Tender For Detailed Estimate For Repair And Maintanance Work In R&T Factory Colony Nahan.
Tender Value
6.51 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
6 days left
EMD
32500
Bank guarantee accepted
Document Fee
708
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Detailed Estimate For Repair And Maintanance Work In R&T Factory Colony Nahan.
BOQ
| Sl. No. | Item Description |
| 1 | Providing wood work in frames of doors, window , clerestory, window and other frames wroght, frames and fixed in position including carriage of material in all leads and lifts. (a) lvory cost teak wood. |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face vaneers on both faces of shutters including carriage of material in all leads & lifts. 35 mm thick including ISI marked stainless steel but hinges with necessary screws. |
| 3 | Providing and fixing wire gauge shutters using galvanized M.S wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory window with hinges and necessary screws: including carriage of material in all leads and lifts 35mm thick shutters with ISI marked M.S pressed but hinges bright finished of required size second class teak wod. |
| 4 | Providing and fixing glass panes, with wooden fillets wherever necessary including carriage of material in all leads and lifts. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material in leads and lifts. (110mm nominal Size) |
| 6 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rain water pipes by mean of 50x50x50mm hard wood plugs, screwed with M.S screws of required length , including cutting bricks work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand ) and making good the wall etc.complete including carriage of material in all leads and lifts. (110mm) |
| 7 | Providing and fixing plain bend of required degree including carriage of material in all leads and lifts. Sand cast iron S&S as per IS : 3989 (110 mm nominal size) |
| 8 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material in all leads and lifts. (110 mm nominal size) |
| 9 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material in all leads and lifts. (110 mm nominal size) |
| 10 | Providing and fixing collar including carriage of material in all leads and lifts. (110 mm nominal size) |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fitting & C.I brackets, 40mm flush bend overflow arrangment with specials of standards make and mosquito proof coupling of approved municipal design complete, including painting of fitting and braskets, cutting and making good the walls and floors wherever required including carriage of matrial in all leads and lifts. W.C pan with ISI marked white solid plastic seat and lid. |
| 12 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm dia including carriage of material in all leads and lifts. (Long Body) |
| 13 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of material in all leads and lifts.( 15mm nominal bore) |
| 14 | Providing and fixing G.I./M.I. Union of following sizes (Where not included in the items). Including carriage of material in all leads and lifts.( 15mm nominal bore) |
| 15 | Repair to plaster to thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints, and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish all complete as per direction of Engineer-in-Charge, including carriage of material in all leads and lifts. |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering and finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work including carriage of material in all leads and lifts. |
| 18 | Suspended floors, roofs, landings, balconies and access platform. |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level / above plinth level including carriage of material in all leads and lifts. |
| 20 | 15 mm cement plaster on the fair side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) including carriage of material in all leads and lifts. |
| 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts. |
| 22 | Providing and fixing at all height false ceilling of 4mm thick phenol bonded bamboo mat board (595x595mm) conforming to IS: 13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3) mm thick for main member & 25x25x0.3 mm for cross member ) connected to celling with 2.64mm G.I wire and anchor fastner at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 23 | Poviding and fixing cup board shutters with 25mm thick veneered particle board IS:3097 marked , exterior grade (Grade I) , of approved make, including II nd class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charges including carriage of material in all leads & lifts. With decorative veneering on one side and commercial veneering on other side. |
| 24 | Add 10% FOR INTERNAL INSTALLATION Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender