Tender For Integrated Main Entrance Infrastructure Development Project & Interior Furniture Supply For Assam Startup-The Nest, Ambari, Guwahati
Tender Value
95.47 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
20 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Integrated Main Entrance Infrastructure Development Project & Interior Furniture Supply For Assam Startup-The Nest, Ambari, Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per directionof Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. |
| 4 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 5 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts |
| 9 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 10 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 18 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
| 19 | Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 21 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 23 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 24 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board |
| 25 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items.The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 26 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 27 | Providing, supplying, fitting and fixing 3 seater sofa (E 007 of size 2210 WX1000DX880 HT MM) as directed by the concerned department |
| 28 | Providing, supplying, fitting and fixing Podium (PLB Podium of size 600LX4000X1050 HT MM) as directed by the concerned department. |
| 29 | Providing, supplying, fitting and fixing Enrish Meeting table (Perform meeting table of Size 1800X900X750 HT MM)) as directed by the concerned department |
| 30 | Providing, supplying, fitting and fixing Enrish Meeting table (Perforın meeting table of Size 2400X1200x750 HT MM)) as directed by the concerned department |
| 31 | Providing supplying fitting and fixing Meeting chair (Comet MB) as directed by the concerned department. |
| 32 | Providing, supplying, fitting and fixing Perform cabin table (Size 15001X7500X750 HT MM)as directed by the concerned |
| 33 | Providing supplying, fitting and fixing Cabin chair (Amaze MB Grey) as directed by the concerned department. |
| 34 | Providing supplying, fitting and fixing Visitor chair (Contact project VA) as directed by the concerned department. |
| 35 | Froviding, supplying, fitting and fixing L Shape workstation (L shape NEO-50 1650/1350WX600/6000X750 HT Table top with 1200 mm HT Partition) as directed by the concerned department, |
| 36 | Providing, supplying, fitting and fixing Workstation chair (Amaze 10 MB Greyjas directed by the concerned departinent. |
| 37 | Providing supplying, fitting and fixing Collaborate cabin table loop leg (Size 1800x900x750 HT)as directed by the concerned |
| 38 | Providing, supplying, fitting and fixing Cabin chair (HELIX HB)as directed by the concerned department. |
| 39 | Providing, supplying, fitting and fixing Visitor chair (Bravo VA)as directed by the concerned department. |
| 40 | Providing supplying, fitting and fixing Cabin Sofa (Barister) 3seater sofa of size 1800LX665DX775 HT MM as directed by the concerned department. |
| 41 | Providing, supplying, fitting and fixing Cabin Sofa (Barister) 1seater sofa of size 700 LX665DX775 HT MM as directed by the concerned department. |
| 42 | Providing supplying, fitting and fixing Center table (FOS centertable of size 1050LX525DX450 HT MM)as directed by the concerned department. |
| 43 | Providing, supplying, fitting and fixing (Sharing Workstation of size 1050LX6000X750 HT MM) as directed by the concerned |
| 44 | Providing supplying, fitting and fixing Workstation chair (Amaze MB Grey) as directed by the concerned department. |
| 45 | Providing supplying, fitting and fixing Meeting table (Performmeeting table of size 1500X900X750 HT MM)as directed by the concerned department. |
| 46 | Providing supplying, fitting and fixing Meeting Chair (Comet MB) as directed by the concerned department. |
| 47 | Providing, supplying, fitting and fixing Café table (ATLAS Café table of size 1500LX800DX750 H)as directed by the concerned department |
| 48 | Providing, supplying, fitting and fixing Café chair (TANG Chair) as directed by the concerned department. |
| 49 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C |
| 50 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 51 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 52 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 53 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep |
| 54 | 150 mm X 150 mm X 60 mm deep |
| 55 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 56 | 3 pin 5/6 amp socket outlet |
| 57 | 6 pin 15/16 amp socket outlet |
| 58 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 59 | 8 Module(125mmX125mm) |
| 60 | 12 Module(200mm X 150mm) |
| 61 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 62 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.4 Module |
| 63 | 8 Module |
| 64 | 12 Module |
| 65 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. |
| 66 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door |
| 67 | 8 way (4 + 24), Double door |
| 68 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 69 | Triple pole and neutral |
| 70 | Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 71 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 72 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 73 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm |
| 74 | Supplying including installation, connection cable, as approved by the Deptt with 2x2.5 sqmm copper PR CABLE, resting and commissioning of the following POST TOP lantern of IT'66 on existing pole Structure including lamp, driver as required complete as directed and specified by the deptt. (havelis or equivalent) |
| 75 | Supplying of Fancy/decorative Wall brucket fitting suitable For CFL/LED lamp including earthing connection etc. Complete as required |
| 76 | Supplying and installation of 16W Lighting Fixtures and accessories general lighting and fixtures LED round Luminaire (Recessed Luminaire) Rev! as specified and directed by the Department. (GEM PRODUCT ID 5116877-57957607394)(ORIENT/CROMPTON/LEDURE of equivalent make) |
| 77 | Supplying with fitting and fixing of following LED Street Light Fittings, testing and commissioning street light on existing pole/Structure including driver as required complete as directed and specified by the deptt. (Crompton, Wipro, Bajaj or equivalent considering the mother items rate and specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender