Tender For Construction Of Toilet Block At Tsolding ( North Pullu) And Development Of Park At T-Morh Under Infrastructure Development Of Various Place In Nubra Sub Division In Lieu Of Hh. Dalai Lama Visit.
Tender Value
13.60 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
0 days left
EMD
27200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Block At Tsolding ( North Pullu) And Development Of Park At T-Morh Under Infrastructure Development Of Various Place In Nubra Sub Division In Lieu Of Hh. Dalai Lama Visit.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.All kind of soil. |
| 3 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil: |
| 7 | Steel work in built up tubular (round, squareor rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes |
| 8 | Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including Kg |
| 9 | Chequerred precast cement concrete tiles 22mm thick infootpath &courtyard, jointed with neat cementslurry mixed with pigment to match the shade oftiles, including rubbing and cleaning etc. complete, on 20mm thickbedof cement mortar 1:4 (1 cement: 4 coarse sand).11.20.1 Light shade pigment using white cement |
| 10 | Supplying and stacking at site good earth including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 11 | Spreading of sludge,dump manure or / andgood earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). |
| 12 | Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass form sathick lawn free from weeds and fit form owing including supplying goodearth if needed (the goodearth shall be paid for separately). In rows 5 cm apart in either direction. |
| 13 | Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 14 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @0.90ltr/10sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture |
| 15 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 16 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.All kind of soil. |
| 17 | Dry stone pitching (any thickness) excluding cost of stones. On Horizontal |
| 18 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 19 | Random rubble masonry with hard stone laid dry in foundation, plinth &walls Laid without bond stone |
| 20 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand (zone III )derived from natural source : 4 graded stone agg 12.5 mm nominal size) derived from natural source and curing complete. |
| 21 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in cementmortar 1:6 using approved quality mud with carriage of material complete. |
| 22 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1 : 4 ( 1 cement : 6 fine sand) |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 26 | Suspended floors, roofs, landings, balconies and access platform |
| 27 | Filling available exacvated earth (excluding rock ) in trenches, plinth sides of foundation etc, in layer not excedding 20 cm in depth consolidition each deposited layer by ramming and watering lead upto 50 m and lift upto 1.5 m |
| 28 | P/F 50mm Glass wool insulation |
| 29 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Providing wood work in frames of doors, windows clearstory windows and other frames, wrought framed and fixed in position. With hold fast lugs or with hold fast lugs or with dash fasterners of the required dia and length (hold fast lugs or with dash fasteners shall be paid seperatly) second class kail wood. |
| 32 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc budloo with dash fasteners shall be paid for separately): |
| 33 | Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as perdirection of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately) |
| 34 | Providing and fixing 35 mm thick factory made laminated veneer lumber doorshutter conforming to IS: 14616 and TADS 15:2001 (Part B) fixing with butthinges of required size with necessary screws, all complete as per directions ofEngineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides)grade -1, medium density flat pressed, three layer particle board FPT- I or gradedwood particle board FPT- I, conforming to IS : 3087, bonded with BWP typesynthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS :12823, Grade 1, Type - II marked |
| 35 | Fixing double glazed incl (DGU) conforming of 5 mm thrice glass on either side with 12 mm thick inert gape in the DGU shall be processed for reputing glass processer. |
| 36 | Providing and laying 200mm thick mud pushka over talboos with 5mm thick drygrass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC |
| 37 | Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood |
| 38 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125mm |
| 39 | Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930with screws etc. complete :300x20x6 mm |
| 40 | 100x10 mm tower bolts (barrel type) |
| 41 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 42 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lidwith white vitreous china flushing cistern and C.P. flush bend. |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 44 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 45 | Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan. |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer PN-16 Pipe, 25 mm OD (SDR-7.4) |
| 47 | PN - 16 Pipe, 32 mm OD (SDR-7.4) |
| 48 | Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand of 110mm dia |
| 49 | Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand of 90mm dia |
| 50 | Providing and fixing toilet paper holder c.p brass |
| 51 | Towel rail C.P. brass 750 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail. |
| 52 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 53 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete. |
| 54 | Providing and fixing CP brass basin mixer pillar tap of approved quality and make |
| 55 | Providing and fixing CP brass wall mounted basin mixer pillar tap of approved quality and make |
| 56 | Providing and fixing CP brass stop cock of approved quality and make |
| 57 | Providing and fixing floor jalli |
| 58 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.Flexible pipe 32 mm dia. |
| 59 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 3.1 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 60 | Providing and fixing of material for the insulation of pipe with nitrile tube, tapping with cello tape, Rockwood 6 inch per side, wire mesh , polythene,tapping with cello tape aluminium sheet 26 guage 25 mm |
| 61 | 32 mm |
| 62 | providing and fixing heat tape 33 watt on PPR pipes made of denforced or chromelox or equivalent make , as approved by Engineer in charge , Complete Job. |
| 63 | providing and fixing of material for the insulation of Water storage tank with nitrile sheet , tapping with cello tape, Rockwood 6 inch per side, wire mesh polythene, aluminium sheet 26 guage cladding with dia of complete job 19mm thick nitrile sheet. |
| 64 | Providing and fixing ball valve (PPR) of approved quality, High or low pressure, with plastic floats complete.32 mm nominal bore.(PPR) |
| 65 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 66 | supplying and fixing 1 inch 3/4 inch pvc conduit /casing capping along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit. |
| 67 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor,singlecore cable in surface/ recessed medium class PVC conduit A ) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 68 | b ) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 69 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludin modular plate etc. as required. |
| 70 | b) 3 pin 5/6 A socket outlet |
| 71 | 15/16 A switch |
| 72 | 6 pin 15/16 A socket outlet |
| 73 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in 3 Module (100mmX75mm) |
| 74 | 6 Module (200mmX75mm) |
| 75 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 76 | 6 Module |
| 77 | 6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity |
| 78 | Supplying and fixing brass batten/ angle holder includingconnection etc. as required. |
| 79 | Supply and fixing LED bulb of 9 watt |
| 80 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) |
| 81 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand andmanufacture |
| 82 | Providing and fixing ball valve (PPR) of approved quality, High or low pressure, with plastic floats complete.32 mm nominal bore.(PPR) |
| 83 | Providing and fixing over head shower |
| 84 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished40 mm thick with 20 mm nominal size stone aggregate |
| 85 | Providing and fixing 15 litre geyser of approved brand and manufacture. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender