Tender For Construction Of Permanent Shed For Departmental Vehicles At Shakar Kargil.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
76000
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Permanent Shed For Departmental Vehicles At Shakar Kargil.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cmin depth,1.5min width as well as 10 sqm on plan) including getting out and disposal of excavated earth leadupto50mandliftupto1.5m,as directed by Engineer-in-charge. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like notexceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | All kinds of Soil (80% of total) |
| 4 | Ordinary Rock (20% of total) |
| 5 | Providing and lying stone soling in the bed including all sort of carriage |
| 6 | Providing and lying in position Plain cement concrete of specified grade M7.5(1:4:8) using 40mm nominal size nallah aggregate excluding cost of centering and shuttering. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in M20 (1:1.5:3) mix. |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 10 | Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate |
| 11 | Formwork for concrete casting including strutting, propping removal and stacking.. |
| 12 | R/F of RCC work including cutting placing in complete Job @1.2Quintal per cum of RCC. |
| 13 | Supplying and filling in plinth with fine sand under floor, including, watering, ramming consolidating and dressing complete. |
| 14 | Structural steel work riveted, bolted or welded in builtup sections, trusses and framed work, including and applying a priming coat of approved steel primer all complete. |
| 15 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces),excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m3 |
| 16 | Providing ridges or hips of width 60cm over all width plainG.S.sheet fixed with polymer coated J or L hooks,bolts and nuts 8mm diaG.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m3 |
| 17 | Carriage of different material from source to site of work |
| 18 | Carriage of cement and Steel by MT at an avg lead of 60 kms |
| 19 | Carriage of Sand and Bajree at an avg lead of 20 kms |
| 20 | Electric work |
| 21 | Supply installation/testing & commissioning of LED flood light(25-30W) with complete accessories . |
| 22 | S/F following modular switch/socket on the existing modular plate and switch box including connection modular plate etc. as required all complete Job |
| 23 | 16 amp switch |
| 24 | 6 pin, 16 amp Socket outlet |
| 25 | Wiring for heating point in circuit/submains wiring along with earth wire of following sizes FRLS PVC insulated copper conductor single core cable in surface. 2 x 6 sqmm + 1 x 4 sqmm earth wire |
| 26 | Providing and fixing control board including mcb and all accessories of required qty and all accessories in complete Job |
| 27 | Providing and fixing alumunium main line 2 core of approved quality as direction of engineer Incharge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender