Tender For Execution Of Civil Works For Energisation At Agamouda T.W. L.I.Project Under Baleshwar Sadar Block In Baleshwar District.
Tender Value
6.72 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
9 days left
EMD
6727
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Civil Works For Energisation At Agamouda T.W. L.I.Project Under Baleshwar Sadar Block In Baleshwar District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge. |
| 2 | Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge. |
| 4 | Fly Ash Brick masonary in CM (1:6) in F& P |
| 5 | Dismantalling Brick or stone masonary in lime or Cement Motar under 3.0 mtr height including stacking the useful materials for reuse and removing the debris within 50m Lead |
| 6 | Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 100kg/cm2 to149kg/cm2 with dimensional tolerrance± 8% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge. |
| 7 | Dismantalling and removing old lime or cement plaster from walls including racking out joints 12 mm deep and removing the debris within 50 m lead for 9.30 sqm |
| 8 | 12mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge. |
| 9 | Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge |
| 10 | b) Lintel ,Chhaja & slab |
| 11 | Dismantalling and removing R.C.C. Column, Beams, Slab, Starcase, Landing, Lintels including stacking the useful materials for reuse and removing the debris within 50 mtr Lead. |
| 12 | R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge. |
| 13 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete. |
| 14 | Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge. |
| 15 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge. |
| 16 | Wall painting two coats with approved paint over a coat of wall cement primer of approved shade after cleaning the surface with watering, curing, cost, conveyance royalties & taxes of all materials & labour T&P required for the work etc. complete |
| 17 | Labour Charges for fitting and fixing the Iron Door & window in proper position & properly |
| 18 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete. |
| 19 | Dismantalling & removing 2.5cm thick artificial stone floring including stacking the useful materials for reuse and removing the debris within 50m lead |
| 20 | 2.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips. |
| 21 | 2.5 cm. thick grading concrete (1:2:2 ) on roof slab with 6mm size h.g chips on new work with all cost etc. complete . |
| 22 | Cost of M.S. Pannel Iron Door with M.S.Frame etc (size 1.0 mx1.98m) & window |
| 23 | Distempering two coats to walls with distermper of approved shade on new work to give an even shade including cost of distemper & labour etc. complete. |
| 24 | Finishing walls with water proofing cement paint of approved shade on new work ( 2 coats ) to give an even shade including cost of cement paint & labour etc complete. |
| 25 | Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete. |
| 26 | Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete. |
| 27 | Fitting of un plasticised 160mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-heat application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 28 | Installation of 7.5 HP S/S pumpset by Lowering inside the TW & Fitting with the 100 mm dia G.I. pipe length 36 mtr including cutting threading of pipe & clamping over the support pillars by TW clamp & conecting it with the distribution PVC pipe line laid in under ground including fitting of bends,flanges,sockets,valves & specials joint as required with nuts bolts,rubbers insection etc.including transpotation of materials completely as per the direction of the site Engineer in charge. |
| 29 | Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete. |
| 30 | Earth work in excavation in hard soil including dresssing and breaking clods and laying in layer not exceeding 0.30 mtr depth. |
| 31 | Construction of outlet at Tank |
| 32 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 33 | 100 mm dia G.I. Bend IS No.1239(Part-II/1992) |
| 34 | 100 mm dia G.I. socket confirming to IS No.1239 (pt-II/1992) |
| 35 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 36 | 10 HP /7.5K.W.Submerssible Pumpset coupled with totally enclosed water cooled squirrel cage induction moter with delivery discharge 900 LPM at 25 mtr head with cable,cable clip,support clamp etc suitable for operation at 415+6%,-15 volt,3 phase,50 Hz,AC power supply as per the particulars mentioned in Annexure A enclosed with ISI mark |
| 37 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 38 | Auto star delta starter 15HP |
| 39 | 63 Amp Main switch( IS No 4064( part-I & II) |
| 40 | 2.5 sq mm submerssible Flat cable |
| 41 | 100 mm MS Clamp for supporting G.I.Pipe |
| 42 | 200x100 mm dia MS Clamp |
| 43 | Supplying of 160 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 44 | 5/8 ' x12\\" Nut bolt & washer F.T. for foundation |
| 45 | 5/8 ' x3\\" Nut bolt F.T. |
| 46 | 1/2\\" x2 1/2\\" Nut bolt F.T. |
| 47 | ⅛\\" thick Rubber Insertion |
| 48 | 160x160x110 mm dia PVC Raiser Tee with all accessories |
| 49 | 160 mm dia PVC End cap |
| 50 | 160x160x160 mm dia PVC Equal Tee |
| 51 | 160 mm dia PVC Coupler |
| 52 | 200 x160 dia PVC reducing Tee |
| 53 | 3x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site. |
| 54 | Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS |
| 55 | Electrical earthing including all materials as per the direction of the Engineer-incharge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender