Tender For Providing And Fixing Of Full Height Aluminium Partition For Lab At Stp-2 Up To Ceiling Height At Iit Ropar
Tender Value
2.48 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
5 days left
EMD
4965
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Full Height Aluminium Partition For Lab At Stp-2 Up To Ceiling Height At Iit Ropar
BOQ
| Sl. No. | Item Description |
| 1 | For shutter of doors, windows & ventilators including providing and fixing hinges. pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Fittings shall be paid for separately |
| 2 | Powder coated aluminium (minimum thickness of powderocating 50 micron) |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neorene gasket etc complete as per thearchitecutral drawings and the directions of Enginner in-charge. (Cost of aluminium snap beading shall be paid in basic items. |
| 4 | With float glass panes of 5.00mm thickness (weight not less that 12.5 kg/sqm) |
| 5 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 6 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. Complete |
| 7 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. |
| 8 | 250 x 16mm |
| 9 | Providing and fixing aluminum tower bolts ISI marked anodised (anodic coaing not less than grade AC 10 as per IS : 1868) tranpaent or dyed to required colour or shade with necessary screws etc. complete. |
| 10 | 250 x 10mm |
| 11 | Providing and fixing aluminium handing floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transpared or dyed to required colour and shade with necessary screws. Complete |
| 12 | Twin rubber stopper |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): |
| 14 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 15 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixedin aluminum doors, windows shutters and partition frames with C.P. brass / tainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. |
| 16 | Pre-laminated particle board with decorative lamination on both sides |
| 17 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/masonry, etc. as per direction of Engineer-in-charge. |
| 18 | 10 x 80mm |
| 19 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/masonry, etc. as per direction of Engineer-in-charge. |
| 20 | 10 x 120mm |
| 21 | Sliding roller for making sliding arrangement of aluminium doors |
| 22 | Providing and fixing sliding roller set (double nylon wheels with bearing) suitable for aluminium sliding door track, including necessary fixtures, alignment, testing, andmaking proper sliding arrangement of aluminium doors, complete as per site condition and direction of Engineer-in-Charge |
| 23 | Providing and fixing ICE Cube film on existing glass panes of doors and windows, including cleaning of glass surface, cutting to size, pasting with adhesive without air bubbles or wrinkles, and finishing neatly, complete in all respects as per manufacturer’s specification and direction of Engineer-in-Charge |
| 24 | Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 25 | 125mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender