Tender For Repairing Of Quarter No 398,401,404,406 And 408 At Tilatand Township Under Govindpur Area
Tender Value
5.73 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
7200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Quarter No 398,401,404,406 And 408 At Tilatand Township Under Govindpur Area
BOQ
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Distempering with dry distemper of approved brand and manufacture (one or more coats)and of required shade on old work to give an even shade. |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work |
| 4 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle ironand 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 5 | P and F 1 mm thick ms sheet window with grills |
| 6 | 25 mm thick cement concrete flooring |
| 7 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and the cost of cutting chases and making good thesame including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metres lead |
| 10 | 12 mm cement plaster of mix : 1:6 (1 cement: 6fine sand) |
| 11 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement :5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 13 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 15622 of approved makein colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqmincluding pointing the joints with white cement and matching pigment etc., complete. |
| 14 | Providing and fixing white vitreous china water closet squatting pan (Indian type)Orissa pattern W.C. pan of size 580x440 mm |
| 15 | Removing white or colour wash by scrapping and sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete |
| 16 | having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainlesssteel screws, joints mitred and Plastic welded. The hinge side vertical of the framesreinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wallthickness and 3 nos. stainless steel hinges fixed to the frame complete as permanufacturer’s specification and direction of Engineer- in-charge |
| 17 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollowsection of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on bothsides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steelscrews. The styles of the shutter reinforced by inserting galvanised M.S. tube of size20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, auPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed tothe shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filledwith a uPVC multi-chambered single panel of size not less than 620 mm, having over allthickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically andtie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened withnuts and washers, complete as per manufacturer's specification and direction of Engineerin-charge. (For W.C. and bathroom door shutter |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills, facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mmthick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding andpolishing to edges to give high gloss finish etc. complete at all levelsArea of slab over 0.50 sqm |
| 19 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingioIS :12894, in super structure above plinth and upto floor V level.6.45.1 Cement mortar 1 : 34(1 cement : 4 coarse sand) |
| 20 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion ofEpoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 21 | for one no quarter 97156.71 for total 5 quarters |
| 22 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender