Tender For Structural Repair Works To Uttarpara Staff Quarter Building Including Replacement Of C.I. Pipes, Repairs To Steel Windows And Alllied Civil Works At Uttarpara Te Compound, Hooghly
Tender Value
21.85 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
6 days left
EMD
43718
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Structural Repair Works To Uttarpara Staff Quarter Building Including Replacement Of C.I. Pipes, Repairs To Steel Windows And Alllied Civil Works At Uttarpara Te Compound, Hooghly
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 4 | Of area 3 sq. metres and below |
| 5 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 6 | 100 mm dia pipe |
| 7 | 150 mm dia pipe |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Carriage of materials by Mechanical Transport including loading, unloading and stacking : |
| 10 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 12 | Columns, piers, abutments, pillars, posts and struts. |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 17 | Weather shade, Chajjas, corbels etc., including edges |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 19 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 20 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 21 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections |
| 22 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 23 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 24 | Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. |
| 25 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : |
| 26 | 4.0 mm thick glass panes. |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 28 | 75 mm diameter |
| 29 | 110 mm diameter |
| 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 31 | Single tee without door -75x75x75 mm |
| 32 | Single tee without door -110x110x110 mm |
| 33 | Bend 87.5° -75 mm bend |
| 34 | Bend 87.5° -110 mm bend |
| 35 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 36 | 75 mm |
| 37 | 110 mm |
| 38 | Grading roof for water proofing treatment with |
| 39 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 40 | 12 mm cement plaster of mix : |
| 41 | 1:4 (1 cement: 4 fine sand) |
| 42 | 1:6 (1 cement: 6 fine sand) |
| 43 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 44 | 1:6 (1 cement: 6 fine sand) |
| 45 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 46 | Applying priming coat : |
| 47 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 48 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 49 | Two or more coats on new work. |
| 50 | Renewal of old putty of glass panes (length) . |
| 51 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 52 | 75 mm average thickness |
| 53 | 50 mm average thickness |
| 54 | 25 mm average thickness |
| 55 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 56 | Bars upto 12 mm diameter |
| 57 | Bars above 12 mm diameter |
| 58 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 59 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 60 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 61 | 12 mm average thickness. |
| 62 | 25 mm average thickness in 2 layers. |
| 63 | 50 mm average thickness in 3 layers. |
| 64 | Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. |
| 65 | Wooven PVC cloth |
| 66 | Providing and fixing two point M.s oxidised Handle of Steel windows as directed all complete. |
| 67 | Providing and fixing oxidised M.S. casement stays (straight peg type) 250 mm weighing not less than 150 gms. with necessary screws etc. complete. |
| 68 | Renewing hinge of steel shutter including taking out old one by cutting, fixing new hinge by welding and making good complete. |
| 69 | Renewing M.S Members of steel shutter by Welding including taking out old ,mending good damages complete, including taking out and refixing glass panes. |
| 70 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 71 | 160 mm diameter |
| 72 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 73 | 160 mm diameter |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 75 | Bend with Door =160 mm dia |
| 76 | Providing and fixing soil waste and vent pipes : |
| 77 | 110 mm dia UPVC Soil Waste pipe conforming to IS:13592 1992 (TYPE-B) manufactured by Supreme Industries Limited or equivalent. |
| 78 | Uprooting and removing small plants from the surface of walls, parapet, etc. at any height by cutting chase for removing roots and using necessary chemicals etc. to prevent further growth of plants and mending good damages complete. |
| 79 | a) Small plant of girth of exposed stem up to 75mm |
| 80 | Felling of trees like banyan, pipul etc from compound walls, building walls, cornices etc by making scaffolding where necessary including cutting of trunks and branches, application of chemicals/weedicides to the remaining portion to kill the growth of tree and ultimately removing the roots from the walls by cutting walls and mending good complete. ( The rate is inclusive of the mending good the walls with bricks/concretes/plasters and disposing of branches/trunks to vats inside compound for further disposal) |
| 81 | a) Of girth above 30 cm upto 60 cm (measured above 1.0 m from GL ) |
| 82 | Erection of single layer bamboo-scaffolding made of average 75 mm dia bamboos with adequate bracing, ties, ropes etc. for strong, stable and workable scaffolding for specified jobs ( above GF beyond 4.00m height) like replacement of sewage/RW pipes & accessories, replacement of hinges steel windows , special repairs, etc including shifting , dismantling the scaffolding after the job is done and clearing the site complete as per the direction of the Engineer-in-charge. [ to be Paid only once for all special works] |
| 83 | Applying anti-rust passive coating (like Sika Rustop or equivalent) over reinforcement bars after thorough cleaning of reinforcement complete as per direction of Engineer-in-charge. |
| 84 | Up to 25 mm dia bars |
| 85 | Reinforcement for Retrofitting/ rehabilitation work including straightening, cutting and placing in position by welding complete as per direction of Engineer-in-charge. |
| 86 | Above plinth level- Thermo-Mechanically Treated bars. |
| 87 | Credit for taking away dismantled unserviceable materials : |
| 88 | Dismantled C.I. pipe upto 150 mm dia |
| 89 | Dismantled steel materials Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender