Tender For Fabrication, Erection, Testing, Calibration, Etc. For Fixed (Cone) Roof Storage Tanks In Connection With Tankage Work For Lube Modernization & Bottom Upgradation (Lmbu) Project Of Hpcl, Mumbai Refinery, India
Tender Value
6.78 Crore
Estimated cost
Bid Submission
26 Oct 2026
2 days left
EMD
14.76 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Erection, Testing, Calibration, Etc. For Fixed (Cone) Roof Storage Tanks In Connection With Tankage Work For Lube Modernization & Bottom Upgradation (Lmbu) Project Of Hpcl, Mumbai Refinery, India
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Oct-2026 | CORRIGENDUM-1 | Technical Bid | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Tankage Work for Lube Modernization & Bottom Upgradation (LMBU) Project of HPCL, Mumbai Refinery, India” |
| 2 | EQUIPMENT - STATIC |
| 3 | STORAGE TANKS |
| 4 | PLATE W ORK |
| 5 | Plate work for Fixed Roof Tanks (Cone and Dome roof tanks) and covered Floating Roof tanks except Floating Roof: Unloading of raw materials (i.e., plates, structural steel materials, etc.) from trucks/trailers to the B and R Fabrication Yard located outside the refinery premises (i.e., at Kalamboli, Navi Mumbai), fabrication and transportation of fabricated tank components or raw material from the B and R Fabrication Yard (located outside the refinery premises at Kalamboli, Navi Mumbai) to HPCL Mumbai Refinery, Mahul, followed by unloading at the project site, erection of shell, bottom (Sketch plates and annular plates including backing strips), cone roof, Dome roof, compression ring/knuckle plate, plate fabricated wind girders, wind girder opening, bearing plates for pipe supports, datum plates, shell manhole- necks, bolting and cover flanges for shell-manholes, reinforcement pads for shell manholes, nozzle reinforcing pads, roof manhole-necks, bolting and cover flanges for roof manholes, reinforcing pads for Roof manholes, clean-out door assembly (including davit assembly), gusset- support for wind girders, Sump for drain nozzle, pads for all appurtenances and attachments, fabrication and installation of all items as per drawing, conducting tests such as vacuum test, MP/DP test, pneumatic test, oil penetrant examination, Grouting work (including the supply of grouting material, as required for the tanks installed on ring wall foundation) underneath the Annular/ bottom plate as per the specifications attached, tank hydrotest, etc. for shell, bottom and roof as specified, all heat treatment specified in drawings/ specifications/ codes, standards and relevant codes and getting the same reviewed by Owner/EIL, providing all temporary structures, clamps, wedges, including arrangement of all materials, consumables, labour, equipment, machinery, tools, tackles etc. to complete the work in all respects as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. |
| 6 | IS 2062 Gr. E250 (A, BR, B0, C) |
| 7 | SA 516 Gr. 60/ 70 with NACE + HIC |
| 8 | SA 537 Cl.1 |
| 9 | INSTALLATION OF EDUCTOR ASSEMBLY For Item tag 203-TK-1001 |
| 10 | Contractor to install the Eductor assembly and all its accessories / components as per the Eductor Process Data Sheet & Tank Mechanical Data Sheet. Refer PDS No : B800-203-79-41-DS-1908 |
| 11 | STRUCTURAL/PIPES |
| 12 | STRUCTURAL/ PLATE WORK: Unloading of raw materials (i.e., plates, structural steel materials, etc.) from trucks/trailers to the B and R Fabrication Yard located outside the refinery premises (i.e., at Kalamboli, Navi Mumbai), fabrication and transportation of fabricated tank/structural components from the B and R Fabrication Yard (located outside the refinery premises at Kalamboli, Navi Mumbai) to HPCL Mumbai Refinery, Mahul, followed by unloading at the project site, erection, inspection and testing of steel structure for cone roof/ dome roof supporting structure including curb angle, spiral stairway, cage ladder, handrail, top and intermediate platform, grating for stairway steps and platform, rolling ladder including track for floating roof, anchor chairs, name plates, earthing connections, ladder rungs for ladders in covered roof tanks, wind girder fabricated from rolled section, wind girder bracings/ support, external structural supports, supports for shell extension for foam nozzles in case of floating roof tanks, stiffeners for shell extension plate of stairway, ventilation slots and over flow slots for covered floating roof tank including SS wire mesh, arrangement of all materials, consumables, labour, equipment/ machinery, tools and tackles required to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials shall be supplied by Contractor except FIM. |
| 13 | Roof structure as per Standard/Drg. |
| 14 | IS 2062 |
| 15 | STILL W ELLS/ DIP PIPES: Fabrication, erection, inspection and testing of still well for gauge hatch, still well for level transmitter/ level switches, still well for temperature element including flanges on all still wells, dip pipes (process / instrumentation), pipe fittings, drilling of holes in still well/ dip pipes, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in- Charge. All materials to be supplied by Contractor except FIM. |
| 16 | SA 106 Gr. B |
| 17 | SS TP 316L |
| 18 | STRUCTURAL PIPES (CS GALVANISED): Fabrication, erection, inspection and testing of pipe specification for pipe handrails (CS and galvanised), arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor except FIM. |
| 19 | PIPES(CS GALVANIZED) |
| 20 | APPURTENANCES |
| 21 | Fabrication, installation, welding, heat treatment, inspection and testing as required for the following nozzles (reinforcing pads covered under plate work) pipe, nozzle flanges and blind / companion/matching flanges (including davit/ hinge assembly for Man way) wherever shown on drawings and standards along with gaskets and boltings including conducting air pressure test for reinforcing pads, getting the same reviewed by Owner/EIL, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer-in- Charge. |
| 22 | Roof Nozzle 150 Class W NRF Type 3 Inch SizeSA 105 Material |
| 23 | Roof Nozzle 150 Class W NRF Type 2 Inch SizeSA 105 Material |
| 24 | Roof Nozzle 150 Class W NRF Type 6 Inch SizeSA 105 Material |
| 25 | Shell Nozzle 150 Class W NRF Type 2 Inch SizeSA 105 Material |
| 26 | Shell Nozzle 150 Class W NRF Type 3 Inch SizeSA 105 Material |
| 27 | Shell Nozzle 150 Class W NRF Type 6 Inch SizeSA 105 Material |
| 28 | Shell Nozzle 300 Class W NRF Type 3 Inch SizeSA 105 Material |
| 29 | Shell Nozzle 300 Class W NRF Type 16 Inch SizeSA 105 Material |
| 30 | Shell Nozzle 300 Class W NRF Type 8 Inch SizeSA 105 Material |
| 31 | Roof Nozzle 300 Class W NRF Type 1.5 Inch SizeSA 105 Material |
| 32 | Roof Nozzle 300 Class W NRF Type 2 Inch SizeSA 105 Material |
| 33 | Roof Nozzle 300 Class W NRF Type 4 Inch SizeSA 105 Material |
| 34 | Roof Nozzle 300 Class W NRF Type 6 Inch SizeSA 105 Material |
| 35 | Roof Nozzle 300 Class W NRF Type 8 Inch SizeSA 105 Material |
| 36 | Shell Nozzle 150 Class W NRF Type 8 Inch SizeSA 105 Material |
| 37 | Shell Nozzle 300 Class W NRF Type 4 Inch SizeSA 105 Material |
| 38 | Roof Nozzle 300 Class W NRF Type 3 Inch SizeSA 105 Material |
| 39 | Shell Nozzle 300 Class W NRF Type 2 Inch SizeSA 105 Material |
| 40 | Roof Nozzle 150 Class W NRF Type 20 Inch SizeSA 105 Material |
| 41 | Shell Nozzle 300 Class W NRF Type 10 Inch SizeSA 105 Material |
| 42 | Shell Nozzle 300 Class W NRF Type 20 Inch SizeSA 105 Material |
| 43 | Roof Nozzle 150 Class W NRF Type 16 Inch SizeSA 105 Material |
| 44 | Shell Nozzle 300 Class W NRF Type 6 Inch SizeSA 105 Material |
| 45 | Man way (Shell/ Roof with forged flanges) 150 ClassW NRF Type 24 Inch Size SA 105 Material |
| 46 | Man way (Shell/ Roof with forged flanges) 300 ClassW NRF Type 24 Inch Size SA 105 Material |
| 47 | GOOSE NECK VENT W ITH W IRE MESH: Fabrication, installation, welding, heat treatment, inspection and testing as required for the (reinforcement pads covered under Plate work) goose neck vent with wire mesh (SS 304 as minimum) for the following vent materials. |
| 48 | Size 6 Inch Material SA 106 Gr. B |
| 49 | Size 8 Inch Material SA 106 Gr. B |
| 50 | Size 10 Inch Material SA 106 Gr. B |
| 51 | CALIBRATION: Carrying out calibration of tanks including supply of strapping tapes, scaffolding wherever required, arranging the visit of competent authority, all accessories, labour, preparation and submission of calibration charts duly approved by Competent authority etc. and complete the work in all respect as per Codes, specifications, standards and instructions of Engineer-in-Charge |
| 52 | Diameter (Meters) : upto 10 Height (Meters) : upto 10 |
| 53 | Diameter (Meters) : > 10 to 25 Height (Meters) : > 10 |
| 54 | MIXER |
| 55 | Installation of Propeller Mixer in position as per instruction of Engineer-in-Charge /Supplier. |
| 56 | Nozzle Size > 10 to 20 Inch |
| 57 | Nozzle Size up to 10 Inch |
| 58 | Nozzle Size > 20 to 30 Inch |
| 59 | INSTALLATION OF EMERGENCY VENT: Installation of Emergency Vent etc. to the satisfaction of the Engineer- in Charge |
| 60 | 16 Inch of MOC CS |
| 61 | 20 Inch of MOC CS |
| 62 | 24 Inch of MOC CS |
| 63 | PICKLING & PASSIVATION OF STAINLESS STEEL TANKS: Pickling & Passivation of all internal and external surfaces of tank shell, roof, bottom plate and all associated components/ appurtenances for the tanks mentioned in Drawings/ specifications including the arrangement of all the required materials, consumables, labour, equipment, scaffolding, machinery , tools & tackles etc. to complete the work in all respects as per Drawings, Specifications, Standards, Codes, Scope of work, Scope of Supply and instructions of Engineer-in-Charge. |
| 64 | Slot Dipping Device: Installation of \\"Slot Dipping Device\\" for the tankages mentioned in the data sheets/ drawings/ specifications as per the Specifications & Standards attached with the tender. Arrangement of machinery, tools & tackles, labour etc. to accomplish the installation of the same shall also be in the scope of Contractor |
| 65 | Size: 6 Inch Material: CS |
| 66 | \\"NOTE:-THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST.\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender