Tender For Deposit-Waste Treatment Facilities In Medical Colleges-Necessary Civil/Electrical Works For Diversion Of Waste To Stp At Govt. Medical College Manjeri.-Electrification-General Electrical Work
Tender Value
1.56 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
4 days left
EMD
3907
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Waste Treatment Facilities In Medical Colleges-Necessary Civil/Electrical Works For Diversion Of Waste To Stp At Govt. Medical College Manjeri.-Electrification-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Motor Reconditioning |
| 2 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 3 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 4 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 5 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 6 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 7 | 1.17.24:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm |
| 8 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 9 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 10 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 11 | 90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet |
| 12 | OD116044/2026-2027:Supply, providing and fixing 63A, 415V, 4Pole, 23A ON Load COS the existing panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 13 | OD116077/2026-2027:Supply and fixing LED indication lamp for all voltage ranges- Red, Green, Blue, Yellow, colour in existing panel and giving connection etc as required |
| 14 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 15 | OD116078/2026-2027:Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipment's including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 4Sqmm single run |
| 16 | OD87582/2026-2027:Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipment's including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5 Sqmm single run |
| 17 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 18 | OD319352/2025-2026:Disconnecting 5 HP motor from base and dismantling the motor from the foundation, cleaning and attending minor repairs, if necessary, cleaning and greasing the bearings with good quality grease, heating the coil, reassembling, test running including scrapping, cleaning and painting with enamel paint and refitting the motor to base after work. and correcting the suction pipe and delivery pipe with additional out let for testing etc as per the derction of department staff. |
| 19 | OD85364/2026-2027:Disconnecting 7.5 HP motor from base and dismantling the motor from the foundation, cleaning and attending minor repairs if necessary, cleaning and greasing the bearings with good quality grease, heating the Coil, reassembling, test running including scrapping, cleaning and painting with enamel paint and refitting the motor to base after work. |
| 20 | OD316596/2025-2026:Supply and replace bearing No. 6206 SKF/FAG Equivalent |
| 21 | OD316597/2025-2026:Supply and replace bearing No. 6308 SKF/FAG Equivalent |
| 22 | OD85378/2026-2027:Supply and replace bearing No. 6310 SKF/FAG Equivalent |
| 23 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 24 | OD310896/2025-2026:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 25 | Plumbing works |
| 26 | 50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 27 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 28 | OD310442/2025-2026:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90 mm dia 6Kgf/cm2 - External work- Exposed on wall |
| 29 | OD310447/2025-2026:Providing and fixing PVC pipes including fixing the pipe with clamps/steel rope inside septic tank as outer filter pipe with 20mm holes in it as per direction of Engineer-in-Charge 160 mm dia 6Kgf/cm2 This included jointing of pipes with one step PVC solvent cement and testing of joints complete |
| 30 | 50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend |
| 31 | 50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow |
| 32 | 50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee |
| 33 | OD310441/2025-2026:Providing and fixing PVC Union 63mm |
| 34 | OD310443/2025-2026:Providing and fixing ball valve of approved quality, 63mm PVC |
| 35 | OD310446/2025-2026:Supply and fixing PVC fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63mm PVC Male Threaded Adapter (MTA) |
| 36 | 50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend |
| 37 | OD310448/2025-2026:Supply and fixing PVC fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75mm PVC Foot valve |
| 38 | OD310449/2025-2026:Supply and fixing PVC fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75mm PVC Male Threaded Adapter (MTA) |
| 39 | OD327103/2025-2026:Fabricating and installing M.S. coupling flanges using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, threading, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete for 75mm PVC pipe using MTA/accessories |
| 40 | OD310444/2025-2026:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -90x63 mm dia Reducer |
| 41 | OD310445/2025-2026:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 90x90x90 mm dia single Y |
| 42 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender