Tender For Construction Of New Temporary Police Barrack And Repairs To Existing Police Barrack At Goraksh Dairy Tupadevi Phata At Trimbakeshwar Tal. Trimbakeshwar Dist. Nashik.
Tender Value
32.81 Crore
Estimated cost
Bid Submission
19 Oct 2026
7 days left
EMD
16.41 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Temporary Police Barrack And Repairs To Existing Police Barrack At Goraksh Dairy Tupadevi Phata At Trimbakeshwar Tal. Trimbakeshwar Dist. Nashik.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 8 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 9 | Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. |
| 10 | Providing and laying cement concrete flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade |
| 11 | Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories |
| 12 | Providing and fixing in position mild steel door Frame of angle 45 X 45 X 6 including Mild Steel shutters of angle frame of size 40 millimetre x 40 millimetre x 6 millimetre for fixing Mils Steel Sheet with Horizontal Middle Support of 25 X 25 X 5 millimetre Angle and 25 X 5 Mils steel Flat for fixing Mild Steel Sheet, including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete. As directed by Engineer in As per RA |
| 13 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 14 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 15 | Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 16 | Turbo Ventilator 24\\" |
| 17 | Providing and fixing fly proof mesh shutter toventilator / window using CCTW members of size 45 x 22 mm for frame work and 35 x 22 mm for middle support and fixing fly proof mesh on it and covering TW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete |
| 18 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 19 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 20 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 21 | Providing and fixing board displaying information, such as \\"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\\", having rectangular shape of 1.80m x 1.20m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class C (Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive. Retro reflective sheeting with specified background, border and back side reto reflective symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Class _C_ (Type XI Micro prismatic grade sheeting)) shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. |
| 22 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. |
| 23 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 24 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 25 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. |
| 26 | Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. |
| 27 | Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 28 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete |
| 29 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) |
| 30 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. |
| 31 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 32 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 33 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. |
| 35 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 36 | Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 37 | Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 38 | Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. |
| 39 | Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kilogram/One Running Metre, Aluminium angle of size 15 mm x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing and as directed by Engineer in charge etc.complete. |
| 40 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 41 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 42 | Providing and fixing push cock (Self closing tap) symet type of 20 mm dia. including necessary socket, testing etc. complete. |
| 43 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 44 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 45 | Excavation for roadway in hard rock by controlled blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stocking as directed.(Inculding 50% Utilisation of useable Excavated material) |
| 46 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller. |
| 47 | Providing Stainless Steel Pedal Dustbin havingl Storage Capacity 10 Ltr. |
| 48 | Providing Stainless Steel (Grade AISI 304) Aquaguard storage type water Cooler, Cooling Capacity 60 (Litres/Hour) & Storage Capacity 120 Ltr. |
| 49 | Bunk Bed Including Cupboard - Providing and fixing Bunk Bed of Size 2015 L X 915 W X 1750 H Under structure: The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Mattress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo enamled paint finish of suitable color. Suitable size of 19 mm thickness commercial plywood for mattress suporting panel to be provided as per approved design and As per Separate RA Attached |
| 50 | Dining Table- Providing and supplying 6-Seater Dining Table of size 1.8 L X 0.8 D X 0.75 H in mtr. With 8 folding space saving seating stool, all metal structure made in CRCA square tube 46x46x1.6mm thick with powder coated finish of min 60 microns, with ABS shoes for legs ensuring noise-free operation, improved stability, smooth movements, rust-resistant and better strength and Top made in 1.5mm thick SS 202 grade Sheet and the seating stool top of size dia 300mm in 202 grade Sheet fitted necessary hardware as per approved design and as per instruction of Engineer-In-Charge-Complete.As per Separate RA Attached |
| 51 | Engaging Mazdoor on Site |
| 52 | Engaging Plumber on Site |
| 53 | Engaging Fabricator on Site |
| 54 | Engaging Electrician on Site |
| 55 | Engaging JCB on Site |
| 56 | Engaging Tractor on Site |
| 57 | Engaging House Keeping on Site |
| 58 | Engaging Water Tanker(9000 Ltr.) on Site |
| 59 | Engaging Truck on Site |
| 60 | Logo of Maharashtra Police |
| 61 | Making 150 millimetre diametre Bore in all types of Strata with head core including survey for fixing location of bore transporting of machinery and platform, providing laying fixing casing of 150 millimetre diametre Unplacticised Poly Vinyl Chloride Pipe (CS as per IS:12815) having outer diametre 165 and minimum thickness of 5.70 to 6.50 millimetre diametre along with grouting, checking capacity by flushing test etc. complete Making Bore in all types of Strata |
| 62 | Survey for Fixing Location |
| 63 | 150 mm Dia UPVC Casing |
| 64 | Checking Capacity by Flushing test |
| 65 | Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 290 LPM discharge at 112 to 12 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP |
| 66 | Supplying and erecting flat flexible 3 core 2.5 square millimeter Poly Vinyl Chloride sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete |
| 67 | Supplying and erecting D.O.L. Starter 400 Volt. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 Horse Power (Similar to L & T make MK-1 DOL Model) |
| 68 | Providing and supplying Unbranded Cotton Mattress, rectangular in shape, suitable for use on single beds in hostels, barracks, guest houses, hospitals, residential quarters, and government establishments. The mattress shall have finished dimensions of 183 cm length × 91 cm width × 7.5 cm thickness, with a minimum mass/weight of 12 kilogram. The inner cushioning/filling material shall consist of new white cotton wadding, completely free from dust, foreign matters, odour, toxicity, and lumps, maintaining a uniform density throughout. The outer body cover (casing) shall be manufactured from cloth cotton drill as per BIS specification no. IS : 177 - 1989, Variety no. 3 (mercerized and preshrunk), finished in Dark Navy Blue colour (without mandatory BIS marking on casing fabric). The mattress shall feature proper quilting with a maximum quilting distance of 12 cm, neatly stitched using white cotton sewing thread as per IS : 1720, 165 d tex × 6 (36s/6), with 37 to 43 stitches per decimetre (dm). The mattress shall be comfortable, resilient, durable, free from manufacturing, stitching, or filling defects, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Cotton Mattresses • Brand: Unbranded • Dimensions (L × W × T): 183 cm × 91 cm × 7.5 cm • Mass of Mattress (Min): 12 kilogram • Inner Cushioning Material (Filling): New white Cotton wadding free from dust and other foreign matters • Filling Characteristics: Free from odour and toxicity; uniform density and free from lumps • Body Cover (Casing): Cloth Cotton Drill as per BIS specification no. IS : 177 - 1989, Variety no. 3 (Mercerized and Preshrunk) • Colour of Casing: Dark Navy Blue • BIS Marking (For Body Casing fabric): No • Quilting: Yes (Quilting distance: Maximum 12 cm) • Stitching Thread: Cotton Sewing thread as per IS : 1720, 165 d tex × 6 (36s/6) white • Stitches per dm: 37 to 43 • Logo Marking: No (Not Applicable) • Application: Barracks, hostels, hospitals, guest houses, and institutional single bedding use |
| 69 | Providing and supplying REDLON or equivalent brand Handloom Cotton Bed Sheets, manufactured by handloom process in strict conformity with BIS Specification No. IS 745:2021 (Latest) Variety No - 6 (260 g/m²), suitable for use in hostels, guest houses, hospitals, barracks, residential quarters, and government establishments. The bed sheet shall have finished dimensions of 250 cm length × 154 cm width and shall be supplied in a White Bleached finish. The transverse ends shall be neatly hemmed with a minimum hemming depth of 20 mm using 100 dtex × 6 sewing thread conforming to IS: 1720. The product shall carry the authentic Handloom Mark and have valid BIS Certification. Provision shall be made for logo/totem marking and screen-printed identification markings (longitudinal running strips) as per buyer's specific requirements. Conformity shall be supported by valid test reports from a NABL/ILAC accredited or Central Government Laboratory, and the supplier shall agree to provide advance sample(s) for buyer's approval before commencement of supply. The bed sheet shall be comfortable, skin-friendly, durable, washable, free from weaving defects, oil stains, or blemishes, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Handloom Cotton Bed Sheets • Brand: REDLON or equivalent• Governing Specification: BIS Specification No. IS 745:2021 (Latest) • Variety as per BIS Specification: Variety No - 6 (Mass: 260 g/m²) • Manufacturing Type: Handloom • Size (Length × Width): 250 cm × 154 cm • Colour: White Bleached • Hemming: Depth of transverse ends hemming minimum 20 mm • Sewing Thread: 100 dtex × 6 as per IS: 1720 • Handloom Mark: Yes • BIS Certification: Yes • Logo / Totem Marking: Size, design, type, and location as per buyer's requirement • Screen Printed Identification Marking: Longitudinal running strips as per buyer's requirement • Test Reports: Available from NABL/ILAC accredited or Central Government Lab • Advance Sample: Agree to provide advance sample for buyer's approval before supply (Yes) • Application: Hostels, hospitals, barracks, guest houses, and institutional bedding use |
| 70 | Providing and supplying Unbranded Cotton Pillow, rectangular in shape, suitable for use in hostels, guest houses, hospitals, barracks, residential quarters, and government establishments. The pillow shall be of size 33 cm length × 56 cm width, having a minimum mass/weight of 1.5 kilogram. The inner cushioning/filling material shall consist of new white 100% cotton fibre, completely free from dust, foreign matter, odour, toxicity, and lumps, maintaining a uniform density throughout. The outer body cover (casing) shall be manufactured from cloth cotton drill as per BIS specification no. IS : 177 - 1989, Variety no. 3 (mercerized and preshrunk), finished in White colour (without mandatory BIS marking on casing fabric). Stitching shall be neatly executed using white cotton sewing thread as per IS : 1720, 165 d tex × 6 (36s/6), with 37 to 43 stitches per decimetre (dm). The supplier shall provide advance sample(s) for buyer's approval before commencement of bulk supply. The pillow shall be comfortable, resilient, durable, free from manufacturing and stitching defects, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Cotton Pillow • Brand: Unbranded • Size: 33 cm × 56 cm • Mass of Pillow (Min): 1.5 kilogram • Inner Cushioning Material (Filling): New white 100% Cotton fibre free from dust and other foreign matter • Filling Characteristics: Free from odour and toxicity; uniform density and free from lumps • Body Cover (Casing): Cloth Cotton Drill as per BIS specification no. IS : 177 - 1989, Variety no. 3 (Mercerized and Preshrunk) • Colour of Casing: White• BIS Marking (For Body Casing fabric): No • Stitching Thread: Cotton Sewing thread as per IS : 1720, 165 d tex × 6 (36s/6) white • Stitches per dm: 37 to 43 • Logo Marking: Size, design, and location of logo as per buyer's requirement (Type of Logo: Not Applicable) • Advance Sample: Agree to provide advance sample(s) for buyer's approval before commencement of supply (Yes) • Application: Barracks, hostels, hospitals, guest houses, and institutional bedding use |
| 71 | Providing and supplying Unbranded Barrack Blanket, manufactured in strict conformity with Defence Joint Services Specification No. JSS 7210-24: 2018 (Third Revision), suitable for use by defence personnel, police barracks, security establishments, disaster management forces, hostels, and government quarters. The blanket shall be supplied in Natural Grey colour and shall be properly moth-proofed to prevent damage during prolonged storage and routine use. The item/supplier shall be registered with the competent authority and provide proof of valid registration. The supplier shall agree to provide advance sample(s) for buyer's approval before the commencement of bulk supply. The blanket shall be warm, heavy-duty, durable, comfortable, free from weaving defects, fraying edges, tears, or odours, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Blanket Barrack • Brand: Unbranded • Governing Specification: Defence Joint Services Specification No. JSS 7210-24: 2018 (Third Revision) • Colour: Natural Grey • Moth Proofing: Yes • Registration with Authority: Yes • Advance Sample: Agree to provide advance sample(s) for buyer's approval before commencement of supply (Yes) • Application: Defence, police barracks, security forces, temporary accommodations, and institutional bedding use |
| 72 | Providing and supplying Nayasa or equivalent brand HDPE Plastic Bucket, manufactured in strict conformity with IS 3730, suitable for domestic, commercial, institutional, and general utility water storage and cleaning applications. The bucket shall have a holding capacity of 20 Litres (tolerance $\pm 10\%$). The body of the bucket shall be round when viewed from the top, manufactured from Coloured High-Density Polyethylene (HDPE) using injection moulding grade 45 MA (as per IS 7328), and shall be UV protected for enhanced durability and weather resistance. It shall be provided with a sturdy handle made of HDPE of grade 45 MA (as per IS 7328) designed for easy lifting and carrying under full load. The bucket can be supplied in any standard approved colour finish as per requirement. It shall be non-food grade, crack-resistant, impact-resistant, washable, durable, suitable for regular daily use, free from moulding defects, burrs, or sharp edges, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: HDPE Bucket • Brand: Nayasa or equivalent• Governing Specification: Conforming to IS 3730 • Bucket Body Material: Coloured HDPE • HDPE Grade for Injection Moulding: 45 MA (as per IS 7328) • Handle Material: HDPE • Grade of HDPE Handle: 45 MA (as per IS 7328) • Capacity per Bucket: 20 Litres (Tolerance: $\pm 10\%$) • Shape (when viewed from top): Round • Colour: Any standard colour • UV Protected Bucket: Yes • Food Grade Quality Material Bucket: No • Application: Cleaning, sanitation, water handling, and general utility use in offices, hostels, and residential/public premises |
| 73 | Providing and supplying FROSTY or equivalent brand HDPE Plastic Bucket, manufactured in strict conformity with IS 3730, suitable for domestic, commercial, institutional, and general utility water storage and cleaning applications. The bucket shall have a holding capacity of 5 Litres (tolerance +- pm 10%). The body of the bucket shall be circular (round) when viewed from the top, manufactured from Coloured High-Density Polyethylene (HDPE) using injection moulding grade 45 MA (as per IS 7328), made of food-grade quality material, and UV protected for enhanced durability and weather resistance. It shall be provided with a sturdy handle made of HDPE of grade 45 MA (as per IS 7328) designed for easy lifting and carrying under load. The bucket can be supplied in any standard approved colour finish as per requirement. It shall be crack-resistant, impact-resistant, washable, lightweight, durable, suitable for regular daily use, free from moulding defects, burrs, or sharp edges, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: HDPE Bucket • Brand: FROSTY or equivalent• Governing Specification: Conforming to IS 3730 • Bucket Body Material: Coloured HDPE • HDPE Grade for Injection Moulding: 45 MA (as per IS 7328) • Handle Material: HDPE • Grade of HDPE Handle: 45 MA (as per IS 7328) • Capacity per Bucket: 5 Litres (Tolerance: +- pm 10%) • Shape (when viewed from top): Circular (Round)• Colour: Any standard colour • UV Protected Bucket: Yes • Food Grade Quality Material Bucket: Yes • Application: Domestic, office, institutional, sanitation, and utility water handling |
| 74 | Providing and supplying HRITIK TRADERS Or Other Domestic Bathroom Mug, manufactured from good-quality durable Natural High-Density Polyethylene (HDPE) food-grade material, suitable for daily domestic, sanitation, bathroom, office, hostel, and public premises use. The mug shall be round cylindrical in shape and shall have a holding capacity of 500–1000 ml. It shall be designed with an ergonomic integrated handle to ensure a firm grip and easy handling during water pouring. The mug can be supplied in any standard single colour finish as per requirement/availability. It shall be lightweight, washable, crack-resistant, chemical-resistant, durable, suitable for regular daily utility use, free from rough edges or manufacturing defects, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Domestic Bathroom Mug • Brand: HRITIK TRADERS Or Other• Material: Natural HDPE • Food Grade Quality Material: Yes • Shape & Design: Round Cylinder • Capacity: 500–1000 ml• Colour: Any standard colour• Application: Domestic bathroom, sanitation, hygiene, and general utility water handling |
| 75 | Free Standing Table @ 1200Lx600Dx750HTProviding and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, |
| 76 | Single Bed @ 2025LX 1000DX 650H Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. |
| 77 | Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 78 | Plastic Chairs Nilkamal/Equivalent |
| 79 | Providing and supplying Nilkamal Mobile Container for Solid Waste, manufactured in conformity with IS 12402, finished in a distinct Green colour, suitable for solid waste collection, storage, and movement at offices, municipal areas, government establishments, residential complexes, and public premises. The container shall have a nominal capacity of Class A: 240 Litres. The container shall be classified as Class A – Container with two fixed wheels (trolley type) and categorized as Normal Type (N) designed for waste of average density 0.2 kg/dm³ and maximum density up to 0.4 kg/dm³. It shall strictly comply with the overall dimensions as per Clause 6.2.1, Table 1 of IS 12402 (Part 1). The container shall be fitted with heavy-duty fixed wheels/castors of 200 mm diameter and provided with a control device for the purpose of towage to facilitate smooth mobility and transportation. The container shall be designed without a plugged drainage outlet (continuous solid base) and without a locking device (N.A.). It shall be provided with standard frontal and ventral gripping systems, along with a lateral gripping system, ensuring full compatibility with mechanical emptying and lifting equipment. The mobile waste container shall be rugged, durable, impact-resistant, suitable for regular daily municipal and institutional use, free from all manufacturing defects, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Mobile Container for Solid Waste • Brand: Nilkamal• Colour: Green• Conformity to Indian Standard: As per IS 12402 • Classification: Class A - Container with two fixed wheels (Trolley type) • Type: Normal Type (N): for waste of average density 0.2 kg/dm³ and of maximum density 0.4 kg/dm³ • Nominal Capacity of Container: Class A: 240 Litres • Overall Dimensions of Container: As per Clause 6.2.1, Table 1 of IS 12402 (Part 1) • Diameter of Wheel/Castor: 200 millimeter • Plugged Outlet for Washing/Draining: Without • Locking Device: N.A. • Control Device for Towage: With • Frontal and Ventral Gripping Systems: Yes • Other Gripping System: Lateral • Application: Municipal, commercial, institutional, and outdoor solid waste collection/handling |
| 80 | Providing and supplying SHEETAL or Other Mobile Container for Solid Waste, manufactured in conformity with IS 12402, finished in a distinct Blue colour specifically designated and suitable for dry waste collection, segregation, storage, and movement at offices, municipal areas, government establishments, residential complexes, and public premises. The container shall have a nominal capacity of Class A: 240 Litres. The container shall be classified as Class A – Container with two fixed wheels (trolley type) and categorized as Normal Type (N) designed for waste of average density 0.2 kg/dm³ and maximum density up to 0.4 kg/dm³. It shall strictly comply with the overall dimensions as per Clause 6.2.1, Table 1 of IS 12402 (Part 1). The container shall be fitted with heavy-duty fixed wheels/castors of 200 mm diameter and provided with a control device for towage to facilitate smooth mobility and transportation. It shall be equipped with a secured locking device, a plugged drainage outlet at the bottom for easy cleaning and washing, and standard frontal, ventral, and lateral gripping systems for compatibility with mechanical lifting and emptying mechanisms. The mobile waste container shall be rugged, durable, impact-resistant, suitable for heavy-duty daily municipal/institutional usage, free from all manufacturing defects, and supplied complete in all respects as per the specified requirements. Technical Details:•Product: Mobile Container for Solid Waste •Brand: SHEETAL•Colour: Blue (for Dry Waste)•Waste Type Application: Dry Waste Segregation & Collection•Conformity to Indian Standard: As per IS 12402 •Classification: Class A - Container with two fixed wheels (Trolley type) •Type: Normal Type (N): for waste of average density 0.2 kg/dm³ and of maximum density 0.4 kg/dm³ •Nominal Capacity of Container: Class A: 240 Litres •Overall Dimensions of Container: As per Clause 6.2.1, Table 1 of IS 12402 (Part 1) •Diameter of Wheel/Castor: 200 millimeter •Plugged Outlet for Washing/Draining: With •Locking Device: Yes •Control Device for Towage: With •Frontal and Ventral Gripping Systems: Yes •Other Gripping System: Lateral •Application: Municipal, commercial, institutional, and outdoor dry solid waste collection/handling |
| 81 | Providing and supplying Bharvi or other Waste Container, manufactured from good-quality durable High-Density Polyethylene (HDPE) material, suitable for efficient waste collection and disposal at offices, government buildings, residential premises, healthcare facilities, and other commercial or public areas. The container shall have a storage capacity of 20 litres (with an allowable tolerance of +- 10%). The container shall be constructed with non-perforated (solid) walls to ensure leak-proof containment of wet and dry waste, and shall be provided with a swing-type lid for convenient, hygienic, and hands-free disposal while keeping waste concealed. The container shall be supplied in a single red colour finish, suitable for standard color-coded waste segregation. It shall be provided with an integrated, sturdy handle for convenient lifting, manual handling, and relocation. The container shall be designed for stationary floor placement without castor wheels and with a continuous solid bottom without a plugged drainage/washing outlet to prevent leakage. The waste container shall be robust, impact-resistant, chemical-resistant, washable, durable, suitable for regular daily use, free from manufacturing defects, and supplied complete in all respects as per the specified requirements. Technical Details:• Product: Waste Container / Dustbin • Brand: Bharvi• Material of Container: High-Density Polyethylene (HDPE) • Container Capacity: 20 Litres (Tolerance: pm +- 10%) • Lid Type: Swing type • Colour of the Container: Red • Wall Type: Non-Perforated (Solid) • Handle: With • Provision of Castor: No • Plugged Outlet for Washing and Draining: Without • Application: Indoor/outdoor waste collection, offices, public and commercial premises use |
| 82 | Providing and supplying Unbranded Plastic Door Mat, rectangular in shape, made of good-quality durable plastic material, suitable for use at entrances of offices, government buildings, residential premises and other public areas. The mat shall be of 90 cm length × 60 cm width, with a thickness of 25 mm and mass per square metre of 1000 gm. The weight of the mat shall be approximately 1000 gm. The mat shall be provided with rubber lining, having a single green colour finish. It shall have a suitably textured/raised surface for effective removal of dust, dirt and moisture from footwear and shall provide good anti-skid properties. The mat shall be washable, water-resistant, lightweight, flexible, durable and suitable for regular daily use. It shall have properly finished edges, be free from manufacturing defects and shall be supplied complete in all respects as per the specified requirements.Technical Details:Material: PlasticShape: RectangularSize: 90 cm × 60 cmThickness: 25 mmMass per Sq. M.: 1000 gmWeight of Mat: 1000 gmColour: Green (Single Colour)Rubber Lining: WithApplication: Entrance/doorway, office and public building use |
| 83 | WC & Urinal Block |
| 84 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 85 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 86 | Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 87 | Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 88 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) |
| 89 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete. |
| 90 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete. |
| 91 | Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 92 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) |
| 93 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 94 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 95 | Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant |
| 96 | Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. |
| 97 | Providing , laying and fixing ,jointing Eco- drain 200 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees tees, coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. |
| 98 | Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 99 | 500 KLD STP ON RENTAL BASIS– Detailed Specification.Design,Supply,Eraction Testing & Commissioning of Semi Automatic/ Fully Automatic 500 kld Sewage treatment plant on purely RENT BASIS.Designing, providing, constructing, hydraulic testing, commissioning and giving satisfactory trials of required Sewage Treatment Plant (STP) with advance technology and process with sewage handeling capacity of 50 kld per day. consisting of Screen chamber, Oil &Grease trap, Primary treatment tanks (including manholes, vent pipes and graded gravel media) and Secondary treatment tanks (SBBR) (including gravel media, PVC sheets, wetland plants, plastic mesh, etc. as required.) tank, intermediate and treated water tank, sludge recirculation pump and pipe network, room for tertiary treatment unit, E&M works for tertiary treatment including associated piping work, internal pathways, wire fencing, etc. complete as turnkey job as directed by Engineer-in-charge. Sewage Treatment Plant (STP) to be designed to treat the row water sewage with the characteristics specified in table number \\"A\\" to produce the treated sewage with characteristics specified as mentioned in table number \\"B NOTE: only eletrical supply is in client scope. \\"A\\" Raw Sewage Characteristics: Temperature - Ambient pH - 5.5-9.0 BOD5 - 300 mg/L COD - 600 mg/L Oil &Grease 600 mg/L \\"B\\" Treated Sewage Characteristics: Temperature - Ambient pH - 6.5-8.5 BOD5 - < 30 mg/L COD - < 40 mg/L Oil & Grease - < 10 mg/L NOTE: Scope of service provider.1.Rental Services should be inclusive of all legal charges and taxex.2.Transportation, Loading & Unloading, commissioning of total system for entire period and after contract decommissioning are Inclusive in Prices. 3.Contract Period - 1 Years minimum. 4.Operation and maintenance of the plant shall be in the scope of service provider. 5.Routine operating consumables and chemicals required for operation of the STP shall be in the scope of service provider. 6.Collection, handling, transportation and disposal of sludge generated from the STP shall be in the scope of service provider. 7.STP plant operate in 03 shifts and 7 days of a week. (08 hours per shift).No weakly Off. (plant will operate 7 days in weak)8.service provider ensure the treated water parameters which can be directly dischareg to open ground.9.Service provider should maintain logbooks for operational details and keep records at plant. 10. All tools, tackles, labour, and consumables required for successful operation and required civil work of the entire plant in the scope of service provider. |
| 100 | Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester.Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33%Percentage of polyester resin: - 66.67%Water absorption (as per ASTM):-0.30%Flammability as per ASTMTensile strength:-115 MPASpecific Gravity at 25 degree centigrade 1.45Izod impact strength:-65KJ/M2Heat defection/distort temperature:-65deg CCorrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mmOutlet pipe size rigid PVC:-80mmGas outlet rigid PVC with Valve: 20mmBacteria immobilization PVC mattes (on all partition)With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below e) Up to 60 user size (2.4mx1.25mx1m), Capacity of Biodigester:-3000 liters, Area of top, bottom and side walls: - 13.30 sq.m, Area of partition walls: 3.75sq.m, Total weight of FRP: - 139.95 Kilogram, Bacteria inoculums quantity: - 1000 liters, Minimum thickness of side walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm |
| 101 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 102 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) |
| 103 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) |
| 104 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 105 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 106 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 107 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 108 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 109 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). |
| 110 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. a. 600 mm dia made out of 3mm aluminum composite material with 0.25 mm skin thickness on either side |
| 111 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of ____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm made out of 3mm aluminum composite material with 0.25 mm skin thickness on either side |
| 112 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 113 | Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. |
| 114 | Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. |
| 115 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 116 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 117 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 118 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 119 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 120 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / Mild Steel Sheet of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 millimetre square at 10 centimetre Centre to Centre) |
| 121 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 122 | Providing and fixing Plain Galvanised Iron sheets of 1.21 millimetre thickness (18 B.W.G.) of approved make for roofing without wind ties including fastening with galvanised iron screws and bolts and lead and bitumen washers as per drawing complete. Spec. – As directed by Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender