Tender For Providing High Mast Lighting Through Underground Cable In The Parking And Community Centre Near Mata Rani Temple In Sarangpurat U.T. Chandigarh.
Tender Value
14.64 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
29300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing High Mast Lighting Through Underground Cable In The Parking And Community Centre Near Mata Rani Temple In Sarangpurat U.T. Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, erection, testing & commissioning of High Mast based on the following parameters/ requirements of the Deptt. AS PER COMPLETE ITEM NO.1 OF DNIT. |
| 2 | FOUNDATION FOR 12.5 MTR. LONG HIGH MAST & POLES:Design & casting of foundation with M20cement Concrete & steel reinforcement suitable for installation of high mast: |
| 3 | DSR ITEM NO. 2.8.1 (CIVIL WORK)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. |
| 4 | All kinds of soili.(Size3.5mx3.5mx1.6m=19.60cum(3Nos.x19.60=58.80cum) |
| 5 | DSR ITEM NO. 4.1.11 (CIVILWORK)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering–All Work upto plinth level: |
| 6 | 1:5:10 (1 cement: 5 fine sand derived from natural sources: 10 graded stone aggregate 40mm nominal size derived from natural sources) (3.3mx3.3mx0.10m=1.089cum.)(3Nos.x1.089=3.267cum) |
| 7 | DSR ITEM NO. 5.22.6 (CIVIL WORK) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 8 | Thermo Mechanically Treated bars of grade Fe500D or more [email protected].=103.16kg2. VerticalBar12mmdia=24nos.x1.995=47.88 r.mtr. @0.89 kg permtr.=42.61kg3. Horizontal Ring 8mm dia= 9nos. x 3.792 = 34.12 r.mtr. @ 0.390kg permtr. = 13.30kgTotal(103.16+42.16+13.30=159.07+5%wastage=167.02kg)(3Nos.x167.02=501.06Kg) |
| 9 | DSR ITEM NO. 5.2.2 (CIVIL WORK) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 10 | 1:1.5:3 (1 cement: 1.5 coarse sand (zone III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from nautral sources) including manufactured sand derived A.Size3.100x3.100x0.300=2.88 cumSize 1.000x1.000x1.400 = 1.40 cum Total(2.88+1.40=4.28cum.)(3Nos.x4.28=12.84cum) |
| 11 | DSR ITEM NO.5.9.1 (CIVILWORK)Centering and shuttering including strutting propping etc and removal of form for: |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete Size 1x2 (3.100+3.100) 0.45 = 5.58 sq.mtr.Size 1x2 (1.400+1.400) 1.000 =5.60 sq.mtr.Total (5.58+5.60= 11.18 sq.mtr.) (3 nos. x11.18= 33.54) |
| 13 | S/I/T/C of Single dome integral LED aviation light comprising of aluminum housing with polycarbonate enclosure to be installed on existing High mast pole at a height up to 12/ 16 Mtrs. Approx. including making necessary connections, testing and commissioning etc. to the entire satisfaction of Engineer In Charge. The fitting should be of IP-65. The LED aviation light should be of Bajaj/ Transrail/ Surya or its equivalent make only. |
| 14 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 15 | Single pole |
| 16 | Triple pole and neutral |
| 17 | DSR Item No.5.2Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 18 | DSR Item No. 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 19 | DSR item no.5.12Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 20 | DSR Item No. 5.4Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Set 6216 |
| 21 | DSR item No. 5.9Supplying and laying of 25 mm x 5mm G.I. strip at 0.50 metre below ground level as strip earth electrode ,including connection/termination with G.I. nut bolt, spring ,washer etc. as required ( jointing shall be done by overlapping and with 2 set of G.I. nut bolt and spring washer spaced at 50 mm). |
| 22 | DSR Item No.15.15 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 23 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 24 | Labour charges for horizontal boring 1 Mtr. Below ground level including cost of 2 Nos. Pit digging and refilling complete in all respects upto entire satisfaction of the EIC of the work. |
| 25 | DSR Item No 15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. Complete as required. |
| 26 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 27 | Supply and Laying of following XLPE insulated and PVC sheathed, armored, aluminum conductor cable of 1.1KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in DWC/GI/Hume/ pipe as required at site. The job include the cost of making connections with suitable size of Al. Lugs/ thimbles, testing, commissioning etc. as required to the entire satisfaction of Engineer In Charge. The cable should of be Polycab / Havells / Finolex / RR Kabel/ KEI/ RPG/ Universal make only. |
| 28 | Size 16 Sq.mm 4 core PVC Al. Arm. Cond. Cable |
| 29 | Size 35 Sq.mm 3.5 core PVC Al. Arm. Cond. Cable |
| 30 | DSR item no.8.16 LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt) Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size andCCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). |
| 31 | 250 WATT |
| 32 | Supply and erection of sheet metal cubical pedestal of suitable dimensions made from 50 mm X 50 mm X 6 mm thick M.S angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides and front side hinged complete with locking arrangement with 4 Nos. switchgear supporting members each of M.S. flat 50 mm X 6 mm thick of suitable length duly welded. The cubical pedestal shall have 4 Nos. legs of 50 mm X 50 mm X 6 mm each 60 cm long M.S. angle iron each long including painting, bonding to the existing earth etc. the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15cm high form ground level and 45 mm thick. The cubical pedestal shall be 15 cm from the top of cement concrete platform. |
| 33 | Cubical size 1200 mm X 900 mm X 350 mm |
| 34 | DSR item no.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 35 | 100 A,30KA,FPMCCB |
| 36 | DSR Item No 7.4 Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 37 | 1 output per phase and suitable for single phase supply |
| 38 | Supply and erection of Contactor T AC3 70 AMP RATING AND 100 AMPS RATING FOR AC1 unit suitable for 3 phase switching on/off. The job includes cost of 1 no. 3 phase MNX 70 CS97076 with built in SURGE SUPPRESSOR for coil of 220 Volt 50/60 Hz Rating L&K MNX/ Siemens 3TF/ ABB AX series. The contactor shall be installed on existing bakelite sheet with help nut and bolt. The job includes making incoming and outgoing connection with suitable copper wire and other petty material require to complete the job to the entire satisfaction of Engineer- in- charge. |
| 39 | DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/ Isolator). |
| 40 | 4 way (4 + 12), Double door |
| 41 | DSR item no.16.83 (Civil 2023) Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 42 | DSR item no.16.84 (Civil 2023) Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer incharge. (Old CC paver blocks shall be supplied by the department free of cost). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender