Tender For Proposed Accelerograph Room At Dam Site And Providing Foundation & Supporting Arrangement For 03 Nos. Ews (Early Warning System) At Teesta Low Dam-Iv Power Station, Kalijhora, West Bengal
Tender Value
2.86 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
13 days left
EMD
6000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Accelerograph Room At Dam Site And Providing Foundation & Supporting Arrangement For 03 Nos. Ews (Early Warning System) At Teesta Low Dam-Iv Power Station, Kalijhora, West Bengal
BOQ
| Sl. No. | Item Description |
| 1 | Providin gand laying cement concrete inretaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:2:4 (1Cement: 2 coarse sand (zone-III) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class Designation 7.5 in superstructure above plinth level up to floor Vlevel in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 3 | Providingand laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½: 3 (1 cement: 1½ coarsesand (zone-III). Derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer all complete. |
| 8 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand). |
| 9 | 12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand). |
| 10 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement: 6 fine sand). |
| 11 | Finishing with Deluxe Multi surface paint system for interiors and Exteriors using Primer as per manufacturers specifications: Two or more Coats applied on walls @ 1.25 ltr/ 10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm. |
| 12 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 Mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 13 | Fixed window / ventilator without mullion / transom: Using R1 serieswith frame (33mm & above) x (35mm & above). (Height up to 0.90 metre). |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 15 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidized as per IS 1378): 125 mm. |
| 16 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378): 250x16 mm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender