| 74 | S&F PVC connectons 15 size with PTMT nuts (length 600mm), complete all as specified and/or as directed by Engr-in-Charge. |
| 75 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and/or as directed by Engr-in-Charge. |
| 76 | S&F in repair vitreous china wash basin fancy type pedestal pattern, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and/or as directed by Engr-in-Charge. |
| 77 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and/or as directed by Engr-in-Charge. |
| 78 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing, complete all as specified and/or as directed by Engr-in-Charge. |
| 79 | S&F in repair sheet glass basin shelf assembly consisting of 8mm thick glass shelf 600 x 150mm wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing, complete all as specified and/or as directed by Engr-in-Charge. |
| 80 | S&F in repair chromium plated fancy pillar tap 15 mm dia, complete all as specified and/or as directed by Engr-in-Charge. |
| 81 | S&F in repairs 750 mm long, 32/ 40 mm dia, PVC flexible waste pipe for sinks / wash hand basins, complete all as specified and/or as directed by Engr-in-Charge. |
| 82 | S&F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (half or full threaded) (minimum weight 45 gram), complete all as specified and/or as directed by Engr-in-Charge. |
| 83 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and/or as directed by Engr-in-Charge. |
| 84 | S&F MS rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors; fixed with angle cleats or other connecting plates and similar work conforming to Fe-290, Gde-E-165, complete all as specified and/or as directed by Engr-in-Charge. |
| 85 | M&L for preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 86 | S&F in repair 19mm dia mild steel, chromium plated curtain rods fancy type, with brackets, end bulbs, complete all as specified and/or as directed by Engr-in-Charge. |
| 87 | S&F in repairs soap dish chromium plated fancy type, complete all as specified and/or as directed by Engr-in-Charge. |
| 88 | S&F in repairs towel rail 600mm long chromium plated (minimum weight 190 gms), complete all as specified and/or as directed by Engr-in-Charge. |
| 89 | S&F in repairs towel hanger with 6 Nos of pin and 600mm long chromium plated etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 90 | Dismantling of cast iron, PVC or reinforced concrete drain pipes, 75/110/150/200 mm dia, jointed in cement mortar and taking out of trenches, if required, complete all as specified and/or as directed by Engr-in-Charge. |
| 91 | S&F in repairs 110 mm bore PVC (SWR) single socleted in any length with rubber rings joints, fixed to walls and vent pipe, complete all as specified and/or as directed by Engr-in-Charge. |
| 92 | S&F in repairs 110 mm bore PVC (SWR) bends of any radius, complete all as specified and/or as directed by Engr-in-Charge. |
| 93 | S&F in repairs 75 mm bore PVC (SWR) bends of any radius, complete all as specified and/or as directed by Engr-in-Charge. |
| 94 | M&L for PVC (SWR) 75 mm dia floor trap with plain grating including jointing with solvent cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 95 | S&F grating doom 75mm dia of PTMT (min weight 25 gms), complete all as specified and/or as directed by Engr-in-Charge. |
| 96 | S&F in repairs, 10 litre capacity PVC valveless symphonic action type, flushing cistern (ISI marked), low level, white, with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC, 32mm dia, for low level cistern, complete all as specified and/or as directed by Engr-in-Charge. |
| 97 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and/or as directed by Engr-in-Charge.Make : Cera/Jaquar/Hindware. |
| 98 | S&F in repair curved shape urinal partition with frosted glass of 8-10mm thick (chamfer) of size 900 x 450 mm fixed wall including all acessories, complete all as specified and/or as directed by Engr-in-Charge. Cat Part No JSE-CHR-810UC450X. |
| 99 | Roughning surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 100 | Cutting out cracks to V section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and/or as directed by Engr-in-Charge. |
| 101 | M&L for brushing neat cement slurry with 3.0 Kg of cement/sqm, complete all as specified and/or as directed by Engr-in-Charge. |
| 102 | M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in floor finished even and fair without using extra cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 103 | M&L for 20 mm thick bedding layer in CM 1:4, complete all as specified and/or as directed by Engr-in-Charge. |
| 104 | M&L for priming surfaces and applying normal treatment (for moderate condition) for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforcement with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including preparation of new surface of membrane and applying two coats of alumminium paint, complete all as specified and/or as directed by Engr-in-Charge. |
| 105 | Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc. and getting out in soft soil, complete all as specified and/or as directed by Engr-in-Charge. |
| 106 | M&L for returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick, complete all as specified and/or as directed by Engr-in-Charge.Note : Surplus soil if any shall not be removed but left over the trench. |
| 107 | M&L for removing surplus soil to a distance not exc. 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and/or as directed by Engr-in-Charge. |
| 108 | M&L for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable, complete all as specified and/or as directed by Engr-in-Charge.Note : For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in Para 19.75 of SSR Part-I. |
| 109 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete all as specified and/or as directed by Engr-in-Charge. |
| 110 | Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead, complete all as specified and/or as directed by Engr-in-Charge for the followings:- |
| 111 | One light/exhaust fan point controlled by one way switch. |
| 112 | One switch socket outlet 6 Amps, 230 volts point on same board. |
| 113 | One switch socket outlet 6 Amps, 230 volts point on independent board. |
| 114 | All as per Srl item No 110.00 above, but using cables 4.00 sqmm size. |
| 115 | Supply and replacement of switch piano flush button single pole 6 Amps 230 volts one way, complete all as specified and/or as directed by Engr-in-Charge. |
| 116 | Supply and replacement of switch socket out let two in one 5 pin 6 Amps flush type 230 volts, complete all as specified and/or as directed by Engr-in-Charge. |
| 117 | Supply and replacement of switch socket combination outlet multi purpose 5 pin 6 Amps and 16 Amps 230 volts, complete all as specified and/or as directed by Engr-in-Charge. |
| 118 | Supply and replacement of ceiling rose, surface bakelite three terminals, complete all as specified and/or as directed by Engr-in-Charge. |
| 119 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 way, complete all as specified and/or as directed by Engr-in-Charge. |
| 120 | S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 08 way, complete all as specified and/or as directed by Engr-in-Charge. |
| 121 | S&F in replacement of MCB SPN 63 Amps 240 Volts, 50 Hz AC, 'C' series, complete all as specified and/or as directed by Engr-in-Charge. |
| 122 | S&F in replacement of MCB SPN 6-32 Amps 240 Volts 50 Hz AC, 'C' series, complete all as specified and/or as directed by Engr-in-Charge. |
| 123 | Taking down u/s submain wiring of any size. |
| 124 | M&L for submain wiring alongwith earth wire with the following sizes of FRLSH insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping wire size 2x10.0 sqmm + 1x10.0 sqmm earth wire, complete all as specified and/or as directed by Engr-in-Charge. |
| 125 | S&F only in replacement 4' x 1' LED light fitting 32 Watt, 220 V, AC surface mounted box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and/or as directed by Engr-in-Charge. |
| 126 | S&F LED light fitting 1x9W / 1X10W bulk head luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size, complete all as specified and/or as directed by Engr-in-Charge. |
| 127 | S&F in repair 4 way double door Tripple Pole Neutral vertical load line Distribution Board suitable for flush mounting and suface mounting with 250 A copper bus bar with neutral bars and earth bars with including MCCB 160 TPN as incomer and SP/TP MCBs as outgoing and making good disturbed surfaces of walls, floors, etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 128 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc. complete all as shown in electrical plate No 3, complete all as specified and/or as directed by Engr-in-Charge. |
| 129 | Supply, install, testing complete water heater, storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipes etc., complete all as specified and/or as directed by Engr-in-Charge.Note : Old geyser retrieved from site should be deposited to MES store. |
| 130 | S&F in replacement of exhaust fan any type and size with plastic body 300 mm sweep including taking down the existing unserviceable exhuast fan and making necessary arrangements for fixing of plastic body 300 mm sweep and connecting with flexible three core cable from the ceiling rose, complete all as specified and/or as directed by Engr-in-Charge.Note : Old exhaust fan retrieved from site should be deposited to MES store. |
| 131 | M&L for removing all existing connection like inlet/outlet pipe, bracket, gate valves, connection line from FCU keeping it in safe custody and refixing the same post completion of all works, complete all as specified and/or as directed by Engr-in-Charge. |
| 132 | Supply & laying in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of cross sectional area 50 sqmm 3.5 core, complete all as specified and/or as directed by Engr-in-Charge. |
| 133 | M&L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other, complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender