Tender For Execution Of Electrical Works For Installation & Energisation At Narasinghpur - Ix T.W. L.I.Project Under Baleshwar Nilagiri Block In Baleshwar District.
Tender Value
8.75 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
9 days left
EMD
8750
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Electrical Works For Installation & Energisation At Narasinghpur - Ix T.W. L.I.Project Under Baleshwar Nilagiri Block In Baleshwar District.
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Display Board Size (5'0'' x4' 0'' )as per Direction of site- in-charge |
| 2 | Cost of 160x160x110 mm dia PVC raiser Tee and fitting of other accessories completely |
| 3 | Cost of Air release valve chamber |
| 4 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 5 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 6 | Installation of 10 HP S/S pumpset by Lowering inside the TW & Fitting with the 100 mm dia G.I. pipe length 36 mtr including cutting threading of pipe & clamping over the support pillars by TW clamp & conecting it with the distribution HDPE pipe line laid in under ground including fitting of bends,flanges,sockets,valves & specials joint as required with nuts bolts,rubbers insection etc.including transpotation of materials completely as per the direction of the site Engineer in charge. |
| 7 | Fitting of starter, mainswitch ,kitcut,Rotaryswitch in the pannel box and fixing the pannel box and panel foundation connecting tropodure cable with main supply line and S/S pumset including transpotation of materials to the work site etc completely including pump chamber Wiring |
| 8 | Making earthing with required earth materials like charcoal, common salt,conduit pipe, soft solder,alcape nuts and bolts,cable sockets etc including excavation of earth pits of size ( 1.20mx1.20x3.0m ) for fixing of earthing pipes of size 37.5 mm dia x 3.00 m length with required slotting in pipe and fitting with 37.5 mm dia G.I. lange including excavation of earth trench for laying of earth G.I. wire and filling the treanch and pit after fixing of pipes on complection of earth works including supply of all the materials including transpotation completely as per direction of the site Engineer in charge |
| 9 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 10 | 100 mm dia G.I. Bend IS No.1239(Part-II/1992) |
| 11 | 100 mm dia G.I. socket confirming to IS No.1239 (pt-II/1992) |
| 12 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 13 | 10 HP /7.5K.W.Submerssible Pumpset coupled with totally enclosed water cooled squirrel cage induction moter with delivery discharge 900 LPM at 25 mtr head with cable,cable clip,support clamp etc suitable for operation at 415+6%,-15 volt,3 phase,50 Hz,AC power supply as per the particulars mentioned in Annexure A enclosed with ISI mark |
| 14 | C I double flanged 100mm Non-return valve swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 15 | C I double flanged 100mm Sluice Valve Flanged type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 16 | Cost of 100 mm dia MS TW Clamp |
| 17 | Cost of 200x100 mm dia TW Cap |
| 18 | Cost of Safe quard |
| 19 | 5/8 ' x3\\" Nut bolt F.T. as per IS specification |
| 20 | 1/2\\" x2 1/2\\" Nut bolt F.T.as per IS specification |
| 21 | ⅛\\" thick Rubber Insertion as per IS specification |
| 22 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter,Ameter,MCB in complete shape including Indicator Lamp. |
| 23 | 63 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark. |
| 24 | 3 x 10sqmm Tropodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. |
| 25 | Electrical installation with electrical materials such as PVC tape,ampere tape,7/20 & 3/20 PVC copper wire,G.I flexible condute pipe,No.6 G.I wire copper cable socket and flange and petty materials etc.All matrials are as per IS. Specification |
| 26 | Cost of 2.5 mm 2 Flat Cable |
| 27 | Tool Box |
| 28 | Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 10 M long PSC Pole with 55 Sqmm AAA Cable average span 40mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required. including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 29 | Construction of Interposing Pole with as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with required No.of 11 KV T & C Disc. polymer Insulators in tension point ,& 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger, Anti Climbing Devices, including cost of all materials, labour transportation,inspection & commissioning etc. complete. |
| 30 | Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender