Tender For Providing Partition Works For Establishing A Secure Printing Facility For Degree Certificates, Other Certificate Forms, And Answer Books In Examination B Section (Room No. 307), Administrative Building, Cusat Thrikkakara C Us
Tender Value
6.93 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
10 days left
EMD
17400
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Partition Works For Establishing A Secure Printing Facility For Degree Certificates, Other Certificate Forms, And Answer Books In Examination B Section (Room No. 307), Administrative Building, Cusat Thrikkakara C Us
BOQ
| Sl. No. | Item Description |
| 1 | Partition Work |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including thecost of EPDM rubber/ neoprene gasket required (Fittings shall be paid forseparately)Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination onboth sides |
| 5 | Providing and fixing 12 mm thick approved quality Hylam sheet/phenolic laminatedsheet of required shade and finish, in panelling fixed in aluminium doors, windows,shutters, racks, partitions or frame work with C.P. brass / stainless steel screws, nuts,bolts, washers and necessary fittings complete, including cutting, drilling and fixingas per architectural drawings and directions of Engineer-in-Charge. Hylam sheet shallbe industrial grade, moisture resistant and laminated finish on both sides. |
| 6 | Providing and fixing 12 mm thick WPC (Wood Plastic Composite) board of approvedmake and quality, having density in the range of 0.75-0.85 g/cm³ (750-850 kg/m³),moisture resistant, termite and borer proof, with smooth decorative laminated finishon both sides, for covering cupboards/panelling fixed to aluminium or other approvedframework using suitable C.P. brass / stainless steel screws, washers, approvedadhesives and necessary fixing accessories complete, including cutting, drilling,grooving, edge finishing and all incidental works complete, as per approved drawingsand directions of Engineer-in-Charge. |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness (weight not less than 12.50 kg/sqm) |
| 8 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade, with necessary screws etc. complete:125 mm |
| 9 | Providing and fixing aluminium extruded section body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), withdouble speed adjustment with necessary accessories and screws etc. complete. |
| 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed torequired colour and shade, with necessary screws etc. complete.Single rubber stopper |
| 11 | Providing and fixing approved make high-security biometric digital door lock foraluminium framed glass/aluminium doors of make such as Godrej Locks, Yale Home,Hafele India, Ozone Overseas, Dormakaba or approved equivalent, with fingerprint,PIN, RFID card and mechanical key access, including auto-lock facility, tamper/wrong-attempt alarm, emergency power backup, lock body, strike plate, batteries, accessories, fittings, fixing, testing and commissioning complete as directed by Engineer-in-charge. |
| 12 | Engaging Mancoolie Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender