Tender For Tubewell Drilling, Restoration & Execution Of Civil Works For Energisation At Genguti - Iii T.W. L.I.Project Under Baleshwar Sadar Block In Baleshwar District.
Tender Value
16.69 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
9 days left
EMD
16691
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tubewell Drilling, Restoration & Execution Of Civil Works For Energisation At Genguti - Iii T.W. L.I.Project Under Baleshwar Sadar Block In Baleshwar District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge. |
| 2 | Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge. |
| 4 | Fly Ash Brick masonary in CM (1:6) in F& P |
| 5 | Brick work with Fly Brick 25cm x 12cm x 8cm size having croshing strength not less than 100kg/cm2 to149kg/cm2 with dimensional tolerrance± 8% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge. |
| 6 | 2.5cm thick DPC in cement concrete (1:2:4)with 12 mm HGCB |
| 7 | 12mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge. |
| 8 | Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Chargea)Coloumn base & gread beam,plinth bend etc |
| 9 | b) Chhaja & Slab |
| 10 | c )Lintel |
| 11 | R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge. |
| 12 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete. |
| 13 | Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge. |
| 14 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge. |
| 15 | Wall painting two coats with approved paint over a coat of wall cement primer of approved shade after cleaning the surface with watering, curing, cost, conveyance royalties & taxes of all materials & labour T&P required for the work etc. complete |
| 16 | Labour Charges for fitting and fixing the Iron Door & window in proper position & properly |
| 17 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete. |
| 18 | 2.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips. |
| 19 | 2.5 cm. thick grading concrete (1:2:2 ) on roof slab with 6mm size h.g chips on new work with all cost etc. complete . |
| 20 | Cost of M.S. Pannel Iron Door with M.S.Frame etc (size 1.0 mx1.98m) & window |
| 21 | Distempering two coats to walls with distermper of approved shade on new work to give an even shade including cost of distemper & labour etc. complete. |
| 22 | Finishing walls with water proofing cement paint of approved shade on new work ( 2 coats ) to give an even shade including cost of cement paint & labour etc complete. |
| 23 | Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete. |
| 24 | Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete. |
| 25 | Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-heat application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 26 | Installation of 7.5 HP S/S pumpset by Lowering inside the TW & Fitting with the 100 mm dia G.I. pipe length 36 mtr including cutting threading of pipe & clamping over the support pillars by TW clamp & conecting it with the distribution HDPE pipe line laid in under ground including fitting of bends,flanges,sockets,valves & specials joint as required with nuts bolts,rubbers insection etc.including transpotation of materials completely as per the direction of the site Engineer in charge. |
| 27 | Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete. |
| 28 | Earth work in excavation in hard soil including dresssing and breaking clods and laying in layer not exceeding 0.30 mtr depth. |
| 29 | Construction of outlet at Tank |
| 30 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 31 | 100 mm dia G.I. Bend IS No.1239(Part-II/1992) |
| 32 | 100 mm dia G.I. socket confirming to IS No.1239 (pt-II/1992) |
| 33 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 34 | 10 HP /7.5K.W.Submerssible Pumpset coupled with totally enclosed water cooled squirrel cage induction moter with delivery discharge 900 LPM at 25 mtr head with cable,cable clip,support clamp etc suitable for operation at 415+6%,-15 volt,3 phase,50 Hz,AC power supply as per the particulars mentioned in Annexure A enclosed with ISI mark |
| 35 | C I double flanged 100mm Non-return valve swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 36 | C I double flanged 100mm Sluice Valve Flanged type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 37 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 38 | control Pannel with Auto star delta starter for opreration of Squirel cage induction motor up to 10 HP & protection agaist over load single phasing with volt meter ,Ameter & MCB in complete shape etc |
| 39 | 63 Amp Main switch( IS No 4064( part-I & II) |
| 40 | 2.5 sq mm submerssible Flat cable |
| 41 | 100 mm MS Clamp for supporting G.I.Pipe |
| 42 | Supplying of 200 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 43 | 5/8 ' x12\\" Nut bolt & washer F.T. for foundation |
| 44 | 5/8 ' x3\\" Nut bolt F.T. |
| 45 | 1/2\\" x2 1/2\\" Nut bolt F.T. |
| 46 | ⅛\\" thick Rubber Insertion |
| 47 | 200x200x110 mm dia PVC Raiser Tee with all accessories |
| 48 | 200 mm dia PVC End cap |
| 49 | 200x200x200 mm dia PVC Equal Tee |
| 50 | 200 mm dia PVC Coupler |
| 51 | 3x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site. |
| 52 | Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS |
| 53 | Electrical earthing including all materials as per the direction of the Engineer-incharge |
| 54 | TW Safequard |
| 55 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia ASTM-PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion with filling of mud pit.(0 to 100.00 mtr) |
| 56 | Cost of 200mm dia PVC casing pipe ASTMconfirming to ISI (Sch.80) |
| 57 | Labour charges for cutting Transverse slot on 200 mm dia PVC ASTM pipe with slot size 1.5mm as per specification. |
| 58 | Cost of 200mm dia PVC Well Cap |
| 59 | Cost of 200mm dia PVC Cone |
| 60 | Cost of 200mm dia PVC Nipple |
| 61 | Supply of all materials, Labour & T&P for packing the bore with washed gravel size (P-6) around the well screen and pipe in good quality including cost of gravel ,conveyence ,royality etc.complete as per direction of enginer -in-charge. |
| 62 | Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 63 | Supply of all labour& T & P for lowering the 200 mm dia ( Sch-80) ASTM PVC pipes as per the necessity from ground level & fitted & fixed up in perfectly vertically position including cutting & threading of soltted pipe and fixing all jointing materials etc complete and keeping the top of the cashing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials etc |
| 64 | Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAA Cable average span 40mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required. including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 65 | Construction of Interposing Pole with as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with required No.of 11 KV T & C Disc. polymer Insulators in tension point ,& 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger, Anti Climbing Devices, including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 66 | Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender